+421 950 333 113info@handymade.storeHandymade Days: −10 % on all ready-made productsShop now

GLASS BOTTLES up to 10 ml

Clear Glass Bottle, Glossy Golden Black Pump with Smoky Overcap, 10 ml

Pack size10 ml12 ml15 ml30 ml50 ml100 ml

A clear glass bottle with a nominal volume of 10 ml and a plastic pump in a black and gold glossy finish together form packaging for liquid cosmetic products that are applied in doses: face serums, oils for the face or… full description

AvailabilityIn stock · 822 pcs
Product codeO18SP010-OVD18PZCL
€1.06incl. VAT

Lowest price in the last 30 days: €1.06

Volume pricing
1–199 pcs€1.06Your price
200–999 pcs€0.97−8 %
1000–4999 pcs€0.92−14 %
from 5000 pcs€0.82−23 %

Total for 1 pcs: €1.06

Quantities add up across all combinations of this bottle.

Product description

A clear glass bottle with a nominal volume of 10 ml and a plastic pump in a black and gold glossy finish together form packaging for liquid cosmetic products that are applied in doses: face serums, oils for the face or cuticles, liquid emulsions and samples of new formulations. With each press the pump releases approximately the same amount, so you do not have to guess the dose and the contents do not come into contact with your fingers.

Clear glass lets you see the contents, which helps with coloured oils or when you want to monitor how much product is left. However, it does not protect the contents from light, so this pack is better suited to formulations that are not light-sensitive. The smoky overcap covers the opening of the pump and protects it from dust and from accidental pressing in a handbag or travel pouch.


What the set is suitable for

  • Face serums – water-based and emulsion serums with a lower viscosity, where one to two doses are applied to the whole face.
  • Face, cuticle and beard oils – the pump dispenses a measured drop without the oil running down the neck of the bottle.
  • Light fluids – thinner emulsions that the pump draws up through the tube. For thicker textures, we recommend testing the dispensing first.
  • Samples and travel packs – a volume of 10 ml is enough for a customer to try out a formulation, or for several weeks of using a serum.

Dispensing and filling

One press of the pump releases approximately 0.14 ml of product, which for a full bottle corresponds to roughly seventy doses. After fitting the pump onto a filled bottle, press it several times until the tube fills and the first dose comes out in full. The narrow neck of the medicine bottle is easiest to fill with a syringe without a needle, a small funnel or a dropper.

The nominal volume is the amount the bottle is designed for in normal filling. The total volume to the brim is larger and you will find it in the product parameters. The difference between the two values is a reserve for the tube and the pump mechanism. The bottle should therefore be filled up to the nominal volume. If you fill the bottle to the neck, part of the contents will be pushed out when you screw on the pump.

Before the first filling, wash the bottle, disinfect it with isopropyl alcohol or ethanol and let it dry completely. It is enough to rinse the pump with clean water or alcohol and dry it well, so that no water remains in the tube to dilute oil-based contents.


Good to know

Suitability for contact with cosmetic products is confirmed on the basis of technical documentation for the glass bottle. No such confirmation is available for the pump, so the set as a whole is not declared for contact with cosmetics. For contents with a higher proportion of essential oils, alcohol or other solvents, we recommend testing how the pump behaves on a trial bottle before you fill the whole batch.

After washing, the glass can be reused. The pump is harder to clean after thicker or oil-based products, so before a new filling rinse it with warm water and alcohol and check that it has not become stuck. For recycling, the bottle belongs in glass; the pump is a combination of plastic and aluminium and is separated from the glass.

The bottle has a neck with a diameter of 18 mm; you will find further closures with the same type of neck, as well as ready-made combinations, in the Handymade range. If you are making your own combination, we recommend checking the tightness and dispensing with your specific formulation.

Clear glass does not block UV radiation. Store serums with vitamin C, retinol or unrefined oils prone to oxidation in the dark, or choose an amber glass bottle for them.


Frequently asked questions

Does the 10 ml glass bottle with pump protect the contents from light?
No, clear glass lets through both daylight and UV light and does not protect the contents from either. It is therefore suitable for products that are not light-sensitive, or for those that the customer stores in a cupboard or a cosmetic bag. For formulations with antioxidants and unstable active ingredients, amber glass is the safer choice.
How much product does the pump of the 10 ml glass bottle dispense per press?
One full press releases approximately 0.14 ml of product. For a face serum this corresponds to the amount for one application to the face, and for a cuticle oil one dose is enough for several nails. The actual amount depends on the viscosity of the contents and on whether the tube is completely filled.
To what level should the 10 ml glass bottle with pump be filled?
The bottle is filled up to the nominal volume of 10 ml, not to the brim of the neck. The remaining space up to the brim is a reserve for the tube and the pump mechanism. If the bottle is filled higher, the contents are pushed out when the pump is screwed on and the pump may seal less well.
Is the 10 ml glass bottle with pump suitable for thick creams?
The pump is designed for liquid and semi-liquid products such as serums, oils and light fluids. Thick creams and butters will not be drawn up through the thin tube, or will be dispensed unevenly. For emulsions of medium viscosity, we recommend testing the dispensing on one bottle before you fill the whole batch.
Is the set of the 10 ml glass bottle with pump suitable for contact with cosmetics?
Suitability for contact with cosmetic products is confirmed for the glass bottle; no such confirmation is available for the plastic pump. The set as a whole is therefore not declared for contact with cosmetics. It is advisable to check the compatibility of the pump with your specific formulation before filling a larger quantity.

Parameters

Glass bottle, vial, 18 mm, clear, 10 ml

Product colour
Clear
Country of origin
India
Nominal capacity
10
Brimful capacity
12,5 ml
Diameter
24,8 mm
Thread type
18/410
Height
58 mm
Product material
Glass

Plastic dispenser, glossy black and gold, smoke top, 18/415

Product colour
BlackGold
Country of origin
China
Diameter
22,96 mm
Thread type
18/415
Height
40,81 mm
Tube length
115 mm
Dose
0,14 ml

Product documentation

PPWRPackaging Declaration (PPWR)
Glass bottle, vial, 18 mm, clear, 10 ml · O18SP010PDF ↓
Plastic dispenser, glossy black and gold, smoke top, 18/415 · OVD18PZCLPDF ↓
PDSProduct Data Sheet
Glass bottle, vial, 18 mm, clear, 10 ml · O18SP010PDF ↓
Plastic dispenser, glossy black and gold, smoke top, 18/415 · OVD18PZCLPDF ↓
DrawingTechnical drawing
Glass bottle, vial, 18 mm, clear, 10 ml · O18SP010PDF ↓
Plastic dispenser, glossy black and gold, smoke top, 18/415 · OVD18PZCLPDF ↓
Download all (ZIP)

6 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.