Clear Frosted Glass Bottle, White Safety Cap & Dropper, 50 ml

Yes, the glass bottle is suitable for various types of liquid cosmetic products, such as serums, tonics, facial solutions or special active blends. Thanks to the stable glass and high-quality closure with safety lock, it is possible to safely fill products with a higher content of active substances. Before final use, we always recommend testing the behaviour of the specific formulation in the packaging under the planned conditions of storage and use.

The glass packaging can be reused provided that hygiene principles are observed. Before each new filling, the bottle must be thoroughly cleaned, rinsed and subsequently disinfected with a suitable alcohol solution, for example technical isopropyl alcohol or plant-based ethanol. For this purpose, you can use the products IPA 99 % isopropyl alcohol or Ethanol 96 % denatured plant-based. Only after the alcohol has completely dried and vented is the packaging ready for new filling.

First, mechanically clean the bottle from residues of the original product, then wash it with warm water and a suitable detergent and rinse thoroughly. After drying, we recommend spraying or rinsing the inner space and the thread with alcohol, for example with the products IPA 99 % isopropyl alcohol or Ethanol 96 % denatured plant-based. It is also advisable to apply disinfection to the closure and contact parts. Before reuse, let the packaging dry and ventilate thoroughly so that the new formulation is not diluted or affected.

If you decide not to use the bottle further, we recommend recycling it responsibly according to the material composition specified in the product parameters. The glass packaging is usually intended for sorting into the glass container, while plastic or combined closures may belong in the plastic container or mixed waste according to local rules. Before placing it in the collection container, empty the bottle, if necessary rinse out the residues of the contents, and if possible separate the glass part from the plastic cap to facilitate recycling.

To select a suitable bottle, vial or other packaging, you can use the advanced filter located at the top of the page after clicking on a specific packaging category. In the advanced filter you can set parameters such as neck type, size, colour or material and thus easily narrow the offer down to packaging that matches your formulation and visual concept. In this way, you will quickly find packaging compatible with selected closures, droppers or sprays according to your requirements.