GLASS BOTTLES 15 ml
Clear Glass Bottle, Black Fine Mist Sprayer, Smoky Overcap, 15 ml
Pack size10 ml12 ml15 ml30 ml50 ml100 ml
A clear glass bottle with a capacity of 15 ml and a black fine mist sprayer with a smoky overcap is a small pack for thin liquids that are applied by spraying. full description
Lowest price in the last 30 days: €0.63
Total for 1 pcs: €0.63
Quantities add up across all combinations of this bottle.
Add 99 more pcs and the price drops to €0.60/pc.
Product description
A clear glass bottle with a capacity of 15 ml and a black fine mist sprayer with a smoky overcap is a small pack for thin liquids that are applied by spraying. The clear glass shows the colour and purity of the contents, the smoky overcap covers the nozzle, and the set does not need any additional closure. It is supplied as a ready-made pair, so the bottle and sprayer fit together and you do not have to match them yourself.
The small volume is particularly suited to facial and hair sprays, hydrosols, toners and perfumed waters in travel or sample sizes. Both parts are declared suitable for contact with cosmetic products. The set is not intended for food.
What the set is suitable for
- Facial toners and hydrosols – thin water-based preparations are applied evenly by the sprayer, without your hands touching the contents.
- Perfumed waters and body sprays – alcohol and water-alcohol bases are sprayed as a fine mist, and glass does not react with alcohol.
- Hair sprays and fresheners – light water-based mixtures with a hydrosol or a solubilised essential oil.
- Samples and travel packs – one filling gives more than a hundred doses, which is enough to try out a recipe or for a few weeks of travelling.
Nominal and total volume
The nominal volume is the amount the bottle is designed for in normal filling. The total brimful volume is the physical volume up to the neck. The difference between them is a reserve for the sprayer’s dip tube and for expansion of the contents when the temperature changes. Therefore, fill only up to the nominal volume, not to the brim. If the bottle is overfilled, the contents may be forced out through the neck once the sprayer is screwed on.
The sprayer’s dip tube is longer than the height of the bottle. Before the first filling, shorten it with a diagonal cut so that it ends just above the bottom. Otherwise it will bend in the bottle and will not draw up the last millilitres.
Using the sprayer
One press releases approximately 0.12 ml of the contents. After filling and screwing on the sprayer, press it several times to prime it until the tube and pump fill with liquid and a mist begins to form. The sprayer works with low-viscosity liquids: water, hydrosols, alcohol and their mixtures. Pure oils, serums with a gel consistency or emulsions will either not spray or will clog the pump. A recipe with an oil content requires a solubiliser. Also check that the mist still forms evenly after the product has stood for several days.
The smoky overcap protects the nozzle from dust and accidental pressing during transport. Always put it on when storing the bottle in a bag.
Good to know
Before the first filling, wash the bottle, disinfect it with isopropyl alcohol or ethanol and leave it to dry completely. It is enough to rinse the sprayer with alcohol and spray several times so that the alcohol passes through the tube and nozzle as well. Do not immerse the pump in water, as moisture would remain in it.
Clear glass does not protect the contents from light. Store recipes with light-sensitive ingredients, for example some essential oils, extracts or vitamins, in the dark, or choose dark glass. For ordinary toners, hydrosols and perfumed waters that are used up within a few weeks, a clear bottle is suitable.
The sprayer is made of polypropylene. For contents with a high proportion of essential oils or with solvents, test how the pump behaves with your specific formulation in a small quantity before you fill an entire batch.
After washing, the bottle can be used repeatedly. When changing the contents, rinse the sprayer thoroughly, as residues of perfume or alcohol are released gradually from the tube and pump and would affect the scent of the new filling. When sorting waste, the glass and the plastic sprayer belong in separate bins. You can find other closures with the same neck type and further ready-made combinations in the Handymade range. If you make your own combination, check the tightness and dispensing with your specific contents.
Frequently asked questions
Parameters
Clear glass bottle, 18 mm, 15 ml
Product documentation
- PPWRPackaging Declaration (PPWR)
- PDF ↓
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.























































































