Yes, the glass bottle with dispenser is very suitable for packaging facial serums, light emulsions and other liquid cosmetic products where precise and hygienic dosing is important. Glass is a stable material which, in standard cosmetic formulations, ensures good compatibility and helps maintain the quality of the contents during use. However, we always recommend carrying out your own compatibility test with the specific formula.

The packaging can, if hygiene rules are followed, be used repeatedly for new batches of products. Before each new filling, the bottle and dispenser must be thoroughly cleaned and then disinfected with a suitable alcohol-based preparation, for example with the products IPA 99 % isopropyl alcohol or Ethanol 96 % denatured plant-based. Thorough disinfection minimizes the risk of microbial contamination and helps maintain the stability of the final product.

Before filling, we recommend cleaning, drying and disinfecting the packaging. Fill the product into the bottle slowly to minimize the formation of bubbles and deposits on the walls. Do not fill the bottle all the way to the rim – leave a small air gap so that the dispenser can draw up the contents properly. After screwing on the dispenser, check the sealing and perform several test pumps to verify the smoothness and dose per pump.

After the contents have been used up, it is advisable first to remove product residues mechanically by rinsing with warm water and a mild cleaning agent, then to rinse thoroughly with clean water and allow to dry completely. Before refilling, we recommend disinfecting both the packaging and the dispenser with an alcohol solution, for example using the products IPA 99 % isopropyl alcohol or Ethanol 96 % denatured plant-based. Allow the disinfectant solution to act briefly and let the excess evaporate so that the packaging remains clean and ready for refilling.

If you decide not to reuse the packaging, we recommend disposing of it in accordance with local waste-sorting rules, which are based on the material specified in the product parameters. The glass body of the bottle, once cleaned, usually belongs in the glass container. Plastic or composite parts of the dispenser should be separated from the bottle body and placed in mixed or plastic waste according to local regulations. Before disposal, we recommend removing product residues to facilitate the recycling process.

To select suitable packaging, you can use the advanced filter located at the top of the page after clicking on a specific packaging category. Using the filter, you can conveniently narrow down the offer according to neck type, size, colour and packaging material. In this way, you will quickly find a bottle, pill bottle or jar that best matches the properties of your product and the desired visual style.