+421 950 333 113info@handymade.storeHandymade Days: −10 % on all ready-made productsShop now

Candle fragrance oils

Fragrance Oil, Mandarine & Chilli Pepper, 1 l

Pack size10 ml100 ml500 ml1 l

The Mandarin & Chilli fragrance oil combines the juicy citrus scent of mandarin with a warm, spicy chilli note. full description

AvailabilityPre-order
Product codeVO332_1000
€91.99incl. VAT€91.99/l

Lowest price in the last 30 days: €91.99

Pre-orderThis variant is currently out of stock — your order will be a pre-order and delivery may take longer.

Product description

The Mandarin & Chilli fragrance oil combines the juicy citrus scent of mandarin with a warm, spicy chilli note. This cosmetic grade fragrance composition of European origin is used for scenting soaps, body care products, perfumes and candles, when the finished product should smell fresh and slightly piquant at the same time.

It is added at the end of production, in the cooling phase or afterwards to the finished base, and it is intended for both rinse-off and leave-on products.


Key properties

  • Citrus and spicy character – mandarin forms the fresh, sweetish citrus component, while chilli adds a warm accent that moves the fragrance from ordinary citrus towards a warmer result.
  • Oil-soluble and alcohol-soluble – it mixes into oil bases, balms, soap base and alcohol-based perfumes. It does not dissolve in water, so water-based products need a solubiliser.
  • Wide range of IFRA categories – the certificate covers categories from lip products to candles, each with its own maximum permitted usage rate.
  • Tested behaviour in cold process soap – in a practical test it did not accelerate trace and did not discolour the soap.

Use in formulations

There is no single universal usage rate. The manufacturer does not state a recommended range, and the maximum amount in the finished product is determined by the IFRA limit for the category the product belongs to. A lip balm (category 1) has a different limit from a shower gel (category 9) or a candle (category 12). Within this limit, you can fine-tune the final intensity of the fragrance on a small test batch.

The limits for all IFRA categories are listed in the IFRA certificate in the Product documentation section. Before calculating your formulation, check which category your product belongs to, as this number determines the upper limit of the usage rate.

In creams, lotions and other emulsions, the fragrance oil is added only after cooling, in the cooling phase, while stirring continuously. In anhydrous products such as balms, body butters and massage oils, it is mixed into the oil component towards the end of preparation, when the base is no longer hot. In alcohol-based perfumes and colognes, it dissolves directly in ethanol. Toners, hydrosol sprays and water-based air fresheners need a solubiliser, otherwise the oil separates and floats on the surface.

In cold process soap, Mandarin & Chilli behaved without complications in the soap maker’s practical test: it did not accelerate trace, the mixture did not thicken and there was no need to work faster than usual. It also did not discolour the soap, so the fragrance does not interfere with the planned colour of the soap. It is added in the usual way at a light trace, leaving time for layering or swirl designs.

The fragrance oil can also be used in all types of candles, including container candles and tea lights. The amount is governed by the IFRA category 12 limit. Before a larger batch, it is worth pouring a test candle and checking the intensity of the fragrance both cold and while burning.


Suitable for products such as

  • Bar soaps – IFRA category 9, including cold process soap.
  • Shower gels, liquid soaps and shampoos – rinse-off products, where a more pronounced citrus and spicy fragrance comes through during washing.
  • Body creams, lotions, butters and oils – the fragrance oil is worked into a cooled emulsion or into the oil component of an anhydrous product.
  • Perfumes and solid perfumes – alcohol solubility allows the preparation of alcohol-based perfumes, while oil solubility allows solid perfumes in a wax base.
  • Container candles and tea lights – amount according to IFRA category 12.
  • Air fresheners and home fragrances – in a water-based spray with a solubiliser, or directly in an oil base.

Good to know

The fragrance oil has a yellow colour. In white creams or light balms, check any effect on colour at your usage rate, especially if you are close to the upper limit.

The product is subject to classification under the CLP Regulation and contains substances classified as hazardous. Among the ingredients is lime oil (Citrus aurantifolia (Lime) oil), which is listed as a CMR ingredient. Details on composition, classification and safe handling are in the safety data sheet.


Frequently asked questions

Is Mandarin & Chilli fragrance oil suitable for cold process soap?
Yes, in a practical test in cold process soap, Mandarin & Chilli behaved without complications. The fragrance did not accelerate trace, the mixture did not thicken and it did not discolour the soap. It can therefore also be used in techniques that need the mixture to stay fluid for longer, such as layering or swirl designs. The amount is governed by the IFRA limit for category 9.
How much Mandarin & Chilli fragrance oil should I add to a cream or soap?
There is no single recommended usage rate, as the upper limit depends on the IFRA category the product belongs to. A body cream falls into category 5A and a bar soap into category 9, and each has its own maximum permitted proportion. The specific limits are in the IFRA certificate in the Product documentation section. Test the intensity of the fragrance within the limit on a small batch.
Is Mandarin & Chilli fragrance oil soluble in water?
No, Mandarin & Chilli fragrance oil does not dissolve in water. It dissolves in oil and in alcohol. For toners, hydrosol sprays or water-based air fresheners, you need a solubiliser to disperse the oil, otherwise the fragrance floats to the surface. In oil-based and alcohol-based products, it mixes in directly.
Can Mandarin & Chilli fragrance oil be used in candles?
Yes, Mandarin & Chilli fragrance oil is also intended for all types of candles, including container candles and tea lights (IFRA category 12). The amount is determined by the limit for this category. Before producing a larger batch, we recommend a test candle, on which you can check the burn and the intensity of the fragrance both cold and while burning.
When is Mandarin & Chilli fragrance oil added to an emulsion?
Mandarin & Chilli fragrance oil is added to a cream or lotion in the cooling phase, that is, only after the finished emulsion has cooled, while stirring continuously. It is not added to the hot oil phase before emulsification. It can also be worked into the finished base afterwards, provided it is mixed in thoroughly and you check that the emulsion has remained stable.
What is the difference between Mandarin & Chilli fragrance oil and an essential oil?
Mandarin & Chilli fragrance oil is a fragrance composition made up of several fragrance ingredients of mixed origin. An essential oil is a distillate or an expressed oil from a single plant. A fragrance composition makes it possible to combine scents that cannot be obtained from a single plant, such as mandarin and chilli, and its use is governed by the IFRA limits stated in the product certificate.

Parameters

INCI
Parfum
Product colour
Yellow
Country of origin
France
Processing method
Blending
Free from
parabens
Function in formulation
Fragrance component
Application type
Leave-onRinse-off
Volume
1000 ml

Product documentation

CoACertificate of Analysis
batch 2048858198PDF ↓
TDSTechnical Data Sheet
Physical parameters and processingPDF ↓
IFRAIFRA Certificate
batch 2048858198PDF ↓
AllergensAllergen Declaration
batch 2048858198PDF ↓
SDSSafety Data Sheet
Available for purchased products —
Download all (ZIP)

4 PDF files in one archive

Silvia O.9 Nov 2026SK

Verified purchase