Amber Matte Glass Bottle, Gold White Spray, 30 ml

Amber glass medicine bottle, matte, white and gold fine mist sprayer, 30 ml

A set consisting of a matte amber glass medicine bottle with a volume of 30 ml and a plastic fine mist sprayer in a glossy white and gold finish is designed for liquid cosmetic products that are applied to the skin or hair as a fine mist. Amber glass filters light and helps protect contents that are sensitive to UV radiation, while the matte surface gives the bottle a uniform, non-glossy appearance. The sprayer dispenses a small amount per press, so it suits products where even and economical application matters.

The 30 ml volume suits hydrosols, facial mists, toners, make-up setting sprays, refreshing hair sprays and small test batches of perfumed waters. The whole set is declared suitable for contact with cosmetic products. It is not approved for contact with food, so it is not suitable for homemade oils, syrups or herbal infusions intended for consumption.

What the set is suitable for

• Hydrosols and facial mists – thin water-based products pass through the sprayer without problems, and the dark glass slows their degradation caused by light.
• Toners and essences – spray application covers the face evenly, without cotton pads and waste.
• Setting and refreshing sprays – a small dose per press suits products that are applied repeatedly throughout the day.
• Hair sprays and spray conditioners – for thin water-based or alcohol-based formulations. Test thicker emulsions first.
• Samples and travel packs – 30 ml is enough for trying out a new recipe or for packing into hand luggage.

Filling and volume

The nominal volume is the volume the packaging is designed for under normal filling. The brimful capacity is the physical volume of the bottle up to the neck. The difference between them is a reserve for the sprayer dip tube, for the air gap above the liquid and for expansion of the contents when the temperature changes. The bottle is filled up to the nominal volume. If you fill it to the neck, the contents will overflow when the sprayer is fitted, and the dip tube will push the liquid out.

The sprayer dispenses approximately 0.14 ml per press and is intended for water-based and alcohol-based liquids. Thicker products, solutions with a high proportion of glycerine, emulsions and oils may spurt in a stream instead of a mist or clog the nozzle. We recommend checking how your particular formulation behaves in the sprayer on a small sample before filling a larger quantity.

Good to know

Before the first filling, wash the bottle, disinfect it with isopropyl alcohol or ethanol and leave it to dry completely. Rinse the sprayer with clean water or alcohol, press it several times without any liquid and leave it to dry. Residual water in the dip tube would dilute the first doses of the product and, in anhydrous formulations, may also cause cloudiness.

The set can be used repeatedly. When changing the contents, take the sprayer apart, rinse the dip tube and the nozzle and remove any residue of the previous product. Drying residues containing sugars or thickeners clog the nozzle more often than water-based solutions.

The sprayer body is made of polypropylene and the collar of aluminium. For alcohol-based products with a higher content of essential oils, or for perfume compositions, check whether the sprayer material changes its appearance over time and whether it transfers any odour. Amber glass slows the effect of light, but it does not replace a preservative system in water-based products. The bottle has the same neck type as other closures in our range, where you will also find ready-made combinations.

Once empty and washed, the bottle is sorted as glass. The sprayer consists of several materials and belongs with plastics. Remove the aluminium collar before disposal if your local collection system allows it.

Frequently asked questions