Amber Glass Bottle, Gold White Dropper, 50 ml

Yes, the packaging can be used repeatedly if hygiene rules are observed. However, before each new filling, it is necessary to thoroughly clean and disinfect both the bottle and the dropper in order to minimize the risk of microbial contamination of the product. For disinfection we recommend using technical alcohol, for example isopropyl alcohol or ethanol, available in our range: IPA 99 % isopropyl alkohol or Etanol 96 % denaturovaný rastlinný. After disinfection, let all parts dry completely at room temperature and only then refill them.

The dropper is most suitable for thin to medium-viscosity liquids where precise drop-by-drop application is important. These are mainly facial and body oils, serums, concentrates with active ingredients, aromatherapy blends and various extracts. With very thick oils or gels, dosing may be less smooth, so it is advisable to test the behavior of the specific formulation in this type of packaging in advance.

First, rinse the bottle and the individual parts of the dropper mechanically with a suitable detergent and warm water, avoiding aggressive cleaning agents that could damage the seals. Then rinse the components thoroughly with clean water so that no detergent residues remain. After washing, we recommend disinfecting the internal surfaces with alcohol, for example using the products IPA 99 % isopropyl alkohol or Etanol 96 % denaturovaný rastlinný. After disinfection, let all parts dry freely on a clean surface and only then refill the bottle.

If you decide not to reuse the packaging, it is advisable to recycle it according to the material composition given in the product parameters. After rinsing and removing product residues, separate the glass part of the bottle from the dropper and place it in the container intended for glass sorting according to local rules. The dropper consists of several materials (plastic, rubber, possibly metal), therefore it is advisable to follow the material marking in the parameter table and sort the individual parts according to local recommendations for plastic and other components. Before disposal, make sure that no residues of hazardous or special substances remain in the packaging which may be subject to special collection.

The simplest way to select suitable packaging is to use the advanced filter in the packaging material categories. After clicking on a specific category (for example bottles, medicine bottles or cosmetic packaging), you will find a filter at the top of the page where you can set your requirements in detail. Products can be sorted according to the type and size of the neck, total volume or size, color and material. In this way you will quickly choose packaging that best matches your formulation and the intended method of use.

When filling the bottle, we recommend working in a clean environment, using suitable funnels or filling tools and taking care that no impurities enter the packaging. Before first use and with each repeated filling, it is important to clean and disinfect the packaging, ideally using alcohol such as IPA 99 % isopropyl alkohol or Etanol 96 % denaturovaný rastlinný. After filling, close the packaging well with the dropper, store it at a stable room temperature, away from direct sunlight and heat sources. In this way you support the stability of the formulation and preservation of product quality throughout its entire shelf life.