GLASS BOTTLES 30 ml
Amber Matte Glass Bottle, Glossy Gold Black Pump with Smoky Overcap, 30 ml
The glass medicine bottle with pump solves two things that most serums and facial oils need: protection from light and measured dispensing without fingers touching the contents. full description
Lowest price in the last 30 days: €1.28
Total for 1 pcs: €1.28
Quantities add up across all combinations of this bottle.
Product description
The glass medicine bottle with pump solves two things that most serums and facial oils need: protection from light and measured dispensing without fingers touching the contents. Matte amber glass lets through less light than clear glass, which helps protect contents that are sensitive to oxidation, such as vegetable oils, vitamin serums or products containing essential oils. The 30 ml volume corresponds to a common pack size for a serum, facial oil or light fluid that lasts several weeks of use.
The pump in a glossy black and gold finish has a clear smoky overcap that protects the opening from dust while still letting you see whether the pump head is clean. The set suits products where the packaging should also give an impression of care.
What the set is suitable for
The pump draws the contents up through a dip tube from the bottom of the bottle, so it works best with liquid and slightly viscous products. Thick creams, butters or gels with high viscosity will not pass through it, or will be dispensed unevenly.
- Facial serums – water-based and oil-based serums are dispensed in small amounts, without unnecessary waste.
- Facial and body oils – dark glass slows the effect of light on unsaturated fatty acids, and the pump prevents spills.
- Light emulsions and fluids – liquid facial milks and fluids that can be drawn up through the tube.
- Hair and nail oils – small doses for hair ends or the cuticle.
- Liquid foundations and tinted fluids – dispensing by pressing makes it easier to measure the amount for a single use.
The amount the pump releases with one press is listed in the product parameters.
Nominal and total volume
The nominal volume of the bottle is the volume the packaging is intended for under normal filling. The total brimful volume is the physical volume up to the neck and is listed in the parameters. The difference between them leaves room for the tube and pump body, which extend into the bottle, and for possible expansion of the contents when the temperature changes. The bottle should therefore be filled to the nominal volume, not to the brim, otherwise the contents will overflow when the pump is screwed on.
The pump tube is supplied longer than the height of the bottle. Before fitting the pump for the first time, shorten the tube with sharp scissors so that it reaches just above the bottom. A tube that is too long will bend and the pump will draw poorly, while one that is too short leaves unused residue at the bottom.
Preparation and handling of the packaging
Before first filling, wash the bottle, disinfect it with isopropyl alcohol or ethanol and let it dry completely. Rinse the pump with alcohol by pressing it several times with the tube immersed in the alcohol, then let it pump empty and dry. Residual water in the tube could dilute an anhydrous product or introduce microorganisms into an unpreserved oil.
Fill more viscous serums into the bottle with a funnel or syringe. Press the pump several times before first use until the tube fills. The first presses usually release less product or only air.
Glass does not tolerate sudden temperature changes. Let a hot emulsion cool to at least room temperature before filling, which also protects the plastic parts of the pump.
The glass bottle has a declaration of suitability for contact with cosmetic products. No such declaration is available for the pump, so before placing the finished product on the market we recommend checking how the pump behaves with your specific formulation, especially with a higher proportion of essential oils, alcohol or solvents. The set is not intended for contact with food.
Good to know
A pump with a dip tube is not an airless system. Air enters the bottle after each press, so with sensitive oil serums it is worth allowing for antioxidant protection in the formulation. Dark glass protects against light but does not affect the access of air.
You can reuse the bottle. Once empty, wash it with warm water and detergent, disinfect it and let it dry. The pump is harder to clean. Rinsing with warm water and then alcohol works for oils and serums, while with emulsions residues may remain in the tube. When changing the type of product, it is more reliable to use a new pump.
You can also combine the bottle with other closures that have the same neck finish, as listed in the parameters. You can find ready-made packaging and closure combinations in the Handymade range. If you make your own combination, we recommend checking that it is leakproof.
Once empty, the glass bottle goes into glass recycling. The pump combines polypropylene and aluminium, so it is sorted separately from the glass.
Frequently asked questions
Parameters
Glass bottle, matte brown, 18 mm, 30 ml
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.




























































































