White Plastic Bottle, Silver White Spray, 50 ml

White plastic bottle with fine mist sprayer for toners, hydrolates and sprays

The set of a white 50 ml PET bottle and a glossy white and silver fine mist sprayer is designed for liquid cosmetic products that are applied by spraying. White opaque plastic lets less light through to the contents than clear plastic, so it is suitable for hydrolates, facial toners and aqueous solutions of active ingredients that lose stability in light. PET is lightweight and does not break when dropped. The bottle with sprayer is easy to carry in a handbag or travel bag and is also used when working with clients in a salon.

The colour of the sprayer matches the white bottle. Each press releases a small, consistent dose dispersed into a fine mist, which is useful for products applied over a larger area of skin or hair.

What the set is suitable for

• Facial toners and hydrolates – the sprayer applies a thin layer without the product touching your hands, and the white plastic also reduces light exposure.
• Hair sprays and leave-in hair waters – thin hair products spray comfortably onto the lengths.
• Refreshing body waters – a smaller pack for travel or for a trial batch.
• Alcohol-based sprays for hands and tools – provided that the formulation complies with the rules for the given type of product.
• Samples and test batches – 50 ml is enough to check the fragrance, stability or customer response before larger-scale production.

How to work with the set

The sprayer is designed for thin aqueous or alcohol-based liquids. It draws up thick emulsions, gels and pure vegetable oils poorly and produces a stream or drops instead of a mist. For an oil-based product, therefore, test a small sample first and only then fill the whole batch.

The bottle has a nominal volume of 50 ml, that is, the volume it is intended to hold during normal filling. The total volume up to the rim of the neck is larger. The difference serves as a reserve for the dip tube of the sprayer and for the expansion of the contents when the temperature changes. Fill to the nominal volume, not to the rim, otherwise part of the contents will be pushed out when the sprayer is fitted.

After tightening the sprayer, turn the bottle upside down and watch for a moment to see whether the contents leak. Tightness depends on the thread seating evenly, so do not overtighten.

Cleaning, compatibility and reuse

Before the first filling, wash the bottle and the sprayer, disinfect the inside with isopropyl alcohol or ethanol and let it dry completely. Residual water would dilute and spoil the contents, especially in preservative-free products.

The set as a whole is declared suitable for contact with cosmetic products. Only the bottle has a separate certificate for direct food contact. The sprayer does not have one, so the set is not intended for filling food products.

With prolonged contact with undiluted essential oils and some solvents, the plastic may soften or lose its appearance. For formulations with a high proportion of essential oils, check how the packaging behaves on one bottle over several weeks.

After thorough washing and disinfection, the bottle can be reused. Rinse the sprayer with clean water with a little ethanol and pump it dry several times to remove residues of the previous contents from the dip tube and nozzle. You can find closures with the same neck type and other ready-made combinations in the Handymade range. If you combine components yourself, check the tightness and dispensing with your specific formulation.

The bottle is made of PET and belongs in sorted plastic waste. The sprayer combines polypropylene with aluminium, so separate it from the bottle before disposal.

Frequently asked questions