+421 950 333 113info@handymade.store−10 %Shop now

GLASS BOTTLES 30 ml

Clear Frosted Glass Bottle, Matte Black Dropper With Shiny Strip, 30 ml

Pack size15 ml30 ml50 ml

The 30 ml glass bottle with dropper is designed for filling facial serums, cosmetic oils and tinctures , that is, products that are dispensed drop by drop and applied directly to the skin or to the palm. full description

AvailabilityIn stock · 450 pcs
Product codeO18SN030-OVK18CLM071
€1.03incl. VAT

Lowest price in the last 30 days: €1.03

Volume pricing
1–199 pcs€1.03Your price
200–999 pcs€0.98−5 %
1000–4999 pcs€0.91−12 %
from 5000 pcs€0.82−21 %

Total for 1 pcs: €1.03

Quantities add up across all combinations of this bottle.

Product description

The 30 ml glass bottle with dropper is designed for filling facial serums, cosmetic oils and tinctures, that is, products that are dispensed drop by drop and applied directly to the skin or to the palm. The frosted matte glass diffuses light, yet the liquid level remains visible through the wall, so you can see how much product is left in the bottle. The black matte dropper with glossy stripe gives the packaging a darker, understated look that pairs well with oil serums and products without a strong colour.

The set consists of the bottle and the dropper, so nothing else needs to be purchased. Both components are declared suitable for contact with cosmetics, and the declaration of conformity is available with the product. The set is not intended for filling food.


What it is suitable for

  • Facial and hair serums – water-based and oil-based serums with active ingredients, dispensed in a few drops per use.
  • Facial and body oils in a small pack – 30 ml is enough for trying out a new recipe or for a travel pack, without a large stock that would sit open for a long time.
  • Oil blends with essential oils – diluted blends for spot application, cuticles or the scalp, where an exact number of drops matters.
  • Tinctures and alcohol extracts – dispensing by drops makes it easier to dilute them in water or in a finished toner.
  • Customer samples – the same packaging for a whole series of samples gives a uniform look.

How to use the dropper

The dropper is screwed onto the bottle neck and closes the bottle at the same time. You draw up the contents by squeezing the silicone bulb, the product enters the glass tube, and when the pressure is released it can be squeezed out drop by drop. The contents come into contact mainly with the glass of the tube, and the plastic threaded ring is made of PP.

Comfortable dispensing depends on the viscosity of the contents. Liquid serums, oils and tinctures are drawn up easily and form regular drops. Thicker gels or serums with a higher proportion of thickener enter the tube slowly and come out in a stream instead of drops. A different type of closure is more suitable for such formulations. You will find closures with the same neck finish (stated in the parameters) and ready-made combinations in the Handymade range. If you make your own combination, we recommend checking the seal and dispensing with your specific formulation.

For oil serums with a higher proportion of essential oils and for alcohol tinctures, leave the filled set to stand for several days and check the bulb and the ring of the dropper. The behaviour of plastic and silicone with concentrated fragrance components varies depending on the recipe, and a test with your own product will show it most reliably.


Nominal and total volume

The figure of 30 ml is the nominal volume, that is, the amount the bottle is designed for in normal filling. The total volume to the brim, stated in the parameters, is the physical volume up to the neck. The difference between them provides a reserve for the dropper tube, which is immersed in the contents after closing, and for the air space above the liquid level.

Fill the bottle to the nominal volume, not to the brim. A bottle filled up to the neck will overflow when the dropper is screwed on, and the contents will get onto the thread, where they become sticky and impair the seal.


Good to know

Before the first filling, wash and disinfect the bottle and the dropper with isopropyl alcohol or ethanol and leave them to dry completely. The dropper is disinfected by drawing the alcohol into the tube several times and squeezing it back out, then leaving the residue to evaporate. Residual water from poorly dried packaging must not get into a product without a preservative, such as pure oil.

The glass bottle is reusable. After it is emptied, it is enough to wash it and disinfect it again. The dropper is also rinsed when the contents are changed. However, when switching from a fragrance oil to another product, the original scent may remain in the silicone bulb, and in that case it is better to use a new dropper.

The glass withstands the usual filling temperature of cosmetics, but sudden temperature changes are not good for it. Let a hot oil phase or a freshly boiled extract cool to at least room temperature before filling, and do not fill a cold bottle with hot contents.

For recycling, the bottle is sorted as glass. The dropper combines glass, PP and silicone, so it is separated from the bottle before disposal.


Frequently asked questions

Does the 30 ml frosted glass bottle protect the contents from light?
Partially. The frosted matte glass diffuses light, but it does not block it the way dark glass does. For serums and oils stored in a cabinet or in a box, this is sufficient. For products that will stand in light for a longer time, consider amber or blue glass.
How much fits into the 30 ml glass bottle with dropper?
The bottle is designed for 30 ml of contents, which is its nominal volume. Physically it is slightly larger, and the total volume to the brim is stated in the parameters. The difference serves as a reserve for the dropper tube and for the air above the liquid level, so the bottle is filled to the nominal volume and not up to the neck.
Can the glass bottle with dropper be reused?
Yes, both the bottle and the dropper can be filled again after washing and disinfection. Wash the bottle, disinfect it with alcohol and leave it to dry. Rinse the dropper by drawing up and squeezing out alcohol. If the previous contents had a strong scent, the scent may remain in the silicone bulb, and in that case it is better to replace the dropper.
Is the dropper suitable for oil serums and for alcohol tinctures?
Yes, the set is intended for liquid cosmetic products, including oil serums, diluted blends with essential oils and tinctures. The contents touch mainly the glass of the bottle and the glass tube of the dropper. For recipes with a high proportion of essential oils or alcohol, we recommend checking the behaviour of the bulb and the ring of the dropper with your specific formulation.
Is the 30 ml glass bottle with dropper suitable for food?
No, the set does not have a certificate for food contact and is not intended for filling food. Both the bottle and the dropper are declared suitable for contact with cosmetics. The set is therefore used for serums, oils, tinctures and other cosmetic preparations.

Parameters

Clear frosted glass bottle, 18 mm, 30 ml

Product colour
Frosted
Country of origin
China
Nominal capacity
30
Brimful capacity
35 ml
Diameter
33 mm
Thread type
18/410
Height
78,8 mm
Product material
Glass

Glass Dropper, Matte Black With Shiny Strip, 71 mm

Product colour
Black
Country of origin
China
Thread type
18/415
Dropper length
71 mm
Product material
GlassPPSiliconePlastic

Product documentation

PPWRPackaging Declaration (PPWR)
Glass Dropper, Matte Black With Shiny Strip, 71 mm · OVK18CLM071PDF ↓
PDSProduct Data Sheet
Clear frosted glass bottle, 18 mm, 30 ml · O18SN030PDF ↓
Glass Dropper, Matte Black With Shiny Strip, 71 mm · OVK18CLM071PDF ↓
DrawingTechnical drawing
Clear frosted glass bottle, 18 mm, 30 ml · O18SN030PDF ↓
Glass Dropper, Matte Black With Shiny Strip, 71 mm · OVK18CLM071PDF ↓
Download all (ZIP)

5 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.