GLASS BOTTLES up to 10 ml
Gloss Black Glass Bottle, Glossy Silver White Spray, 10 ml
Pack size10 ml15 ml30 ml50 ml100 ml
This black glossy glass bottle with a 10 ml volume and a white and silver fine mist sprayer is designed for small volumes of liquid cosmetic products that are applied by spraying. full description
Lowest price in the last 30 days: €1.20
Total for 1 pcs: €1.20
Quantities add up across all combinations of this bottle.
Product description
This black glossy glass bottle with a 10 ml volume and a white and silver fine mist sprayer is designed for small volumes of liquid cosmetic products that are applied by spraying. The opaque black glass protects the contents from light, so it is particularly suitable for perfumes, fragrance waters, hydrosols and facial toners, which lose their scent or effectiveness when exposed to daylight for longer periods. The small volume works well for samples, travel packs or test batches of your own fragrances.
The set as a whole is declared as suitable for contact with cosmetics. The glass bottle on its own has a certificate for direct contact with food. The sprayer does not have one, so the set is intended for cosmetic use.
What it is suitable for
- Perfumes and fragrance waters – alcohol-based compositions are dispensed evenly by the sprayer, and the black glass protects the fragrance from light, which changes it over time.
- Hydrosols and toners – water-based products have a low viscosity and are sprayed as a fine mist, which suits refreshing sprays for the face and hair.
- Samples and travel packs – a volume of 10 ml is enough to try out a fragrance or toner, or for a supply for a few days, and it is easier to pack for trips than a larger bottle.
Filling and volume
The nominal volume is the amount the bottle is designed for in normal filling. The brimful volume, stated in the parameters, is the physical volume up to the neck. The difference provides a reserve for the dip tube and the body of the sprayer, which take up part of the inner space once screwed on, and for the expansion of the contents when the temperature changes. For this reason, fill the bottle only up to the nominal volume. If it is overfilled, the contents are pushed out through the thread when the sprayer is screwed on.
You cannot see the liquid level through black glass, so measure out the volume in advance when filling, for example with a syringe or a small measuring cup. The dip tube of the sprayer is longer than the bottle. Cut it at an angle so that it reaches just above the bottom. The angled cut prevents it from sticking to the glass.
One press of the sprayer releases a small amount of liquid; the exact output is stated in the parameters. Before first use, press it several times until the tube fills and the spray starts to come out evenly.
Good to know
The sprayer is designed for water-based and alcohol-based liquids. Thicker products, oils or gels will either not be sprayed at all, or the nozzle will release a stream instead of a mist. For your own formulation, especially one with a higher proportion of essential oils or other solvents, we recommend checking the behaviour of the plastic parts and the tightness on a single sample before you fill the whole batch.
Before the first filling, wash the bottle, disinfect it with isopropyl alcohol or ethanol and leave it to dry completely. Residual water in the bottle would dilute the contents and may cause cloudiness in alcohol-based perfumes. The bottle can be reused. After emptying, simply rinse it and disinfect it again. To rinse the sprayer, spray clean alcohol or water through it several times.
Glass does not tolerate sudden temperature changes. Do not heat the bottle or fill it with hot contents, as it may crack. Products should be filled once they have cooled to room temperature.
Closures with the same neck type as stated in the parameters, and other ready-made combinations of a bottle with a closure, can be found in the Handymade range. If you combine them yourself, we recommend checking the tightness, the dispensing and the behaviour of the packaging with your specific formulation.
After use, the glass bottle belongs in glass recycling. Unscrew the sprayer and sort it separately.
Frequently asked questions
Parameters
Glass bottle, black glossy vial, 10 ml
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.





















































































