GLASS BOTTLES 100 ml
Clear Glass Bottle, White Safety Cap & Dropper, 100 ml
Pack size5 ml10 ml12 ml15 ml30 ml50 ml100 ml
The clear glass medicine bottle, 100 ml, with a short plastic dropper insert and a white cap is a ready-made packaging solution for dropper dispensing of liquid cosmetic products. full description
Lowest price in the last 30 days: €0.95
Total for 1 pcs: €0.95
Quantities add up across all combinations of this bottle.
Add 79 more pcs and the price drops to €0.90/pc.
Product description
The clear glass medicine bottle, 100 ml, with a short plastic dropper insert and a white cap is a ready-made packaging solution for dropper dispensing of liquid cosmetic products. Clear glass shows the colour and purity of the contents, the dropper insert in the neck dispenses the contents in drops or a thin stream, and the cap with an 18/410 neck finish closes the bottle. The 100 ml volume suits facial and body oils, massage oils, oil-based serums, toners, tinctures and cleansing facial lotions, that is, low-viscosity products that are dispensed in small amounts. The set as a whole is declared as suitable for contact with cosmetics.
What the set consists of
- Glass medicine bottle, 100 ml – clear bottle with an 18/410 neck finish. A medicine bottle is the name of a shape with a narrow neck, not an indication that it is intended for medicines.
- Short plastic dropper insert, 18 mm – a polypropylene insert that is pressed into the neck and restricts the outflow of the contents to drops. Thanks to its low height, it does not reach deep into the bottle.
- White smooth cap 18/410 – a plastic screw closure that is tightened over the dropper insert and holds it in place.
What it is suitable for
Dropper dispensing proves its worth wherever you need to measure a few drops or apply a small amount directly to the palm: with oil serums, blends of carrier and essential oils, beard oil, cuticle oil or hair oils for the ends. It also works for water-based and alcohol-based products, such as toners, tinctures or facial lotions, where a wide neck would lead to spills.
Clear glass does not protect the contents from light. For oils prone to oxidation and for products containing vitamin C or light-sensitive essential oils, you should therefore allow for a shorter period of use, or store the bottle away from direct light. If you want to protect the contents from light, choose an amber or blue glass medicine bottle.
The dropper insert works best with liquid and thin consistencies. Thick serums with a gel texture or creamy emulsions would flow through the dropper insert slowly or not at all; a pump or a wider neck is more suitable for them.
Nominal volume and brimful volume
The bottle has a nominal volume of 100 ml, which is the amount it is designed for in normal filling. The physical volume up to the rim of the neck is larger, and you will find it in the parameters as the brimful volume. The difference between the two values is a reserve for the dropper insert, which takes up part of the space once pressed into the neck, and for the expansion of the contents when the temperature changes. The bottle should therefore be filled up to the nominal volume, not up to the brim. Otherwise the contents will overflow through the neck when the dropper insert is fitted, and the dropper insert will not seat correctly.
Good to know
Before the first filling, we recommend washing the bottle, dropper insert and cap, disinfecting them with isopropyl alcohol or ethanol and letting them dry completely. Residual water in the neck or in the dropper insert would introduce moisture into an anhydrous oil-based product.
After filling, the dropper insert is pressed into the neck with even pressure so that its rim sits on the mouth of the bottle. The cap is then screwed on over the dropper insert and tightens it. Before dispatch or transport, check that the set seals properly with your specific formulation. Alcohol-based and water-based products have a lower viscosity than oils, and any leak shows up sooner with them.
For products with a high proportion of essential oils or with solvents, we recommend checking the compatibility of the plastic dropper insert and cap with the contents on a single piece before you fill the whole batch.
Only the glass bottle on its own has a certificate for direct food contact. The dropper insert and cap do not have it, so the set as a whole is intended for cosmetic products, not for homemade oils, syrups or infusions for consumption.
After thorough cleaning and disinfection, the glass bottle can be refilled. Once removed from the neck, the dropper insert may no longer sit as tightly, so we recommend replacing it with a new one for the next filling. Glass belongs with glass and plastic parts with plastics; before disposal, it is enough to take the set apart.
You will find closures with the same neck type as well as ready-made combinations of medicine bottles with other closures in the Handymade range. If you make your own combination, we recommend checking the seal, the dispensing and the behaviour of the packaging with your specific formulation.
Frequently asked questions
Parameters
Glass bottle, vial, clear 100 ml
- Product colour
- Clear
- Country of origin
- European Union
- Nominal capacity
- 100
- Brimful capacity
- 108 ml
- Diameter
- 45 mm
- Thread type
- 18/410
- Height
- 116,2 mm
- Dimensions
- Ø 45 × 116,2 mm
- Product material
- Glass
Plastic dropper for glass vials, 18 mm, short
White Plastic Tamper Evident Safety Cap, 18/410
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.








































































