GLASS BOTTLES 50 ml
Amber Glass Bottle, White Tamper Evident Cap with Inner Dropper, 50 ml
Pack size5 ml10 ml15 ml30 ml50 ml100 ml
Glass bottle, vial, white cap with dropper , 50 ml is a ready-made complete set for dispensing liquid products drop by drop : facial and hair oils, oil-based serums, essential oil blends or tinctures. full description
Lowest price in the last 30 days: €0.55
Save €0.02 with this set
Total for 1 pcs: €0.55
Quantities add up across all combinations of this bottle.
Product description
Glass bottle, vial, white cap with dropper, 50 ml is a ready-made complete set for dispensing liquid products drop by drop: facial and hair oils, oil-based serums, essential oil blends or tinctures. Brown glass protects the contents from light, which is particularly appreciated for ingredients sensitive to oxidation. The dropper in the neck allows you to draw exactly as much product as you need at any given moment, without pouring and without finger contact with the contents.
The set consists of three parts that fit together without any additional adjustment: a glass vial, a transparent plastic dropper inserted into the neck and a white plastic cap that closes the bottle. The 50 ml volume is suitable for products dispensed in small amounts and consumed over a period of several weeks to months.
How to work with the set
After filling the bottle, the dropper is pressed into the neck, where it is held by its own elasticity and simultaneously narrows the outlet opening. When the bottle is tilted or turned upside down, the contents flow out drop by drop. The speed depends on the viscosity of the product: thin oils and alcoholic tinctures drip quickly, thicker oils and serums more slowly. The cap screws onto the neck thread over the dropper and closes the bottle between uses.
This dispensing method is straightforward, but does not allow drawing a larger amount at once. It is therefore suitable where the product is applied directly to the palm or skin in a few drops, not where larger doses need to be measured out.
Suitable especially for
- Facial and hair oils – drop-by-drop dispensing corresponds to the typical use of a few drops per application, and brown glass slows down light-induced changes in oils.
- Essential oil blends – glass is resistant to concentrated essential oils and the dropper enables precise dosing into a diffuser, carrier oil or bath.
- Tinctures and alcoholic extracts – glass does not react with ethanol and does not discolour the contents; the brown colour protects light-sensitive botanical ingredients.
- Oil serums and active concentrates – small packaging and dark glass are suitable for products with a higher proportion of sensitive active ingredients.
For water-based tonics or hydrolats that are applied in larger amounts, a spray bottle is more practical. The dropper set is intended for products used in small quantities.
Nominal and total volume
Nominal volume is the volume for which the bottle is designed for standard filling, and this is the basis on which the packaging is labelled and sold. Total volume to the brim is the physical volume up to the neck and is slightly larger. The difference between them is the allowance for the dropper, which submerges into the contents when inserted into the neck, and for the expansion of the liquid when the temperature changes. The bottle should therefore be filled to the nominal volume, not to the brim. The exact values of both volumes can be found in the product parameters.
When filling, leave a free space in the neck at least as long as the dropper. If the bottle is filled to the brim, pressing in the dropper will force the contents out and contaminate the thread, which impairs the cap seal.
Good to know
Contact with cosmetics and food. All three parts of the set are declared suitable for contact with cosmetic products, so the set as a whole is intended for cosmetics. A certificate for direct contact with food is held separately only by the glass bottle. The dropper and cap do not have such a declaration, so we do not recommend the set as a whole for food use.
Preparation before first filling. We recommend washing the bottle and plastic parts before use, disinfecting with isopropyl alcohol or ethanol and allowing them to dry completely. Residual water in the neck or in the dropper can spoil an anhydrous oil-based product.
Glass and heat. Glass tolerates heated contents but is sensitive to sudden temperature changes. Do not pour hot oil into a cold bottle and do not cool a filled bottle rapidly, as it may crack.
Plastic parts and concentrated substances. The dropper is made of polypropylene and the cap of polyethylene. With common cosmetic oils, serums and diluted blends, problems are rarely encountered. With undiluted essential oils, especially citrus ones, or with solvents, we recommend checking whether the plastic softens, deforms or transfers its odour to the contents after prolonged contact.
The tightness of the set depends on the dropper being properly pressed in and the cap being fully tightened. Before sending a filled product to a customer or before travelling, we recommend turning the bottle upside down and leaving it to stand for a few minutes to verify the seal.
Repeated use. The bottle can be reused after thorough washing and disinfection. The dropper may deform slightly when removed from the neck and may seal less well as a result; for repeated filling it is therefore safer to use a new one.
Label. The cylindrical shape of the vial allows a wrap-around label to be applied along the circumference.
Closures. Other closures with the same neck type, listed in the parameters, and further ready-made combinations can be found in the Handymade range. With a custom combination, we recommend verifying the seal, dispensing and behaviour of the packaging with the specific formulation.
Recycling. Once used up, the glass bottle belongs in the glass recycling bin, and the plastic dropper and cap in the plastics bin.
Frequently asked questions
Parameters
Glass bottle, vial, 18 mm, 50 ml
- Product color
- Amber
- Country of origin
- European Union
- Nominal capacity
- 50
- Brimful capacity
- 58 ml
- Diameter
- 38 mm
- Thread type
- 18/410
- Height
- 91,7 mm
- Product material
- Glass
Plastic dropper for glass vials, 18 mm, long
- Product color
- Transparent
- Country of origin
- China
- Diameter
- 14,5 mm
- Height
- 29 mm
White Plastic Tamper Evident Cap, 18/410
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.












































































