GLASS BOTTLES 100 ml
Amber Glass Bottle, Gold Black Spray, Smoky Overcap 100 ml
Pack size10 ml15 ml30 ml50 ml100 ml
Amber glass medicine bottle with fine mist sprayer, 100 ml A ready-made set for facial and body sprays: a medicine bottle made of amber glass with a nominal volume of 100 ml and a screw-on plastic sprayer in a black and… full description
Lowest price in the last 30 days: €1.19
Total for 1 pcs: €1.19
Quantities add up across all combinations of this bottle.
Product description
Amber glass medicine bottle with fine mist sprayer, 100 ml
A ready-made set for facial and body sprays: a medicine bottle made of amber glass with a nominal volume of 100 ml and a screw-on plastic sprayer in a black and gold glossy finish with a smoky overcap. Amber glass reduces light exposure, so the set suits contents that are sensitive to light: hydrosols, facial toners, hair sprays, refreshing body mists and alcohol-based perfumed sprays. The sprayer disperses the contents into a fine mist, so the layer is spread evenly and the product does not need to be rubbed in by hand.
The set is declared suitable for contact with cosmetic products.
What it is suitable for
- Hydrosols and floral waters – applied directly to the face as a refresher or after cleansing; dark glass helps preserve the fragrance and freshness of the contents.
- Facial toners and active sprays – water-based solutions with hyaluronic acid, panthenol or plant extracts have a low viscosity and pass through the nozzle well.
- Hair sprays – light conditioning or styling waters that are meant to be spread along the whole length of the hair.
- Body and room fragrances – alcohol-based or water-based sprays with solubilised fragrance; the black and gold sprayer with a smoky overcap turns them into a ready-made gift.
How the set works
The sprayer is mechanical: each press draws the contents up through the dip tube and releases a dose of approximately 0.14 ml. Such a small dose keeps consumption under control and the contents reach the skin in a thin layer. The dip tube reaches almost to the bottom of the medicine bottle so that most of the filling can be used; a remainder at the bottom is normal for this type of closure. The smoky overcap protects the nozzle from dust and accidental pressing in a handbag or in the bathroom.
Sprayers of this type are designed for liquid, watery contents. Thicker liquids, suspensions with undissolved particles or mixtures with a high proportion of oils may clog the nozzle or come out as a stream rather than a mist. With your own formulation, test the behaviour of the sprayer on a small sample beforehand. Also check how the plastic parts tolerate the particular formulation, especially with a high content of essential oils or alcohol.
Fill up to the nominal volume of 100 ml, not to the brim. The remaining space up to the neck is needed for the dip tube with the submerged part of the sprayer and for the contents to expand when the temperature changes.
Nominal and total volume
The nominal volume is the amount the packaging is designed for under normal filling, and it corresponds to what you state on the product. The brimful volume is the physical volume of the glass up to the neck. The difference between them is intentional: after the sprayer is screwed on, part of the space is taken up by the dip tube and the closure body, and the contents need room so that they do not push liquid out through the thread when warmed.
Good to know
- Preparation before the first filling – wash the medicine bottle with warm water, disinfect it with isopropyl alcohol or ethanol and let it dry completely. Spray clean water through the sprayer and let it drain; residual water would dilute the contents.
- Glass and heat – do not pour hot contents into the medicine bottle; hydrosols and toners are filled once they have cooled. A sudden change in temperature can damage the glass.
- Reuse – the glass can be used repeatedly; simply wash and disinfect it. With the sprayer, check that the nozzle and dip tube are not clogged with residues of the previous contents. If the fragrance or colour persists, it is better to replace the closure.
- Preservation of the contents – the sprayer limits direct contact of the hands with the contents, but it does not replace a preservative system. Water-based sprays need a preservative regardless of the type of packaging.
- Recycling – take the glass medicine bottle to glass collection. The sprayer combines PP, aluminium and other plastics, so separate it from the bottle before disposal and sort it by material.
If this closure does not suit you, you can find other closures with the same neck type and ready-made combinations in the Handymade range. With your own combination, check the tightness, the dispensing and the behaviour of the packaging with the particular formulation.
The set with the sprayer is not approved for contact with food. Only the glass medicine bottle has a certificate for direct contact with food on its own; the set as a whole is intended for cosmetics.
Frequently asked questions
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.

















































































