GLASS BOTTLES 30 ml
Blue Glass Bottle, Glossy White Dropper, 30 ml
Pack size5 ml10 ml15 ml30 ml50 ml
Glass bottle, blue, white glossy dropper , 30 ml is a small medicine bottle made of blue glass with a dropper, intended for liquids dispensed drop by drop: facial serums , oil concentrates, essential oil blends in a… full description
Lowest price in the last 30 days: €1.04
Total for 1 pcs: €1.04
Quantities add up across all combinations of this bottle.
Product description
Glass bottle, blue, white glossy dropper, 30 ml is a small medicine bottle made of blue glass with a dropper, intended for liquids dispensed drop by drop: facial serums, oil concentrates, essential oil blends in a carrier oil, or cuticle oils. Blue glass reduces the amount of light reaching the contents, so it is particularly suitable for formulations with more sensitive ingredients, for example vitamins, vegetable oils prone to oxidation, or a higher proportion of essential oils.
The bottle and the dropper have the same thread and are supplied as a ready-made pair, so there is no need to choose a closure. The 30 ml volume corresponds to a common serum or facial oil pack that lasts several weeks of use, and it is also enough for a smaller test batch when developing your own formulation. The white glossy cap of the dropper stands out clearly against the blue glass, which helps you tell several bottles apart on a shelf.
What it is suitable for
- Facial and hair serums – both water-based and oil-based, as long as they have a thin consistency that the dropper can draw up without difficulty.
- Facial oils and oil blends – compositions of several vegetable oils with an added antioxidant or oil-soluble active ingredients.
- Diluted essential oil blends – massage and aromatherapy blends in a carrier oil, where an exact dose in drops is required.
- Oils for cuticles, beards and hair ends – a small amount applied directly to the spot.
- Working samples and concentrates – when testing formulations, the dropper is used to measure a small amount of an active ingredient or fragrance composition into a test batch.
Thicker emulsions, gels and creams do not belong in this bottle. The dropper cannot draw them up, and they are difficult to dispense through the narrow neck.
Volume and filling
Two figures are distinguished for packaging. The nominal volume is the amount the bottle is designed for under normal filling, here 30 ml. The total brimful volume, given in the parameters, is the physical volume of the glass up to the neck. The difference between them leaves room for the glass tube of the dropper, which pushes part of the contents upwards when screwed in, and for the expansion of the liquid when the temperature changes.
Fill the bottle up to the nominal volume, not to the brim. When you insert the dropper for the first time, check where the level rises to and adjust the amount accordingly, especially with thicker oils.
Dropper and dispensing
The dropper consists of a threaded cap, a bulb and a glass tube. The length of the tube is matched to this bottle and reaches close to the bottom, so you can draw up the remaining contents without tilting the bottle. To dispense, squeeze the bulb before immersing the tube, release it below the surface, and then press slowly to release drops. The size of a drop depends on the density and surface tension of the liquid. A thin water-based serum gives smaller drops than a thick oil.
The dropper is not an airless system. Air enters the bottle each time you draw up the contents. For oils that are sensitive to oxidation, consider adding an antioxidant, for example vitamin E (Tocopherol). Water-based formulations require a preservative.
Good to know
Before filling for the first time, wash and disinfect the bottle and the dropper with isopropyl alcohol or ethanol and let them dry completely, including the inside of the tube. Residual water would dilute a water-based serum and create conditions for microbial growth in an oil-based filling. The same procedure applies when reusing the bottle, and it is also worth checking the flexibility of the bulb and the seal of the cap.
Glass does not tolerate sudden changes in temperature. Do not pour a hot oil phase into a cold bottle; let it cool to at least lukewarm first. The bulb and the plastic parts of the dropper come into contact with the contents and their vapours. For undiluted essential oils, D-limonene or other solvents, we therefore recommend testing their behaviour on one bottle before you fill the whole batch.
The set is declared suitable for contact with cosmetics. It is not intended for food, so do not use it for homemade oils, syrups or herbal infusions.
Other closures with the same neck type also fit the bottle, and ready-made combinations of packaging and closure are offered separately in the Handymade range. If you make your own combination, we recommend checking the tightness and dispensing with your specific formulation. The bottle belongs in glass waste. The dropper is made of several materials, so separate it from the bottle before recycling.
Frequently asked questions
Parameters
Glass bottle, vial, blue, 18 mm, 30 ml
Glass Dropper, Glossy White, 71 mm
Product documentation
- PPWRPackaging Declaration (PPWR)
- PDF ↓
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.



















































