+421 950 333 113info@handymade.storeActive Days: −10 % with code ACTIVE10Shop now

GLASS BOTTLES 50 ml

Clear Glass Bottle, White Safety Cap & Dropper, 50 ml

Pack size5 ml10 ml12 ml15 ml30 ml50 ml100 ml

The set combines a 50 ml glass bottle , a plastic dropper insert and a white screw cap with an 18/410 neck finish, so once filled it can be closed and used straight away. full description

AvailabilityIn stock · 183 pcs
Product codeO18SP050-OVV18PB4
€0.80incl. VAT

Lowest price in the last 30 days: €0.80

Volume pricing
1–98 pcs€0.80Your price
99–1088 pcs€0.77−4 % · 1× plato
1089–5048 pcs€0.73−8 % · 11× plato
from 5049 pcs€0.69−14 % · 51× plato

Total for 1 pcs: €0.80

Quantities add up across all combinations of this bottle.

Add 98 more pcs and the price drops to €0.77/pc.

Product description

The set combines a 50 ml glass bottle, a plastic dropper insert and a white screw cap with an 18/410 neck finish, so once filled it can be closed and used straight away. The dropper insert fitted in the neck releases the contents drop by drop and also acts as a safeguard: if the open bottle is tipped over, the contents do not pour out all at once. Clear glass shows the colour and the level of the contents, which you will appreciate with tinctures, oil blends or serums, where you want to see how much is left.


What the set is suitable for

The 50 ml volume and drop-by-drop dispensing suit liquid products from which only a small amount is taken at a time:

  • Face and hair serums – light oil-based and water-based serums, where a few drops are enough for one use.
  • Oil blends – carrier oil with added essential oils, blends for nails and cuticles, beard oil.
  • Tinctures and drops – the dropper insert makes it easier to measure a dose without pouring.
  • Samples and travel packs – glass with a cap keeps the contents secure in transit, and 50 ml is a reasonable size for trying out a formulation.

Light liquids flow smoothly through the dropper insert. Thicker oils or thickened serums come out more slowly, so test the dispensing before filling a whole batch.


How to work with the set

Fill the bottle, press the dropper insert into the neck and tighten the cap. When dispensing, tilt the bottle or turn it upside down and count out the contents drop by drop.

The nominal volume of 50 ml is the amount the bottle is intended to hold under normal filling. The brimful capacity is the physical volume up to the neck, and you will find it in the parameters. The difference is a reserve for the dropper insert, which takes up part of the neck when inserted. Fill the bottle to the nominal volume, not to the brim, otherwise the contents will be pushed out when the dropper insert is pressed in.

Clear glass does not filter out light. Store blends containing essential oils, unsaturated vegetable oils or light-sensitive active ingredients in the dark or in a box, or choose amber glass instead.


Good to know

Before the first filling, wash the bottle, rinse it with isopropyl alcohol or ethanol and leave it to dry completely. Treat the cap in the same way. The dropper insert has a narrow channel that is difficult to clean inside, so if you reuse the bottle, it is better to replace the dropper insert with a new one.

Once empty, the glass bottle can be washed and used again. The dropper insert and the cap are plastic. With concentrated essential oils or blends with a higher proportion of solvents, we recommend checking that the plastic withstands long-term contact and does not change the scent of the contents.

All three components of the set are declared as suitable for contact with cosmetics. Only the glass bottle on its own has a certificate for direct contact with food; the set as a whole is intended for cosmetics.

You will find closures with the same neck type and other ready-made combinations in the Handymade range. If you put together your own combination, we recommend checking the tightness, the dispensing and the behaviour of the packaging with your specific formulation.

After use, the glass belongs in glass waste, while the plastic dropper insert and the cap are put out separately with plastics.

Test the tightness with your formulation before filling a larger quantity. Fill the bottle, close it and leave it lying on its side on a paper towel for a few hours.


Frequently asked questions

Does the clear 50 ml glass bottle protect the contents from light?
No, clear glass does not block light and the contents are fully exposed to it. It suits products that are not harmed by light, or those you store in a box or in a dark cupboard. For blends with essential oils or sensitive active ingredients, amber glass is the safer choice.
How much can be poured into the 50 ml glass bottle with a dropper insert?
You can pour in 50 ml, that is, the nominal volume, not the brimful capacity. The remainder up to the neck is a reserve for the dropper insert, which takes up part of the neck when pressed in. If you pour in more, the excess is pushed out when the dropper insert is pressed in and the outside of the packaging gets dirty.
Can the dropper insert be removed from the glass bottle and the bottle used again?
Yes, the dropper insert can be prised out of the neck, and after washing and disinfecting, the glass bottle can be filled again. The dropper insert itself is difficult to clean inside, so we recommend replacing it when you fill the bottle with new contents. The cap only needs to be washed and left to dry.
Is the glass bottle with a dropper insert suitable for water-based, alcohol-based and oil-based contents?
The glass bottle withstands water-based, alcohol-based and oil-based contents without any change to the material. The dropper insert and the cap are plastic, so for tinctures with a high alcohol content or for concentrated essential oils we recommend checking that the plastic withstands the contents over the long term. With ordinary oil blends and light serums you will usually not encounter such a limitation, but we always recommend a test with your own formulation.
Is the glass bottle with a dropper insert and a cap approved for food?
The set as a whole is intended for cosmetics. Only the glass bottle on its own has a certificate for direct contact with food; the dropper insert and the cap do not have one. If you need packaging for homemade oils or herbal infusions, use a bottle with a closure that is declared suitable for food.

Parameters

Clear glass bottle, 18 mm, 50 ml

Product colour
Clear
Country of origin
European Union
Nominal capacity
50
Brimful capacity
61 ml
Diameter
39 mm
Thread type
18/410
Height
92,9 mm
Product material
Glass

Plastic dropper for glass vials, 18 mm, short

Product colour
Clear
Country of origin
China
Diameter
14,5 mm
Thread type
18/410
Height
17,5 mm
Product material
PPPlastic

White Plastic Tamper Evident Safety Cap, 18/410

Product colour
White
Country of origin
China
Diameter
23,9 mm
Thread type
18/410
Height
23 mm
Product material
PPHDPEPlasticLDPE

Product documentation

PPWRPackaging Declaration (PPWR)
Clear glass bottle, 18 mm, 50 ml · O18SP050PDF ↓
Plastic dropper for glass vials, 18 mm, short · OVV18KKPDF ↓
PDSProduct Data Sheet
Clear glass bottle, 18 mm, 50 ml · O18SP050PDF ↓
Plastic dropper for glass vials, 18 mm, short · OVV18KKPDF ↓
White Plastic Tamper Evident Safety Cap, 18/410 · OVV18PB4PDF ↓
DrawingTechnical drawing
Clear glass bottle, 18 mm, 50 ml · O18SP050PDF ↓
White Plastic Tamper Evident Safety Cap, 18/410 · OVV18PB4PDF ↓
Download all (ZIP)

7 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.