+421 950 333 113info@handymade.storeHandymade Days: −10 % on all ready-made productsShop now

GLASS BOTTLES 15 ml

White Glass Bottle, White Safety Cap & Dropper, 15 ml

Pack size10 ml15 ml30 ml100 ml

The white glass medicine bottle with a dropper insert and a cap with an 18/410 neck finish is used for dispensing small amounts of liquid preparations drop by drop. full description

AvailabilityIn stock · 183 pcs
Product codeO18SB015-OVV18PB4
€1.58incl. VAT

Lowest price in the last 30 days: €1.58

Volume pricing
1–279 pcs€1.58Your price
280–1119 pcs€1.48−6 % · 1× plato
1120–5039 pcs€1.40−12 % · 4× plato
from 5040 pcs€1.27−19 % · 18× plato

Total for 1 pcs: €1.58

Quantities add up across all combinations of this bottle.

Product description

The white glass medicine bottle with a dropper insert and a cap with an 18/410 neck finish is used for dispensing small amounts of liquid preparations drop by drop. The 15 ml volume suits essential oils and their blends, facial serums, oil serums for nails and cuticles, tinctures or samples of your own formulations, where only a few drops are used at a time. Opaque white glass does not let light through, which slows down changes in the fragrance and colour of light-sensitive preparations. The whole set is declared suitable for contact with cosmetics.


How the set works

The dropper insert is pushed straight into the neck of the bottle and stays in it permanently. After the cap is opened, the bottle is tilted or turned upside down and the preparation flows out drop by drop, without measuring and without the contents touching your fingers or skin. The cap is screwed on over the dropper insert and closes the bottle.

  • Controlled dispensing – the dropper insert restricts the flow, so it is easier to keep to an exact number of drops when dosing essential oils into a diffuser, a bath or a formulation.
  • Protection from light – white glass does not let light through, which benefits essential oils, oils with a high proportion of unsaturated fatty acids and serums with light-sensitive active ingredients.
  • The contents stay hidden – opaque glass does not show the colour or level of the preparation. With small volumes this usually does not matter, but if you need to monitor the remaining amount, clear glass is more suitable.
  • Glass with no odour carry-over – glass does not absorb fragrance, so after cleaning it can be used for another preparation without transferring the previous fragrance.

What it is suitable for

It is most often used for essential oils and fragrance blends that are dispensed drop by drop. It is equally suitable for facial serums with an oil or water base, oil serums for nails, herbal tinctures and alcohol-based extracts, where only a small amount is used each day. When making your own cosmetics, 15 ml is also a suitable volume for samples and test batches that you want to keep aside or give to others to try.

Thick oils, such as castor oil, or more viscous serums drip more slowly through a short dropper insert. For such preparations, we recommend testing the dispensing with the finished formulation before filling a whole batch.


Nominal and total volume

The nominal volume is the amount the bottle is designed to hold when filled normally. The brimful capacity is the physical volume up to the neck and can be found in the parameters. The difference between them forms a reserve for the dropper insert, which is pushed into the neck after filling, and for the expansion of the contents when the temperature changes. Fill the bottle to the nominal volume, not to the brim. If the bottle is overfilled, the dropper insert pushes part of the contents out when it is inserted and contaminates the thread.

Fit the dropper insert only after filling and press it evenly into the neck until it is fully seated. A crooked dropper insert does not seal as well, and when the bottle is turned upside down the contents may leak along its edge.


Good to know

Before the first filling, wash the bottle, the dropper insert and the cap, disinfect them with isopropyl alcohol or ethanol and let them dry completely. Residual water in the neck or in the dropper insert would get into an anhydrous preparation. The same procedure applies when reusing the bottle; the dropper insert can be carefully prised out of the neck and cleaned separately.

The dropper insert is made of polypropylene, the cap of polypropylene and polyethylene. With concentrated essential oils, especially citrus ones, and with preparations containing a high proportion of solvents, check how the plastic parts behave with your specific formulation, especially during longer storage. The glass itself is resistant to these substances.

The set is not declared for contact with food; it is intended for cosmetic preparations. Store it in a dry and clean environment.

Closures with the same 18/410 neck finish and other ready-made bottle + closure combinations can be found in the Handymade range. For your own combination, we recommend checking the seal, the dispensing and the behaviour of the packaging with your specific formulation. At the end of its life, the glass is sorted as glass and the plastic parts as plastic; it is enough to separate them before recycling.


Frequently asked questions

Is the white 15 ml medicine bottle with a dropper insert suitable for essential oils?
Yes, drop-by-drop dispensing and protection from light are the main reasons why this set is used for essential oils. The glass bottle is resistant to essential oils. The dropper insert and the cap are made of plastic, so with concentrated oils, especially citrus ones, we recommend checking how the plastic parts behave with the specific oil during longer storage.
How much can actually be filled into the 15 ml medicine bottle?
It is filled to the nominal volume of 15 ml. The bottle has a larger physical volume up to the brim, and this difference is a reserve for the dropper insert pushed into the neck and for the expansion of the contents when the temperature changes. If it is filled to the brim, the dropper insert pushes part of the preparation out when it is inserted and contaminates the thread, so the cap then does not seal as well.
Can the glass medicine bottle with a dropper insert be reused?
Yes, glass does not absorb fragrance or colour, so after washing and disinfection it can be filled with another preparation. The dropper insert can be carefully prised out of the neck and cleaned separately, but after frequent removal it may not seal as well, and in that case it is better to replace it. Let all parts dry completely before the next filling.
Is the white medicine bottle also suitable for water-based and alcohol-based preparations?
Yes, glass is resistant to water and ethanol, so it can be filled with toners, hydrosols in a small volume or tinctures. Water-based preparations without preservatives have a short shelf life regardless of the packaging, so it makes sense to fill them only in small volumes. With alcohol-based extracts, we recommend checking that the plastic dropper insert and cap do not change over the long term at the given ethanol content.
Which closure fits a medicine bottle with an 18/410 neck finish?
Closures with an 18/410 neck finish can be used on the bottle, that is, caps, droppers or fine mist sprayers with the same type of neck. The set is supplied with a white cap and a short dropper insert. For any other combination from the Handymade range, we recommend checking the seal and the dispensing with the specific preparation, because the behaviour of the closure also depends on the viscosity of the contents.

Parameters

Glass bottle, vial, white, 15 ml

Product colour
White
Country of origin
China
Nominal capacity
15
Brimful capacity
19 ml
Diameter
29 mm
Thread type
18/410
Height
63 mm
Product material
Glass

Plastic dropper for glass vials, 18 mm, short

Product colour
Clear
Country of origin
China
Diameter
14,5 mm
Thread type
18/410
Height
17,5 mm
Product material
PPPlastic

White Plastic Tamper Evident Safety Cap, 18/410

Product colour
White
Country of origin
China
Diameter
23,9 mm
Thread type
18/410
Height
23 mm
Product material
PPHDPEPlasticLDPE

Product documentation

PPWRPackaging Declaration (PPWR)
Glass bottle, vial, white, 15 ml · O18SB015PDF ↓
Plastic dropper for glass vials, 18 mm, short · OVV18KKPDF ↓
PDSProduct Data Sheet
Glass bottle, vial, white, 15 ml · O18SB015PDF ↓
Plastic dropper for glass vials, 18 mm, short · OVV18KKPDF ↓
White Plastic Tamper Evident Safety Cap, 18/410 · OVV18PB4PDF ↓
DrawingTechnical drawing
Glass bottle, vial, white, 15 ml · O18SB015PDF ↓
White Plastic Tamper Evident Safety Cap, 18/410 · OVV18PB4PDF ↓
Download all (ZIP)

7 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.