PLASTIC BOTTLES
Clear Plastic Bottle, Glossy White-Gold Dispenser, 100 ml
The clear plastic bottle, 100 ml, with a glossy white and gold pump is ready-made packaging for liquid and semi-liquid cosmetic products that are meant to be dispensed in small amounts. full description
Lowest price in the last 30 days: €1.14
Total for 1 pcs: €1.14
Quantities add up across all combinations of this bottle.
Product description
The clear plastic bottle, 100 ml, with a glossy white and gold pump is ready-made packaging for liquid and semi-liquid cosmetic products that are meant to be dispensed in small amounts. One press releases a dose of serum, facial oil or light emulsion for a single application, without tilting the bottle and without the contents coming into contact with your fingers. Through the clear wall you can see the colour of the contents and how much is left.
The set is declared suitable for contact with cosmetics. Only the bottle on its own has a certificate for direct contact with food; the set as a whole is intended for cosmetic products.
What it is suitable for
The pump releases approximately 0.14 ml per press. It is therefore suitable for products that are applied in small doses.
- Serums and fluids – a small dose corresponds to the amount normally applied to the face.
- Facial and body oils – the pump replaces the dropper where the oil should be applied without tilting the bottle.
- Light and medium-thick emulsions – facial lotions and moisturising creams of thin consistency pass through the pump tube.
- Hair serums and oils for the ends – dispensing in small amounts also suits the treatment of hair ends.
Thick creams, butters and high-viscosity gels are not suitable for a pump with such a small dose. The tube draws them in with difficulty and the head may clog over time.
Nominal and total volume
Nominal volume is the volume the bottle is designed for under normal filling. The physical volume up to the neck is larger. The difference serves as a reserve for the pump tube, which takes up part of the space once screwed on, and for the expansion of the contents when the temperature changes. The bottle is therefore filled up to the nominal volume. If it is filled to the brim, the contents will overflow when the pump is fitted or will be pushed out around the thread on the first press.
Before first use, press the pump several times until the tube and head have filled with the contents. With thicker emulsions, expect priming to take longer.
Good to know
Light. Clear PET does not protect the contents from light. For products containing light-sensitive ingredients, choose dark packaging or store the finished product away from direct sunlight.
Contents and material. The bottle is declared for cosmetic products, but do not expose it to aggressive chemicals. For products with a high proportion of essential oils, fragrance compositions or solvents, check how the packaging behaves on a test sample. After several weeks, look for clouding of the wall and softening of the material, and check that the thread still seals tightly.
Preparation before filling. Wash the bottle and pump before the first filling, disinfect them with isopropyl alcohol or ethanol and leave them to dry completely. Moisture in the tube would get into the finished product.
Reuse. The bottle can be reused after thorough washing. The pump is harder to clean, as the inside of the valve and tube cannot be inspected by eye. When changing the recipe or for products without a preservative, therefore use a new pump.
Closures. You can find the bottle neck type in the parameters. Other closures with the same neck type and further ready-made bottle + closure combinations are available from Handymade. If you combine them yourself, check the tightness, dispensing and behaviour of the packaging with your specific formulation.
Besides plastic, the pump also contains an aluminium part. For strongly acidic or alkaline products and for recipes with a higher electrolyte content, check whether the metal part comes into contact with the contents and whether its appearance changes during storage.
Recycling. The bottle is made of PET and belongs in sorted plastic. The pump combines plastic and aluminium, so separate it from the bottle before disposal.
Frequently asked questions
Parameters
Clear plastic bottle, 100 ml
- Product colour
- Clear
- Country of origin
- European Union
- Nominal capacity
- 100
- Diameter
- 38 mm
- Thread type
- G18x3
- Height
- 122 mm
Product documentation
- PPWRPackaging Declaration (PPWR)
- PDF ↓
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.






































































