+421 950 333 113info@handymade.storeHandymade Days: −10 % on all ready-made productsShop now

GLASS BOTTLES 50 ml

Clear Frosted Glass Bottle, Glossy Golden Black Pump with Smoky Overcap, 50 ml

Pack size15 ml30 ml50 ml

The glass bottle with pump, 50 ml , is designed for filling with liquid and semi-liquid cosmetic products that are dispensed in small amounts: serums, facial fluids, light emulsions or oil blends. full description

AvailabilityPre-order
Product codeO18SN050-OVD18PZCL
€1.42incl. VAT

Lowest price in the last 30 days: €1.42

Expected back in stock: 25 Nov.This variant is currently out of stock — your order will be a pre-order and delivery may take longer.
Volume pricing
1–199 pcs€1.42Your price
200–999 pcs€1.35−5 %
1000–4999 pcs€1.25−12 %
from 5000 pcs€1.12−21 %

Total for 1 pcs: €1.42

Quantities add up across all combinations of this bottle.

Product description

The glass bottle with pump, 50 ml, is designed for filling with liquid and semi-liquid cosmetic products that are dispensed in small amounts: serums, facial fluids, light emulsions or oil blends. The pump dispenses the contents without unscrewing the closure and without fingers touching the product, which reduces the risk of introducing impurities into serums and emulsions.

The set consists of a bottle made of frosted glass with an 18 mm thread and a plastic pump in a glossy black and gold finish with a smoky overcap. The glass remains partly clear, so you can see the fill level at a glance. The bottle and closure are supplied together, so there is no need to check whether they fit.


What the set is suitable for

  • Facial serums and fluids – low viscosity and a small dose per press, dispensed without opening the bottle.
  • Light O/W emulsions – facial products with a thinner consistency that pass through the pump tube.
  • Oil serums and vegetable oil blends – liquid formulations that are dispensed in drops or small doses.
  • Samples and travel packs – a volume of 50 ml is enough for testing a recipe or for a smaller batch for customers.

Pump and filling

One press of the pump releases approximately 0.14 ml of the contents. The actual amount depends on the viscosity of the formulation. After filling and screwing on the pump, prime it by pressing it several times until the tube and mechanism are filled and the contents begin to flow smoothly.

The nominal volume of 50 ml is the volume the bottle is designed for under normal filling. The brimful volume is the physical volume up to the neck and is given in the parameters. The difference is a reserve for the tube and the body of the pump, which take up part of the space once screwed on. Fill to the nominal volume, not to the brim, otherwise the contents will overflow when the pump is fitted.

Before filling a whole batch, fill one bottle as a test and check that the pump draws your recipe smoothly. Thick creams and emulsions with a high proportion of wax may pass through the tube with difficulty or jam in the mechanism.


Good to know

Before the first filling, wash and disinfect the bottle and leave it to dry completely. The tube and the pump mechanism can be rinsed, but fully dismantling and cleaning the inside of the pump is limited. For repeated use, the pump is therefore better suited to the same type of formulation.

Glass may crack when filled with a hot emulsion because of a sudden change in temperature. Fill emulsions only after they have cooled down, and do not leave the bottle in the cold before filling.

The pump is made of polypropylene with aluminium and plastic parts. For recipes with a high proportion of essential oils, alcohol or other solvents, we recommend testing how the pump behaves with your specific formulation, especially the tightness and the condition of the plastic parts after several weeks.

Based on the technical documentation, the glass bottle is confirmed as suitable for contact with cosmetic products. No such declaration is given for the pump, so the set as a whole is not declared as suitable for contact with cosmetics. The manufacturer of the cosmetic product is responsible for verifying compatibility with their own recipe. The set is not intended for contact with food.

Replacement closures with the same type of neck as stated in the parameters, and other ready-made packaging plus closure combinations, can be found in the Handymade range. If you make your own combination, we recommend testing the tightness and dispensing with your specific formulation. The material codes of the bottle and the pump for waste sorting can be found in the parameters.


Frequently asked questions

How much product does the pump of the 50 ml glass bottle dispense per press?
One press releases approximately 0.14 ml of the contents. The actual amount depends on the viscosity of the formulation and on whether the mechanism is completely filled. After fitting the pump for the first time, prime it by pressing it several times until the tube is filled. With thicker emulsions, the dose is usually smaller and uneven.
Can a thick cream be filled into the glass bottle with pump?
The pump is suitable for liquid and semi-liquid formulations, and thick creams will generally not pass through it. The tube has a small diameter and the pump mechanism is designed for serums, fluids and light emulsions. For creams with a higher proportion of butters and waxes, we recommend adjusting the consistency or choosing a jar.
Why is the 50 ml glass bottle not filled to the brim?
The bottle is filled to the nominal volume of 50 ml because the tube and the body of the pump take up part of the space above it. The brimful volume is larger and is given in the parameters. If you fill to the brim, the contents will overflow when the pump is screwed on and part of the formulation will be wasted.
Can the glass bottle with pump be reused?
After washing and disinfection, the glass bottle can be reused without limit. The pump can be rinsed, but fully cleaning the inside of the mechanism is limited, so for repeated use we recommend filling the same type of product. When changing the formulation, it is safer to replace the pump with a new one with the same type of neck.
Is the 50 ml glass bottle with pump suitable for contact with cosmetics?
The glass bottle is confirmed as suitable for contact with cosmetic products, while no such declaration is given for the pump. The set as a whole is therefore not declared as suitable for contact with cosmetics, and the manufacturer of the product must verify the compatibility of the pump with their own recipe. The set is not intended for contact with food.

Parameters

Glass bottle, frosted clear, 18 mm, 50 ml

Product colour
Frosted
Country of origin
India
Nominal capacity
50
Brimful capacity
57 ml
Diameter
37,8 mm
Thread type
18/410
Height
92,3 mm
Product material
Glass

Plastic dispenser, glossy black and gold, smoke top, 18/415

Product colour
BlackGold
Country of origin
China
Diameter
22,96 mm
Thread type
18/415
Height
40,81 mm
Tube length
115 mm
Dose
0,14 ml

Product documentation

PPWRPackaging Declaration (PPWR)
Glass bottle, frosted clear, 18 mm, 50 ml · O18SN050PDF ↓
Plastic dispenser, glossy black and gold, smoke top, 18/415 · OVD18PZCLPDF ↓
PDSProduct Data Sheet
Glass bottle, frosted clear, 18 mm, 50 ml · O18SN050PDF ↓
Plastic dispenser, glossy black and gold, smoke top, 18/415 · OVD18PZCLPDF ↓
DrawingTechnical drawing
Glass bottle, frosted clear, 18 mm, 50 ml · O18SN050PDF ↓
Plastic dispenser, glossy black and gold, smoke top, 18/415 · OVD18PZCLPDF ↓
Download all (ZIP)

6 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.