Plastic bottle, amber, white mini trigger sprayer, 150 ml

The packaging can be used repeatedly if basic hygiene principles are followed and it is handled appropriately. Before each new filling, the bottle and the sprayer must be thoroughly cleaned and disinfected, for example by using isopropyl alcohol or ethanol (e.g. products available in the disinfection category on Handymade). This minimises the risk of microbial contamination and affecting the stability of your formulation.

Before repeated filling, we recommend first rinsing the bottle with a suitable cleaning solution or with warm water and surfactant, and then drying it thoroughly. It is then appropriate to disinfect the inner surface and the parts that come into contact with the product using an alcohol-based preparation. High-percentage alcohol solutions intended for technical and cosmetic use are, for example, practical for this purpose. Disinfection before each filling helps maintain the quality and hygienic safety of the product throughout the entire period of use.

Always store the filled bottle well closed, in a dry and clean environment, away from direct sunlight and sources of heat. Storage at a stable room temperature is recommended, unless your composition requires a different regime. Avoid long-term exposure to significant temperature fluctuations or mechanical pressure so as not to affect the properties of the packaging or its contents. When storing more aggressive blends, it is advisable to carry out a material compatibility and long-term stability test in advance.

If you decide not to reuse the packaging, we recommend recycling it according to the recommendations given in the parameters of the specific product on the Handymade website. Before handing it over to sorted waste, it is advisable to empty the bottle and remove any remaining contents as far as possible. Then proceed according to the material marking on the packaging: place the plastic body and components in an appropriate way into the relevant container for sorted waste in accordance with local rules. In this way you will reduce the amount of municipal waste and support the reuse of the material in the recycling process.

To select suitable packaging, you can use the advanced filter, which is available at the top of the page after clicking on the relevant category of packaging materials. In the filter you can clearly set parameters such as neck type, packaging size, colour and material, and thus display only products that meet your requirements. We also recommend clicking through the related categories (for example bottles, sprayers, pumps or jars), so that you can compare different packaging solutions and choose the optimal combination for your specific formulation.