+421 950 333 113info@handymade.store

Spend over €100 for discounted shipping!

GLASS BOTTLES 15 ml

Gloss Black Glass Bottle, Black Fine Mist Sprayer, Smoky Overcap, 15 ml

Pack size10 ml15 ml30 ml50 ml100 ml

The black glossy 15 ml glass bottle with a plastic fine mist sprayer and a smoky overcap is a complete set for cosmetic products applied by spraying. full description

AvailabilityIn stock · 181 pcs
Product codeO18SCL015-OVR18PC2
€0.72incl. VAT

Lowest price in the last 30 days: €0.72

Save €0.02 with this set

Volume pricing
1–99 pcs€0.72Your price
100–999 pcs€0.71−2 %
1000–4999 pcs€0.65−9 %
from 5000 pcs€0.59−18 %

Total for 1 pcs: €0.72

Quantities add up across all combinations of this bottle.

Add 99 more pcs and the price drops to €0.71/pc.

Product description

The black glossy 15 ml glass bottle with a plastic fine mist sprayer and a smoky overcap is a complete set for cosmetic products applied by spraying. The dark glass filters out light and so protects contents that lose their scent or colour on exposure, for example perfumed waters, toners with plant extracts or hydrosols. The small volume suits samples, travel packs and pocket sprays.

The bottle has the shape of a medicine bottle with a smooth, glossy surface. The sprayer is made of polypropylene, and the smoky overcap is dark and translucent, so it looks uniform on the black glass. The set is declared suitable for contact with cosmetic products. The certificate for direct food contact applies only to the glass bottle on its own; the set as a whole is intended for cosmetics.


Suitable uses

  • Perfumed waters and alcohol-based sprays – the sprayer disperses the contents into a fine mist, and the dark glass filters out light, as light is not good for fragrance compositions.
  • Facial toners and hydrosols – thin water-based products pass through the sprayer without problems, and 15 ml is enough for a customer sample.
  • Hair and body mists – light water-based or water-alcohol blends that are applied over a larger area.
  • Samples and testers – the small volume and opaque packaging suit trial versions of formulations before a larger batch is made.

Filling and dispensing

The bottle is filled to the nominal volume, not to the brim. The nominal volume is the amount the packaging is designed for under normal filling. The total brimful volume is the physical volume up to the neck, and you will find it in the product parameters. The difference between the two values is a reserve for the sprayer tube, which pushes part of the contents upwards when the sprayer is screwed on, and for the expansion of the contents with changes in temperature.

With black glass, the level of the contents cannot be seen from the outside. Measure the contents beforehand with a measuring cup or a syringe, and fill slowly through the narrow neck so that the contents do not get onto the thread.

One press of the sprayer releases approximately 0.12 ml, so a full bottle lasts for about 120 doses. When using it for the first time, prime the sprayer by pressing it several times until the tube fills and the mist becomes even.


Good to know

Before the first filling, wash the bottle and the sprayer, disinfect them with isopropyl alcohol or ethanol and let them dry completely. Residual water in the tube would dilute the first doses and could cause cloudiness in anhydrous alcohol-based products.

The sprayer works with thin liquids. Water-based and alcohol-based solutions, hydrosols and very light oil blends pass through the nozzle without difficulty. Thicker products, emulsions or solutions with a thickener either cannot be sprayed or the nozzle produces a jet instead of a mist. For products with a higher proportion of essential oils or solvents, we recommend checking the behaviour of the plastic parts of the sprayer with your specific formulation, especially whether it still seals properly after several weeks.

The sprayer tube is longer than the height of the bottle, so it is shortened with sharp scissors using a diagonal cut so that it ends just above the bottom. The diagonal cut prevents the tube from sticking to the bottom and the sprayer from drawing in air.

Do not fill the bottle with hot contents. Let the product cool to room temperature before filling, as sudden changes in temperature may damage the glass.

The set can be used repeatedly. After the bottle is emptied, it is washed, and the sprayer is rinsed with warm water and then with ethanol by spraying it several times. Strong scents of perfumed waters may not be removed from the plastic parts completely, so a new sprayer is recommended when you change the scent. Glass belongs in glass recycling, the sprayer in plastics.

Closures with the same neck finish as stated in the parameters, and other ready-made combinations of packaging with a closure, can be found in the Handymade range. If you make your own combination, we recommend checking the seal, dispensing and behaviour of the packaging with your specific formulation.


Frequently asked questions

Does the black glass bottle protect the contents from light?
Yes, the black opaque glass filters out light and protects the contents from its effects. It is therefore suitable for perfumed waters, toners with plant extracts and other products whose scent or colour changes in light. Bear in mind that the amount of contents cannot be seen from the outside, so measure it beforehand when filling.
How much does the 15 ml bottle with a sprayer hold?
The bottle is filled to the nominal volume of 15 ml. The physical volume up to the brim is larger and you will find it in the parameters, but this reserve is for the sprayer tube and the expansion of the contents. If the bottle is filled up to the neck, the contents will overflow through the thread when the sprayer is screwed in and the closure will not seal.
Can oil be used in this sprayer?
The sprayer usually copes with very light oils and oil blends, but not with thicker oils or blends with butters. The nozzle is designed for thin water-based and alcohol-based liquids. For oil-based contents, we recommend testing a small amount and watching whether it produces a mist or only a jet. Oil also clogs the nozzle faster, so ethanol should be sprayed through the sprayer after use.
Is the set with a sprayer suitable for contact with food?
No, the set as a whole is intended for cosmetics and is declared suitable for contact with cosmetic products. The certificate for direct food contact applies only to the glass bottle on its own; the plastic sprayer does not have such a certificate. When choosing packaging for food, always verify the suitability of the whole combination.
How do I clean the 15 ml glass bottle with a sprayer before reuse?
Wash the bottle with warm water and washing-up liquid, rinse it with ethanol or isopropyl alcohol and let it dry upside down. Rinse the sprayer by placing it in clean water and spraying several times, then do the same with ethanol. When changing the perfumed water, bear in mind that the plastic may retain some of the original scent.
Why does the sprayer not spray when used for the first time?
The sprayer needs to be primed with several presses until the tube draws the contents up to the nozzle. If no mist is produced even after ten presses, check that the tube reaches the bottom and that the sprayer is screwed on firmly. A loose thread draws in air instead of liquid. With thicker contents, the cause may also be the viscosity of the product.

Parameters

Glass bottle, black glossy vial, 15 ml

Product colour
Black
Country of origin
China
Nominal capacity
15
Brimful capacity
18 ml
Diameter
28,5 mm
Thread type
18/410
Height
63,8 mm
Product material
Glass

Plastic Fine Mist Sprayer, Smoke Cap, 18/415

Product colour
Black
Country of origin
China
Diameter
22,3 mm
Thread type
18/415
Height
40 mm
Tube length
115 mm
Dose
0,12 ml

Product documentation

PPWRPackaging Declaration (PPWR)
Glass bottle, black glossy vial, 15 ml · O18SCL015PDF ↓
Plastic Fine Mist Sprayer, Smoke Cap, 18/415 · OVR18PC2PDF ↓
PDSProduct Data Sheet
Glass bottle, black glossy vial, 15 ml · O18SCL015PDF ↓
Plastic Fine Mist Sprayer, Smoke Cap, 18/415 · OVR18PC2PDF ↓
DrawingTechnical drawing
Glass bottle, black glossy vial, 15 ml · O18SCL015PDF ↓
Plastic Fine Mist Sprayer, Smoke Cap, 18/415 · OVR18PC2PDF ↓
Download all (ZIP)

6 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.