GLASS BOTTLES 50 ml
Clear Glass Bottle, Glossy Golden Black Pump with Smoky Overcap, 50 ml
Pack size10 ml12 ml15 ml30 ml50 ml100 ml
The 50 ml glass bottle with pump is designed for filling serums, facial oils and light emulsions that are applied in small amounts. full description
Lowest price in the last 30 days: €1.24
Total for 1 pcs: €1.24
Quantities add up across all combinations of this bottle.
Product description
The 50 ml glass bottle with pump is designed for filling serums, facial oils and light emulsions that are applied in small amounts. Clear glass shows the colour and clarity of the contents, so it suits formulations that are not light-sensitive or that are stored out of direct sunlight. The set consists of a bottle and a black and gold glossy pump with a smoky overcap, which closes the bottle and dispenses the contents when pressed. The finished product is therefore never opened or poured, which limits contact of the contents with air and fingers.
What the set is suited for
- Facial serums – concentrated water-based and oil-based serums that are dispensed in small amounts onto the face and décolleté.
- Facial and body oils – blends of vegetable oils with lower viscosity, which the pump draws up without difficulty.
- Light emulsions and fluids – liquid creams, hydrating milks and day emulsions that are applied in a thin layer.
- Samples and travel packs – a volume of 50 ml is enough for a test batch of a formulation or for a product that customers carry with them.
Thick creams, butters and balms do not belong in this type of packaging. The pump either does not draw them up or dispenses them unevenly.
How the pump works
One press dispenses approximately 0.14 ml of the contents. This amount corresponds to one dose of serum or a few drops of oil, which makes it easier to apply concentrated products evenly and saves the contents. The pump draws up the contents through a tube from the bottom of the bottle. After filling and screwing on the pump, press the mechanism several times until the tube fills and the pump starts to dispense the product.
The smoky overcap is dark and clear, so the pump outlet remains visible. When the finished product is transported, the overcap protects the pump head from being pressed accidentally.
The pump works best with liquid and medium-thick products. For more viscous emulsions, we recommend filling one bottle as a trial and checking that the contents are drawn up smoothly and that the tube does not clog.
Nominal and total volume
The nominal volume is the amount the bottle is designed to hold when filled normally. The brimful volume is the physical volume of the glass up to the neck, and you will find it in the parameters. The difference between them leaves room for the pump tube, which takes up part of the space, and for headspace under the closure. The bottle is filled to the nominal volume. If it were filled to the neck, the contents would overflow when the pump is screwed on and the tube could kink.
Preparation before filling and reuse
Before the first filling, wash the bottle, disinfect it with isopropyl alcohol or ethanol and leave it to dry completely with the neck facing down. Residual water in the glass or in the tube would otherwise get into the product.
After it is emptied, the glass bottle can be washed and used again. Rinse the pump by pumping warm water with washing-up liquid through it several times, then clean water or ethanol, and leave it to dry. If dried product has settled in the mechanism, or if the pump dispenses the contents unevenly after rinsing, replace it with a new one.
Glass does not tolerate sudden changes in temperature well. Fill the contents once they have cooled to room temperature, not straight from the pot after emulsification, and do not fill the bottle with hot water immediately after taking it out of a cold storage room.
Good to know
- Light – clear glass does not protect the contents from light. Formulations with sensitive vegetable oils, vitamins or essential oils should be kept in this packaging in a box or out of direct sunlight. For products that need protection from light, amber or blue glass is more suitable.
- Contact with cosmetics and food – the glass bottle has a separate declaration of suitability for contact with cosmetics and for direct contact with food. The pump has a declaration of conformity with packaging legislation, and no declaration of suitability for contact with cosmetics or food is stated for it. The set as a whole is therefore not approved for contact with food and is intended for cosmetic products. We recommend checking the behaviour of the pump with your specific formulation.
- Pump materials – the mechanism combines plastic (PP) and aluminium. For formulations with a higher proportion of essential oils or with alcohol, we recommend checking the tightness and appearance of the pump after several weeks.
- Recycling – the bottle belongs with glass. Before disposal, unscrew the pump and sort it separately, as it combines plastic and aluminium.
Frequently asked questions
Parameters
Clear glass bottle, 18 mm, 50 ml
- Product colour
- Clear
- Country of origin
- European Union
- Nominal capacity
- 50
- Brimful capacity
- 61 ml
- Diameter
- 39 mm
- Thread type
- 18/410
- Height
- 92,9 mm
- Product material
- Glass
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.




















































































