Follow the discounted products!
Nakúp ešte za 23,50€a dopravu máš zadarmo
Would you like to create account?
The glass bottle with straight lines and a slightly matte silver spray ring represents an elegant and professional packaging for liquid products where precise a... read more
1,35 € incl. VAT
The glass bottle with straight lines and a slightly matte silver spray ring represents an elegant and professional packaging for liquid products where precise and hygienic application by means of fine spraying is important. Thanks to the durable glass and high-quality spray mechanism, the bottle is suitable for filling cosmetic preparations, treatment solutions and concentrated blends, for which you will appreciate even dosing onto the skin or surface.
The packaging provides a stable environment for the contents and minimizes the product’s contact with air during application, which makes it suitable for formulations sensitive to external influences. The practical sprayer enables comfortable, economical and controlled use, whether for home cosmetics, small batches of artisan products or for professional use in salons.
This glass bottle with sprayer forms a functional set in which the packaging and dosing component are already matched. Combinations of packaging and closures that are created directly on Handymade are tested and functional. However, for all combinations we always recommend performing your own compatibility test – verify the sealing, smoothness of dosing, fineness of the spray and the behaviour of the packaging in contact with the specific formulation (viscosity, alcohol content, oil phase, etc.). In this way you will ensure reliable and long-term stable use of your final product.
All technical parameters of the packaging are given in the attached Packaging Quality Certificate and in the product parameters.
Yes, the bottle and the sprayer can be used repeatedly if hygienic principles are observed. Before each new filling, we recommend thoroughly cleaning the packaging and then disinfecting it with a suitable alcohol-based preparation, for example IPA 99% isopropyl alcohol or ethanol 96% denatured plant-based. Disinfection helps to minimize the risk of microbial contamination and prolongs the stability of your formulations.
We recommend first rinsing the bottle with a suitable cleaning solution or mild detergent, then thoroughly rinsing with water and allowing it to dry completely. The sprayer should be rinsed with warm water, or water with a small amount of detergent, and finally briefly sprayed through with clear alcohol. After mechanical cleaning, disinfect both parts with an alcohol-based preparation (e.g. IPA or ethanol) and leave them to air dry to remove residue of impurities and micro-organisms.
The sprayer is ideal for liquid products with low to medium viscosity that are intended to be applied as a fine mist or spray. In practice, this means mainly facial and body toners, refreshing sprays, floral waters, aromatherapeutic blends, hair sprays or light cleaning solutions. For thicker emulsions or oil blends, we always recommend testing whether the sprayer dispenses the contents smoothly and without clogging.
You can support the stability of the contents by combining several steps: selecting an appropriate type of preservation according to the composition of the product, filling into clean and disinfected packaging, minimizing the product’s contact with air and storing it under the recommended conditions (cooler and dry environment, without direct sunlight). Regular monitoring of the smell, colour and texture of the formulation is also important, especially for natural cosmetics with a higher proportion of hydrolates or active substances sensitive to oxidation.
When selecting suitable packaging, we recommend using the extended filter in the packaging material categories. After clicking on the relevant category, you will find the filter at the top of the page, where you can narrow down the offer according to parameters such as neck type, size, colour or material. Thanks to this, you will easily find bottles, vials, jars or pots that match your formulation and design expectations, and at the same time you can check compatible closures or dispensers.
If you decide not to reuse the bottle with sprayer, we recommend recycling it responsibly according to the material types specified in the product parameters. In most cases, the glass part of the packaging can be handed over to separated glass collection after emptying and basic rinsing. The plastic and metal parts of the sprayer (top part, tube, spring) should be separated according to local waste sorting rules or disposed of in mixed waste if it is not possible to separate them. Always follow the recommendations given in the parameter table for the specific product and the local recycling guidelines in your municipality or city.
