GLASS BOTTLES 30 ml
Clear Glass Bottle, Glossy Golden Black Pump with Smoky Overcap, 30 ml
Pack size10 ml12 ml15 ml30 ml50 ml100 ml
The glass bottle with pump is used for filling and dispensing facial serums , cosmetic oils and light emulsions in small doses, without fingers touching the contents. full description
Lowest price in the last 30 days: €1.14
Save €0.01 with this set
Total for 1 pcs: €1.14
Quantities add up across all combinations of this bottle.
Product description
The glass bottle with pump is used for filling and dispensing facial serums, cosmetic oils and light emulsions in small doses, without fingers touching the contents. The 30 ml volume matches the usual size of concentrated products that are applied in a few drops. The clear glass shows the colour of the contents and how much is left in the bottle. The black and gold glossy pump with smoky overcap gives the finished product a coordinated look that suits both skincare and gift packaging.
What the set is suitable for
The pump works best with contents that can be drawn up and pressed out, that is, with liquid to slightly viscous products.
- Facial serums – water-based and gel serums with lower viscosity, where an exact dose matters.
- Facial and hair oils – blends of vegetable oils, oil serums for the face, beard or hair ends.
- Light emulsions – thin creams and lotions that still flow, for example daytime facial emulsions.
- Facial toners and essences – in a small volume, if you want to dispense them onto the palm instead of spraying.
Thick creams, butters and products with solid particles (scrubs) are difficult to dispense with a pump or may clog it. Jars are more suitable for these.
Filling and dispensing
The bottle is filled up to the nominal volume, not to the brim. The nominal volume is the volume the packaging is designed for under normal filling. The brimful capacity given in the parameters is the physical volume up to the neck. The difference provides a reserve for the tube and body of the pump, which push part of the contents upwards once screwed in, and for the expansion of the contents with temperature changes.
One press releases approximately 0.14 ml, which is an appropriate amount for a dose of serum or facial oil. On first use, the pump needs to be pressed several times until the tube fills and the contents start to flow out. The smoky overcap is fitted onto the pump head. It protects the opening from dust and prevents accidental pressing when the bottle is carried around.
Let emulsions and creams cool completely to room temperature before filling. Warm contents contract in a closed bottle, and the pump then draws in air during the first presses.
Good to know
Before the first filling, wash the bottle, disinfect it with isopropyl alcohol or ethanol and let it dry completely. It is enough to rinse the pump with clean water or alcohol, pump it several times and dry it. For repeated use after oil-based contents, a warm surfactant solution helps so that no greasy film remains in the tube.
Clear glass does not protect the contents from light. It is therefore suitable for products that tolerate light, or for products stored in a box or a drawer. For light-sensitive contents, for example those with a high proportion of unsaturated oils or with vitamin C, amber or blue glass is more suitable.
Suitability for contact with cosmetic products is declared for the glass bottle. No such declaration is available for the pump, so we recommend testing how the pump behaves with your specific formulation before series production, especially with a higher proportion of essential oils, alcohol or solvents. The set is not intended for contact with food.
The pump does not seal the bottle airtight, and with every press the contents come into contact with the air in the tube. Water-based products therefore need effective preservation, just as in any other packaging. Oils, in turn, need an antioxidant, if your formulation calls for one.
Do not expose the glass to sudden temperature changes and do not fill it with hot contents. The empty bottle is recycled as glass. The pump is made of plastic and aluminium, so it is separated from the glass and sorted separately.
Closures with the same neck finish given in the parameters, and other ready-made bottle + closure combinations, can be found in the Handymade range. For your own combination, we recommend checking the tightness, dispensing and behaviour of the packaging with your specific formulation.
Frequently asked questions
Parameters
Glass bottle, clear, 18 mm, 30 ml
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.























































































