+421 950 333 113info@handymade.store−10 %Shop now

PLASTIC BOTTLES

Clear Plastic Bottle, White-Silver Sprayer, 100 ml

Pack size10 ml50 ml100 ml

A clear 100 ml PET bottle with a white and silver fine mist sprayer makes a ready-to-use set for liquid cosmetic products that are applied as a spray. full description

AvailabilityIn stock · 186 pcs
Product codeO18PP100-OVR18PSBL
€1.16incl. VAT

Lowest price in the last 30 days: €1.16

Volume pricing
1–199 pcs€1.16Your price
200–999 pcs€1.09−6 %
1000–4999 pcs€1.01−13 %
from 5000 pcs€0.90−22 %

Total for 1 pcs: €1.16

Quantities add up across all combinations of this bottle.

Product description

A clear 100 ml PET bottle with a white and silver fine mist sprayer makes a ready-to-use set for liquid cosmetic products that are applied as a spray. It is especially suitable for toners, hydrosols and facial mists, hair sprays, refreshing body sprays and alcohol-based hand products. The clear material shows the colour and level of the contents, so you can see how much product is left and whether any cloudiness or sediment has appeared.

The whole set is declared suitable for contact with cosmetics. Only the bottle has a certificate for direct contact with food, while the sprayer does not, so the set as a whole is intended for cosmetic use.


What the set is suitable for

The sprayer disperses the contents into a fine mist, which suits thin water-based and alcohol-based liquids. One press releases approximately 0.14 ml, so a toner or hydrosol is applied in a thin layer and does not run. With a volume of 100 ml, this amounts to hundreds of presses, which is enough for a daily-use facial mist or hair spray.

  • Toners and hydrosols – low-viscosity water-based products spray evenly and without dripping.
  • Facial and body mists – a fine mist is suitable for refreshing the skin during the day and for setting make-up.
  • Hair sprays – light water-based moisturising or styling sprays, optionally with a low proportion of solubilised oils.
  • Alcohol-based products – hand sprays or fresheners containing ethanol, where the clear bottle shows the purity of the contents.

The sprayer cannot cope with thick oils, milk-type emulsions or products with a gel consistency. The dip tube draws them up only with difficulty, and the nozzle releases a stream or individual drops instead of a mist. For such textures, we recommend a bottle with a pump or cap.


The bottle and sprayer as a set

The bottle is made of PET, which is lightweight and, unlike glass, does not break when dropped. For sprays that are carried in a handbag, to the gym or on journeys, this is a significant advantage. The sprayer combines polypropylene and aluminium in a glossy white and silver finish.

Both parts have the same neck finish, stated in the parameters, and are supplied already matched. If you combine the bottle with another closure from the Handymade range, we recommend checking the tightness, dispensing and behaviour of the packaging with your specific formulation.

Before first filling, wash the bottle and the sprayer, disinfect them with isopropyl alcohol or ethanol and leave them to dry completely. After disinfection, spray clean water through the sprayer several times so that no disinfectant residue remains in the dip tube and nozzle.


Filling and volume

The nominal volume is the quantity the packaging is designed for under normal filling. The brimful volume is the physical volume of the bottle up to the neck and is slightly larger. The difference provides a reserve for the sprayer dip tube, which displaces part of the volume when screwed on, and for the expansion of the contents when the temperature changes. The bottle should therefore be filled to the nominal volume, not to the brim. If you fill it up to the neck, the contents will overflow when the sprayer is screwed on.

When filling alcohol-based products, leave a slightly larger reserve. Ethanol expands more noticeably than water when heated, and in an overfilled bottle it creates pressure that can push the contents out through the nozzle.


Good to know

Clear plastic does not protect the contents from light. Products with light-sensitive ingredients, such as some plant extracts, vitamin C or citrus essential oils, change more quickly in a clear bottle. For such formulations, an amber or blue bottle is more suitable, or the finished spray can be stored in the dark.

PET is not intended for hot filling. Let the contents cool to room temperature before filling, otherwise the bottle may become deformed. Do not expose the bottle to products with a high proportion of pure essential oils, solvents or other aggressive substances either, as the material may turn cloudy or soften. At the concentrations common in hydrosol and toner formulations this is not a problem; in borderline cases, we recommend testing the behaviour of the packaging on one sample.

The contents of a bottle with a sprayer come into contact with air at every press, because the dip tube draws up the liquid and air is drawn into the bottle. Water-based products that are not used up within a few days therefore need a preservative, just as in any other packaging.

The set can be used repeatedly. When changing the contents, rinse the bottle and the sprayer thoroughly, spray clean water through the dip tube and disinfect again before the next filling. If the nozzle becomes blocked with dried contents, soaking it in warm water and spraying repeatedly helps. The bottle goes into plastic recycling as PET, while the sprayer combines polypropylene with aluminium, so unscrew it before recycling and dispose of it separately.


Frequently asked questions

Is a 100 ml plastic bottle with a sprayer suitable for hydrosol and toner?
Yes, thin water-based liquids such as hydrosol or toner are the most suitable contents for this set. The sprayer disperses them into a fine mist, and the PET bottle does not react with the water phase or with common preservatives. Use hydrosols without a preservative quickly, as the air that enters during spraying shortens their shelf life.
Can an alcohol-based spray be filled into a clear PET bottle?
Yes, products containing ethanol, such as hand sprays or fresheners, can be filled into this bottle. Fill them only to the nominal volume with a larger reserve, so that the contents are not pushed out through the nozzle by pressure when heated. High-percentage solvents and pure essential oils are not recommended in PET in the long term.
Does the clear bottle protect the contents from light?
No, clear PET lets light through and does not protect the contents from it. Products with light-sensitive ingredients, for example vitamin C or citrus essential oils, lose their effect and change colour more quickly in it. For such formulations, choose an amber or blue bottle, or store the spray in the dark.
Why should I not fill the bottle to the brim?
The bottle is filled to the nominal volume because the sprayer dip tube takes up part of the space once screwed on, and the contents expand when the temperature changes. An overfilled bottle overflows when the closure is screwed on or pushes the contents out through the nozzle. The reserve above the liquid level also makes it easier for the liquid to be drawn up during the first presses.
Can the bottle with a sprayer be reused?
Yes, the bottle and the sprayer can be filled again after thorough cleaning. Rinse both parts with water, spray clean water through the dip tube and nozzle, disinfect with isopropyl alcohol or ethanol and leave to dry. When changing the type of contents, for example from an oil-based spray to a water-based one, repeat the cleaning twice.
Is the bottle and sprayer set approved for contact with food?
No, the set as a whole is intended for cosmetics. Only the clear PET bottle has a certificate for direct contact with food, while the sprayer has no such assessment. Both parts are declared suitable for cosmetic products.

Parameters

Clear plastic bottle, 100 ml

Product colour
Clear
Country of origin
European Union
Nominal capacity
100
Diameter
38 mm
Thread type
G18x3
Height
122 mm
Product material
PETPlastic

Fine Mist Sprayer, 18/415, white-silver, glossy, 100 mm

Product colour
SilverWhite
Country of origin
China
Diameter
23 mm
Thread type
18/415
Height
43 mm
Tube length
115 mm
Dose
0,14 ml

Product documentation

PPWRPackaging Declaration (PPWR)
Clear plastic bottle, 100 ml · O18PP100PDF ↓
Fine Mist Sprayer, 18/415, white-silver, glossy, 100 mm · OVR18PSBLPDF ↓
PDSProduct Data Sheet
Clear plastic bottle, 100 ml · O18PP100PDF ↓
Fine Mist Sprayer, 18/415, white-silver, glossy, 100 mm · OVR18PSBLPDF ↓
DrawingTechnical drawing
Clear plastic bottle, 100 ml · O18PP100PDF ↓
Fine Mist Sprayer, 18/415, white-silver, glossy, 100 mm · OVR18PSBLPDF ↓
Download all (ZIP)

6 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.