+421 950 333 113info@handymade.storeActive Days: −10 % with code ACTIVE10Shop now

GLASS BOTTLES 15 ml

Green Glass Bottle, Lotion Pump, 15 ml

Pack size10 ml15 ml30 ml50 ml100 ml

The green glass bottle with a lotion pump, 15 ml , is a set for small quantities of leave-on cosmetics that are applied in measured doses: eye creams, light creams, cream-textured serums, facial emulsions and… full description

AvailabilityIn stock · 466 pcs
Product codeO18SZ015-OVD18PC2
€0.80incl. VAT

Lowest price in the last 30 days: €0.80

Volume pricing
1–199 pcs€0.80Your price
200–999 pcs€0.73−8 %
1000–4999 pcs€0.70−12 %
from 5000 pcs€0.64−21 %

Total for 1 pcs: €0.80

Quantities add up across all combinations of this bottle.

Product description

The green glass bottle with a lotion pump, 15 ml, is a set for small quantities of leave-on cosmetics that are applied in measured doses: eye creams, light creams, cream-textured serums, facial emulsions and concentrates of active ingredients. Green glass filters out part of the light that would otherwise act on the contents, and the pump releases roughly the same amount each time, without you having to open the bottle or reach into it with your fingers.

Both the bottle and the pump are declared as suitable for contact with cosmetic products. The set is not approved for contact with food, so it is intended exclusively for cosmetics.


What it is suited for

A small volume with a pump is worthwhile wherever a product is used up bit by bit and the contents should come into contact with air and fingers as little as possible.

  • Eye and face creams – one dose of approximately 0.12 ml is enough for the eye area or for spot application, and the contents are not scooped out of a jar with a finger.
  • Cream serums and emulsions – light to medium-thick textures that the pump draws up through the dip tube and dispenses without running.
  • Samples and test batches – 15 ml is enough for trying out a new formulation with customers or as a travel size of a finished product.
  • Products with sensitive active ingredients – green glass and closed dispensing together limit the access of light and air to the contents.

Dispensing and filling

The pump draws the contents up through a dip tube. After filling and screwing the pump on, press it several times until the tube and the head fill and the product starts to come out. Bear in mind that some of the contents will remain in the tube and in the mechanism, and a small amount at the bottom of the bottle cannot be pumped out.

The bottle has a nominal volume of 15 ml, but physically it holds more. The nominal volume is the amount the packaging is designed for under normal filling. The remaining space is a reserve for the dip tube and the body of the pump, which take up part of the neck once screwed on, and for the expansion of the contents when the temperature changes. The bottle should therefore be filled up to the nominal volume, not to the brim, otherwise the contents will be pushed out through the neck when the pump is fitted.

Before the first filling, wash the bottle, disinfect it with ethanol or isopropyl alcohol (IPA) and leave it to dry completely. It is enough to rinse the pump and make sure that no water remains in the tube, which would dilute the first doses.

The consistency of the product determines how comfortable dispensing is. Light emulsions and creams of medium thickness come out evenly. Very firm creams, butters and balms are not drawn up by the pump, or they clog it. Very runny serums and oils will pass through, but they drip easily when pressed, so a dropper is more suitable for them. Check how your specific formulation behaves on a sample before you fill the whole batch.


Good to know

The glass withstands normal disinfection and washing in hot water, but not sudden temperature changes. Let a hot emulsion cool to at least room temperature before filling. Rapidly heating cold glass or rapidly cooling hot glass may crack the bottle.

The pump is made of polypropylene (PP), which tolerates both water-based and oil-based cosmetic bases. For products with a high proportion of essential oils, fragrance compositions or alcohol, check whether the mechanism stiffens or changes colour over time. If you combine the packaging and closure yourself, always check the tightness, the dispensing and the behaviour of the packaging with your specific formulation. Closures with the same neck type as stated in the parameters, and ready-made sets, can be found in the Handymade range.

The pump is not a complete barrier against air. A product with a water phase must be properly preserved, just as in any other openable packaging, and the pump only limits direct contact with the contents.

After thorough washing and disinfection, the bottle can be reused. Rinse the pump with warm water after the previous product and leave it to dry. Empty glass belongs in the glass recycling bin and the PP pump in the plastic recycling bin.


Frequently asked questions

Does the green glass of the 15 ml bottle protect active ingredients from light?
Green glass filters out part of the light, but it does not guarantee complete protection from it. Store products containing light-sensitive ingredients, for example vitamin C or retinol, away from direct sunlight. Treat the coloured glass and closed dispensing as additional protection, not as a substitute for a suitably designed formulation with antioxidants.
How much cream does one press of the 18 mm lotion pump dispense?
One press releases approximately 0.12 ml of product, which corresponds to a dose for the eye area or a small area of the face. The actual amount depends on the consistency of the formulation, and firmer creams come out in smaller amounts. For a normal facial treatment, two to three doses are usually used, but check the number with your own product.
Why is the 15 ml glass bottle filled only up to the nominal volume and not to the brim?
Part of the internal space is taken up by the dip tube and the body of the pump once screwed on. If the bottle were filled to the neck, the contents would be pushed over the edge when the pump is fitted. The reserve also leaves room for the expansion of the contents when the temperature changes, which is why the bottle is filled up to the nominal volume stated in the product name.
Can the lotion pump also be used for an oil serum?
The lotion pump is intended primarily for emulsions and creams of medium thickness. A liquid oil will pass through it, but it often drips when pressed and the mechanism does not dispense accurately. A dropper or a sprayer is more suitable for pure oils and watery serums. Choose the lotion pump when the product has the consistency of a facial lotion or a cream.
Can I use the glass bottle with a pump for homemade oils or syrups?
No, this set is not approved for contact with food. Both the bottle and the pump are declared as suitable for cosmetic products, and they have no certificate for food use. They are therefore suitable for creams, serums and emulsions, not for edible oils, syrups or herbal infusions intended for consumption.

Parameters

Glass bottle, vial, green, 18 mm, 15 ml

Product colour
Green
Country of origin
China
Nominal capacity
15
Brimful capacity
18 ml
Diameter
28,5 mm
Thread type
18/410
Height
63,8 mm
Product material
Glass

Plastic cream dispenser 18 mm, black

Product colour
BlackClear
Country of origin
China
Diameter
22,3 mm
Thread type
18/415
Height
40,1 mm
Product material
PPPlastic
Tube length
115 mm
Dose
0,12 ml

Product documentation

PPWRPackaging Declaration (PPWR)
Plastic cream dispenser 18 mm, black · OVD18PC2PDF ↓
PDSProduct Data Sheet
Glass bottle, vial, green, 18 mm, 15 ml · O18SZ015PDF ↓
Plastic cream dispenser 18 mm, black · OVD18PC2PDF ↓
DrawingTechnical drawing
Glass bottle, vial, green, 18 mm, 15 ml · O18SZ015PDF ↓
Plastic cream dispenser 18 mm, black · OVD18PC2PDF ↓
Download all (ZIP)

5 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.