GLASS BOTTLES 50 ml
Clear Frosted Glass Bottle, Matte Black Dropper, 50 ml
The 50 ml glass bottle with dropper is designed for filling and precisely dispensing liquid cosmetic products that are applied drop by drop. full description
Lowest price in the last 30 days: €1.21
Total for 1 pcs: €1.21
Quantities add up across all combinations of this bottle.
Product description
The 50 ml glass bottle with dropper is designed for filling and precisely dispensing liquid cosmetic products that are applied drop by drop. The frosted glass softens direct light while still letting the liquid level show through, so you can see how much product is left in the bottle. The black matte dropper with a glass tube and silicone bulb draws up a small amount each time and lets you dispense drop by drop directly onto the skin or into the palm of your hand.
The set includes both the bottle and the dropper. The dropper length is matched to this bottle, and it has the same neck type. Both components are declared as suitable for contact with cosmetic products, so the bottle can be used for your own preparations as well as for products you sell. The glass can be washed repeatedly, so it also works well for formulations you switch between.
What the set is suitable for
- Face serums – water-based and oil-based serums, where a few drops are applied and an exact dose matters.
- Face and body oils – blends of vegetable oils, oil concentrates with essential oils, beard oils or cuticle oils.
- Tinctures and alcohol extracts – the dropper makes it easier to measure a small amount.
- Bath concentrates and fragrance blends – a few drops in the bath, in a diffuser or in a carrier oil.
- Small test batches – a volume of 50 ml is enough for a trial batch of a formulation before you make a larger quantity.
Volume and filling
With bottles, a distinction is made between the nominal volume and the brimful volume. The nominal volume is the amount the packaging is intended for under normal filling, and for this set it is 50 ml. The brimful volume is the physical volume of the glass up to the neck. The difference between them provides a reserve for the glass tube of the dropper, which takes up part of the space once screwed in, and for any expansion of the contents when the temperature changes.
Fill the bottle up to the nominal volume, not to the brim. If it is overfilled, the contents will overflow through the neck when the dropper is inserted and soil the thread, which then seals less well.
When filling thicker oils, use a funnel or a syringe so that the thread stays clean. Tighten the dropper by hand, without force. The thread seals properly with only light tightening, and overtightening can damage the plastic part.
Using the dropper
Squeeze the bulb before immersing the tube in the contents, then release it and let the dropper fill. When dispensing, hold the bottle upright so that the drops fall evenly. Thicker oils are drawn up more slowly and form larger drops, which you need to take into account when measuring. After use, wipe the tube so that the contents do not build up on the outside and make the thread sticky.
If your own formulation has a high proportion of essential oils or solvents, let the filled set stand for several days and check the silicone bulb and the tightness of the thread. The behaviour of the closure depends on the specific formulation, and it is worth checking in advance.
Good to know
Before the first filling, wash the bottle and the dropper, rinse them with ethanol or isopropyl alcohol and let them dry completely. Residual water in the glass would introduce moisture into an anhydrous oil. When reusing the bottle, repeat the procedure and take the dropper apart so that the inside of the tube is rinsed as well.
Frosted glass scatters light, but it does not replace dark glass. Preparations that are prone to oxidation or sensitive to light, for example those with retinol or unstable oils, are better kept in amber or blue glass, or you can store the bottle away from direct light.
Glass does not tolerate sudden temperature changes well. Do not pour hot contents into a cold bottle, and let the formulation cool to at least room temperature before filling. The set is declared as suitable for cosmetics. It is not approved for contact with food, so it is not suitable for homemade oils or syrups intended for consumption.
The bottle has an 18/410 neck finish, so it can also be used with other closures of this type from the Handymade range. If you use your own combination, check the tightness and dispensing with your specific formulation. For recycling, the glass bottle belongs in glass waste, while the dropper, which is made of plastic, glass, silicone and aluminium, should be removed and disposed of separately.
Frequently asked questions
Parameters
Glass bottle, frosted clear, 18 mm, 50 ml
Product documentation
- PPWRPackaging Declaration (PPWR)
- PDF ↓
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.
















































