+421 950 333 113info@handymade.storeHandymade Days: −10 % on all ready-made productsShop now

GLASS BOTTLES 15 ml

Clear Glass Bottle, Round, Glossy Golden Black Pump with Smoky Overcap, 12 ml

Pack size10 ml12 ml15 ml30 ml50 ml100 ml

This clear glass medicine bottle with a nominal volume of 12 ml and a fitted pump is designed for small quantities of serums, facial oils and light fluids that need to be dispensed precisely and without the contents… full description

AvailabilityIn stock · 95 pcs
Product codeO18SP012-OVD18PZCL
€1.21incl. VAT

Lowest price in the last 30 days: €1.21

Volume pricing
1–199 pcs€1.21Your price
200–999 pcs€1.14−6 %
1000–4999 pcs€1.05−13 %
from 5000 pcs€0.95−22 %

Total for 1 pcs: €1.21

Quantities add up across all combinations of this bottle.

Product description

This clear glass medicine bottle with a nominal volume of 12 ml and a fitted pump is designed for small quantities of serums, facial oils and light fluids that need to be dispensed precisely and without the contents coming into contact with fingers. The clear glass shows the colour and the remaining level of the contents, while the glossy black and gold pump with a smoky overcap gives the small bottle the look of a finished retail pack. The set is supplied as a single item, and the bottle and the pump share the same 18/415 neck finish, so they fit together without any further searching.

The small volume is suitable for samples, test batches and travel versions of products. It works equally well for more expensive active serums or oils for the eye area, of which the customer uses only a few drops a day.


What the set is suitable for

  • Oil serums and facial oils – liquid contents pass smoothly through the pump and are dispensed by the drop without spilling.
  • Water-based and hydrogel serums – with low to medium viscosity the pump works evenly; we recommend testing thicker gels beforehand.
  • Light emulsions and fluids – thin milks and fluids for the eye area or décolleté are dispensed cleanly, without taking the contents out with a finger.
  • Samples and travel packs – 12 ml is enough for several weeks of using a serum, and when testing a formulation with customers you do not use up a large amount of raw material.

Thick creams and butters do not belong in this type of pump. The pump either fails to draw them up or becomes clogged, and with a small volume a large part of the contents never comes out.


How the pump works and how to fill the bottle

The pump has a dip tube that reaches to the bottom of the bottle. One press dispenses approximately 0.14 ml. After the first fitting it is normal to press the pump head several times “dry” until the contents travel up the tube to the outlet. With thicker contents this takes longer, so we recommend testing them first.

The smoky overcap protects the pump head from dust and from accidental pressing in a bag or drawer.

The pump tube is supplied longer than the height of the bottle requires. Before the first fitting, shorten it with sharp scissors so that after screwing on it ends just above the bottom, ideally with an angled cut. The pump will then draw up even the last millilitres of the contents.

Fill the bottle slowly, using a narrow funnel or a syringe, so that the contents do not get onto the thread. A wet thread can leak after the pump is screwed on, and with oils it leaves a greasy film on the outside of the neck.


Nominal and total volume

The nominal volume of 12 ml is the amount the bottle is designed for in normal filling. The total brimful volume given in the parameters is the physical volume up to the neck. The difference between them provides a reserve for the pump tube, for the air the pump needs to work correctly, and for slight expansion of the contents with changes in temperature. The bottle is therefore filled to the nominal volume, not to the brim. If it is overfilled, the contents are pushed out through the thread when the pump is screwed on.


Good to know

Light. Clear glass does not protect the contents from UV radiation or daylight. For contents sensitive to light, such as serums with vitamin C, retinol or unstabilised vegetable oils, amber or blue glass is more suitable. If you want to stay with a clear bottle, plan to sell it in a box and recommend storage away from direct light.

The glass bottle has a declared suitability for contact with cosmetic products. No such declaration is available for the pump, so the set as a whole is not declared as suitable for contact with cosmetics. We recommend verifying the compatibility of the pump with your specific formulation by your own test. The set is not approved for contact with food.

Pump material and formulation. The pump combines plastic and aluminium. With formulations containing a high proportion of essential oils, alcohol or solvents, it is worth checking whether the plastic parts change colour, soften or start to leak over time. A simple test: leave a filled set to stand at room temperature for several weeks and check the tightness and the scent of the contents.

Preparation before first filling. Wash the bottle with warm water, disinfect it with isopropyl alcohol or ethanol and leave it to dry completely. It is enough to rinse the pump with clean water and leave it to dry. When disinfecting with alcohol, check that the alcohol has fully evaporated, including from the tube, before filling.

Reuse. The glass withstands repeated washing and disinfection. The pump can be used again if its interior is thoroughly rinsed. With oil-based contents, rinse it first with warm water containing a small amount of surfactant and then with clean water. Residues of the old formulation in the pump can cloud the new filling or accelerate its spoilage.

Recycling. The bottle goes in the glass recycling. The pump is mixed-material packaging made of plastic and aluminium; before disposal, unscrew it and dispose of it separately from the glass.

Closures with the same neck finish and other ready-made combinations of bottle and closure can be found in the Handymade range. If you are making your own combination, we recommend verifying the tightness, the dispensing and the behaviour of the packaging with your specific formulation.


Frequently asked questions

Is the 12 ml glass medicine bottle with a pump suitable for thick creams?
No, a pump of this type is designed for liquid and moderately thick contents such as serums, oils and light fluids. The pump will not draw up a thick cream, or it will become clogged after a few uses. A jar is more suitable for creams and butters.
How much does the pump of the 12 ml medicine bottle dispense per press?
The pump dispenses approximately 0.14 ml per press. With thicker contents it needs more presses after fitting before it fills and starts to dispense. The dose figure can also be used to estimate consumption: a 12 ml filling gives approximately 85 presses.
Does a clear medicine bottle protect the contents from light?
No, it does not. Clear glass lets through both daylight and UV light, so amber or blue glass is better suited to formulations with light-sensitive ingredients. A clear bottle is suitable for stable oils and serums, or for products sold in a box, where the customer sees the colour of the contents only after opening.
Why is the 12 ml medicine bottle not filled to the brim?
Because the total brimful volume is larger than the nominal 12 ml, and the difference provides a reserve for the pump tube, the air in the pump and the expansion of the contents. If it is filled to the brim, the contents are pushed out through the thread when the pump is screwed on, and the pump may not draw up correctly. It is therefore filled to the nominal volume.
Can the pump with a smoky overcap be used for an oil containing essential oils?
Yes, but it is advisable to verify compatibility beforehand. The plastic parts of the pump may change colour or tightness over time with a high proportion of essential oils or alcohol. Leave the filled set to stand at room temperature for several weeks and watch for leaking, the appearance of the plastic and the scent of the contents.
Can I wash the medicine bottle with a pump and use it again?
Yes, both the glass and the pump withstand repeated use. Wash the bottle and disinfect it with alcohol, and rinse the pump with warm water containing surfactant and then with clean water, so that no residues of the previous filling remain in it. Leave both parts to dry completely before the new filling.

Parameters

Glass bottle, vial, clear, round, 12 ml

Product colour
Clear
Country of origin
India
Nominal capacity
12
Brimful capacity
17 ml
Diameter
29 mm
Thread type
18/415
Height
61,6 mm
Product material
Glass

Plastic dispenser, glossy black and gold, smoke top, 18/415

Product colour
BlackGold
Country of origin
China
Diameter
22,96 mm
Thread type
18/415
Height
40,81 mm
Tube length
115 mm
Dose
0,14 ml

Product documentation

PPWRPackaging Declaration (PPWR)
Plastic dispenser, glossy black and gold, smoke top, 18/415 · OVD18PZCLPDF ↓
PDSProduct Data Sheet
Glass bottle, vial, clear, round, 12 ml · O18SP012PDF ↓
Plastic dispenser, glossy black and gold, smoke top, 18/415 · OVD18PZCLPDF ↓
DrawingTechnical drawing
Plastic dispenser, glossy black and gold, smoke top, 18/415 · OVD18PZCLPDF ↓
Download all (ZIP)

4 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.