GLASS BOTTLES 30 ml
Clear Frosted Glass Bottle, Glossy Golden Black Pump with Smoky Overcap, 30 ml
The 30 ml glass bottle with a black and gold pump is intended for serums, facial oils, fluids and light creams that are applied in small doses. full description
Lowest price in the last 30 days: €1.28
Total for 1 pcs: €1.28
Quantities add up across all combinations of this bottle.
Product description
The 30 ml glass bottle with a black and gold pump is intended for serums, facial oils, fluids and light creams that are applied in small doses. The frosted glass softens incoming light while still hinting at the level of the contents, so you can tell when the bottle is nearly empty. The glossy pump with a smoky overcap gives the packaging the look of a finished product that holds its own on a bathroom shelf as well as in retail.
The set is supplied as a matched pair: a bottle with an 18 mm neck and a pump with the same thread diameter. You do not need to buy anything else or work out what fits what.
What the set is suitable for
The small volume and push-to-dispense action suit products of which only a little is used each time and which should not come into unnecessary contact with air or fingers.
- Facial serums and fluids – water-based and emulsion serums are dispensed precisely, and the contents of the bottle stay covered during use.
- Facial and hair oils – the pump replaces the dropper where an oil should be dispensed evenly and without running down the neck.
- Light creams and emulsions – the pump draws up thinner textures without problems, while thick creams may not make it through the dip tube.
- Samples and travel size – the smaller volume is suitable for travel and for introducing a product to customers.
How the pump works
The pump draws up the contents through a dip tube from the bottom and dispenses approximately 0.14 ml with each press. You can therefore set the amount for each use by the number of presses. The smoky overcap protects the pump head from dust and from accidental pressing in a bag.
Before first use, the pump needs to be “primed” several times: press it repeatedly with nothing coming out until the dip tube fills and the contents start to emerge. After the bottle is used up, a small residue remains below the end of the dip tube, which should be taken into account when filling.
The dip tube of the pump is longer than the bottle. If, after screwing the pump on, it reaches the bottom and bends, shorten it with a diagonal cut so that it ends just above the bottom. A diagonal cut prevents the end of the tube from sticking to the glass and the pump from ceasing to draw up the contents.
Good to know
The nominal volume of the bottle is 30 ml. This is the volume the packaging is designed for under normal filling. The brimful capacity given in the parameters is the physical volume up to the neck. The difference between the two serves as a reserve for the dip tube and the body of the pump and for the expansion of the contents when the temperature changes. Fill to the nominal volume, not to the brim, otherwise part of the contents will overflow when the pump is screwed on.
Suitability for contact with cosmetics is declared separately for the glass bottle. For the pump, we recommend checking its behaviour with your specific formulation, especially with products containing a higher proportion of essential oils or alcohol. A short test with a filled bottle under normal conditions of use will show how the plastic parts behave.
Frosted glass softens light but does not block it the way amber or blue glass does. For products with light-sensitive ingredients, such as vitamin C or retinoids, consider dark glass or storage away from direct light.
Before first filling, wash the bottle and the pump, disinfect them with isopropyl alcohol or ethanol and leave them to dry completely. Residual water in the bottle or in the dip tube will get into even an anhydrous product and reduce its stability.
Once empty, the bottle can be washed and used again. The pump is harder to clean, because the dip tube and the internal mechanism cannot be rinsed through completely. When you change the formulation, it is better to fit a new one. For recycling, the glass bottle belongs with glass, while the pump combines plastic and aluminium and is disposed of separately from the bottle.
For a bottle with this type of neck, the Handymade range also includes other closures and ready-made combinations. If you put together your own combination, we recommend checking the tightness of the thread, the dispensing and the behaviour of the packaging with your specific formulation.
Frequently asked questions
Parameters
Clear frosted glass bottle, 18 mm, 30 ml
Product documentation
- PPWRPackaging Declaration (PPWR)
- PDF ↓
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.


























































































