GLASS BOTTLES 15 ml
Clear Glass Bottle, Glossy Golden Black Pump with Smoky Overcap, 15 ml
Pack size10 ml12 ml15 ml30 ml50 ml100 ml
A glass bottle with a pump for serums, facial oils and other liquid preparations applied in small doses. full description
Lowest price in the last 30 days: €1.07
Total for 1 pcs: €1.07
Quantities add up across all combinations of this bottle.
Product description
A glass bottle with a pump for serums, facial oils and other liquid preparations applied in small doses. The clear glass shows the colour and the amount left, while the black and gold glossy pump with a smoky overcap gives the bottle an appearance that holds up in retail and as a gift pack. The nominal volume of 15 ml suits concentrated serums with more expensive active ingredients, samples and travel packs, where an exact dose matters and the contents should be used up within a reasonable time.
How the set works
The pump with an 18/415 thread fits a bottle with an 18/410 neck finish, so the set fits together without any extra parts. One press of the head dispenses approximately 0.14 ml of product. The contents are drawn up through a dip tube from the bottom, so you do not need to tilt the bottle when dispensing.
The smoky overcap protects the head from dust and from accidental pressing in a cosmetics bag. The pump combines polypropylene and aluminium, and the bottle is made of glass.
What it is suitable for
- Facial serums – water-based and oil-based serums with lower viscosity, which are dispensed in drops and pass through the pump mechanism without resistance.
- Facial and hair oils – blends of vegetable oils, cuticle oils or oils for the ends of the hair. The small volume suits products that are used up slowly.
- Light fluids and emulsions – liquid milks and fluids. With these, it is worth checking that the pump draws them evenly.
- Samples and travel packs – trial doses of your own formulations or a portion decanted from a larger pack for travelling.
Thick creams, butters and preparations with solid particles, such as scrubs, are not suitable for the pump. The mechanism will not draw them up or it will clog.
Volume and filling
The nominal volume is the amount the bottle is designed for under normal filling. The brimful capacity is the physical volume of the glass up to the neck. The difference between them is a reserve for the dip tube and the body of the pump and for the expansion of the contents when the temperature changes. Fill the bottle up to the nominal volume, not to the brim, otherwise part of the contents will be pushed out through the thread when the pump is screwed on.
If the dip tube of the pump reaches deeper than the bottom of the bottle, shorten it with a sharp knife before fitting so that it ends just above the bottom. After filling, press the head several times without dispensing until the mechanism fills and starts to dispense regularly.
Before first use and compatibility
Clear glass does not protect the contents from light. Store preparations with light-sensitive active ingredients in a box or in the dark.
Before the first filling, wash the bottle, disinfect it with isopropyl alcohol or ethanol and leave it to dry completely. Rinse the pump by pumping clean water through it several times, then leave it to dry with the dip tube pointing down. Water residues in the mechanism would dilute the first doses of the product.
The bottle has confirmed suitability for contact with cosmetic products, and the declaration is available with the product. This declaration is not available for the pump. The set is not approved for contact with food.
The pump does not have a declaration of suitability for contact with cosmetics. Before larger-scale filling, therefore, fill a trial quantity and after a few days check the tightness, the regularity of the dose and the appearance of the head.
After washing and disinfection, the glass bottle can be used repeatedly. Rinse the pump thoroughly before the next filling and check that it draws up the product and does not leak anywhere. Dried oil residues in the mechanism reduce the dose or block it. Glass belongs in the glass recycling bin. The pump is a combination of plastic and aluminium, so separate it from the bottle before disposal.
The bottle can also be combined with other closures that have a suitable neck type, which is stated in the parameters. You can find ready-made combinations of bottle and closure in the Handymade range. When making your own combination, check the tightness, the dispensing and the behaviour of the packaging with your specific formulation.
Frequently asked questions
Parameters
Clear glass bottle, 18 mm, 15 ml
Product documentation
- PPWRPackaging Declaration (PPWR)
- PDF ↓
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.























































































