GLASS BOTTLES up to 10 ml
White Glass Bottle, White Safety Cap & Dropper, 10 ml
Pack size10 ml15 ml30 ml100 ml
The white glass bottle with a white cap and dropper insert is a ready-made set for 10 ml of liquid contents, dispensed drop by drop. full description
Lowest price in the last 30 days: €1.35
Total for 1 pcs: €1.35
Quantities add up across all combinations of this bottle.
Product description
The white glass bottle with a white cap and dropper insert is a ready-made set for 10 ml of liquid contents, dispensed drop by drop. The opaque white glass limits the amount of light reaching the contents, so it suits essential oil blends, face and nail oils, perfume oils, serums or concentrated active ingredients that are added to formulations in small amounts. The small volume makes it practical for packing samples, test batches or more expensive raw materials, so that opened contents do not take long to use up.
The set is declared suitable for contact with cosmetic products. The components do not have a food-contact certificate.
How the set works
The bottle has the shape of a medicine bottle with an 18/410 neck finish. A short plastic dropper insert is pressed into the neck, narrowing the opening and releasing the contents one drop at a time when the bottle is tilted. If the open bottle is knocked over, the dropper insert slows the leakage considerably. The smooth white cap screws onto the thread and closes the bottle.
- Drop-by-drop dispensing – useful for raw materials where drops are counted into a formulation, for example essential oils or concentrates.
- Contents protected from light – opaque glass is an advantage for oils prone to oxidation and for fragrance blends.
- No finger contact with the contents – a dose is taken without dipping a stick or spoon, so the contents are less likely to be contaminated.
- Glass and plastic separate – the dropper insert and the cap can be removed from the bottle, which makes cleaning and waste sorting easier.
What it is suitable for
It works best with thin to medium-thick liquids: essential oils and their blends, light vegetable oils, oil serums for skin, hair and nails, perfume oils, alcohol tinctures or concentrates of active ingredients for adding to creams and serums. Thick oils and viscous serums pass through the dropper insert slowly. For these, a bottle with a wider neck or a pump is more suitable.
For finished products for sale, it serves as packaging for samples and travel sizes. In small-scale production, it is useful for storing your own fragrance compositions or pre-mixed essential oil blends, which are then dosed into soap, candles or emulsions.
Nominal and total volume
The nominal volume of 10 ml is the amount the bottle is designed for in normal filling. The brimful volume given in the parameters is the physical volume up to the top of the neck. The difference between them leaves room for the dropper insert, which takes up part of the space in the neck once pressed in, and for the expansion of the contents when the temperature changes. For this reason, fill only to the nominal volume. An overfilled bottle overflows when the dropper insert is pressed in, the contents contaminate the thread and the closure may then fail to seal.
Press the dropper insert into the neck only after filling the bottle, evenly around the whole circumference, until it sits on the rim of the neck. Then screw on the cap and turn the set upside down over a paper towel to check that it is tight.
Good to know
Before the first filling, all three parts should be washed, disinfected with isopropyl alcohol or ethanol and left to dry completely. Moisture in the bottle is undesirable with oil-based contents, and with water-based ones it means a risk of microbial contamination.
Glass tolerates heat, plastic parts do not. The bottle should not be filled with hot contents while the dropper insert is in the neck, and sudden temperature changes are not good for glass. With pure essential oils and strong solvents, we recommend checking how the dropper insert and the cap behave with the specific contents over a longer period, for example whether they soften or discolour.
After washing, the bottle can be reused. A dropper insert that has been removed may no longer sit as firmly in the neck, so we recommend a new one for the next filling. Fragrance blends cannot be washed out of plastic completely, so for a different fragrance it is better to replace both the dropper insert and the cap.
The set is not intended for contact with food. Use it only for cosmetic products and raw materials.
Closures with the same neck type and other ready-made combinations of a bottle with a closure can be found in the Handymade range. If you make your own combination, we recommend checking the tightness and dispensing with your specific formulation.
Frequently asked questions
Parameters
Glass bottle, vial, white, 10 ml
Plastic dropper for glass vials, 18 mm, short
White Plastic Tamper Evident Safety Cap, 18/410
Product documentation
- PPWRPackaging Declaration (PPWR)
- PDF ↓
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.















































































