GLASS BOTTLES 50 ml
Green Glass Bottle, Lotion Pump, 50 ml
Pack size10 ml15 ml30 ml50 ml100 ml
Green glass medicine bottle, lotion pump, 50 ml This set of a green glass medicine bottle with a volume of 50 ml and a black plastic lotion pump is used for filling and dispensing your own creams, facial emulsions, body… full description
Lowest price in the last 30 days: €1.17
Total for 1 pcs: €1.17
Quantities add up across all combinations of this bottle.
Add 87 more pcs and the price drops to €1.11/pc.
Product description
Green glass medicine bottle, lotion pump, 50 ml
This set of a green glass medicine bottle with a volume of 50 ml and a black plastic lotion pump is used for filling and dispensing your own creams, facial emulsions, body lotions or thicker serums. The cream is dispensed from the bottle by pressing the pump head. This way the contents are not taken out with the fingers and the bottle does not have to be opened each time it is used, which makes hygienic use of the finished product easier, both in home production and in smaller professional production.
Tinted glass blocks some of the light that reaches the contents, so it is suitable for emulsions with vegetable oils, extracts or essential oils, which change more quickly in light. The medicine bottle is narrow and tall, and takes up little space on a shelf or in a cosmetic bag. Both parts are suitable for contact with cosmetics, and the declaration of conformity and technical documentation are available with the product. The set is not approved for contact with food, so it is not used for homemade oils or syrups.
What the set is suitable for
- Facial creams and emulsions – day and night creams, eye creams or creams for the décolleté area, which are dispensed in small amounts.
- Body lotions and lighter creams – the volume of 50 ml corresponds more to a travel pack or a sample, so for an everyday body lotion it is better to consider a larger bottle.
- Thicker serums and fluids – the lotion pump can handle textures that are difficult to dispense from a pump for watery serums.
- Hand and foot creams – a small pack that you can carry with you and dispense with one hand.
Dispensing
With one press, the pump dispenses approximately 0.12 ml. Two to three presses are usually enough for a facial cream, and more for a body cream. When using it for the first time, the pump head needs to be pressed several times until the dip tube fills and the cream starts to come out.
The pump is designed for creams and emulsions. Very thick creams, butters or products with a higher proportion of solid ingredients may be difficult to dispense or may remain in the dip tube. Check how your specific recipe behaves in the pump on one pack before you fill the whole batch.
Nominal and total volume
The nominal volume of 50 ml is the amount the bottle is designed for in normal filling. The total brimful volume is the physical volume up to the neck, and you will find it in the parameters. The difference between them is a reserve for the dip tube, for the air above the contents and for any expansion of the cream when the temperature changes. Fill up to the nominal volume. If you filled the bottle up to the brim, the cream would be pushed out through the neck when the pump is screwed on, and the dip tube could not be immersed.
Good to know
Preparation before first filling. We recommend washing the bottle and the pump, disinfecting them with isopropyl alcohol or ethanol and leaving them to dry completely. Residual water in the dip tube or at the bottom of the bottle can dilute the first doses of cream and put unnecessary strain on the preservative system.
Reuse. The glass bottle can be used again after thorough washing and disinfection. The pump is harder to clean, because cream remains in the dip tube and in the mechanism. When refilling, pump warm water with a little washing-up liquid through it, then clean water, and leave it to dry. If you change the fragrance or the recipe, it is safer to use a new pump.
Materials. Glass tolerates cleaning with warm water and disinfection with alcohol, but it should not be exposed to sudden changes in temperature, for example by filling a hot emulsion into a cold bottle. The emulsion is filled once it has cooled, as is usual in cream making. The pump is made of polypropylene, which withstands common cosmetic emulsions. For recipes with a high proportion of essential oils or solvents, check whether the plastic changes its appearance or flexibility over time.
Closures. The bottle has a neck with a diameter of 18 mm. You will find other closures with the same neck type, as well as ready-made bottle and closure combinations, in the Handymade range. If you make your own combination, we recommend checking the tightness, the dispensing and the behaviour of the packaging with your specific formulation.
Recycling. Glass and the plastic pump are sorted separately, so unscrew the pump before disposal.
Frequently asked questions
Parameters
Glass bottle, pharmacy vial, green, 18 mm, 50 ml
Plastic cream dispenser 18 mm, black
Product documentation
- PPWRPackaging Declaration (PPWR)
- PDF ↓
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.





















































































