Yes, the glass container can be reused if handled properly and if hygiene principles are observed. Before each new filling, we recommend thoroughly cleaning the bottle and the sprayer and then disinfecting them with a suitable alcohol solution, for example isopropyl alcohol or ethanol. For this purpose, you can use the products IPA 99 % isopropyl alcohol or Ethanol 96 % denatured plant-based. Only after complete drying and airing is the container ready for further safe use.

After the bottle has been emptied, it is advisable to rinse the sprayer with lukewarm water, or, if necessary, with a mild cleaning solution that is compatible with the raw materials used. We then recommend pressing the mechanism several times so that the internal channels are flushed and residues of the original product are removed. Disinfection can be ensured by short-term contact with a suitable alcohol solution followed by another rinse. It is important not to overload the sprayer with mixtures that are too thick or highly viscous, as these could clog the nozzle.

The bottle with sprayer is most suitable for thin to medium-liquid formulations that are intended to be applied in the form of a fine spray. These are mainly facial and body waters, refreshing and aromatic mists, hair treatment solutions, light styling products or home and textile sprays. For formulations containing oils or active substances, it is necessary to verify whether the final viscosity and composition will not affect the proper function of the sprayer.

When filling the glass bottle, it is advisable to work on a stable, clean and flat surface, to use a funnel or suitable filling aids, and to avoid strong impacts or over-tightening the closure. It is also recommended not to work over a hard floor without protective underlay. During storage, it is ideal to place the bottles vertically, in a dry and clean environment, away from direct sunlight and extreme temperatures. This extends the service life of the container as well as of the product inside.

If you decide not to use the container any longer, we recommend first emptying it and removing any remaining contents. The glass part of the bottle can then be placed in the appropriate glass container according to local waste sorting rules. The plastic components of the sprayer (cap, mechanism body, tube) should be separated and disposed of in the container intended for plastic waste, if the local collection system allows this. When sorting, it is always necessary to follow the material information given in the product parameters and the local recommendations for recycling.

You can simplify the selection of a suitable container by using the advanced filter in the packaging material categories. After clicking on the relevant category, a filtering option appears at the top of the page, where you can clearly choose parameters such as neck type, size, colour or packaging material. Thanks to the combination of these filters, you will quickly find bottles, vials, jars or pots that best match your formulation and the visual requirements of your brand.