GLASS BOTTLES 100 ml
Clear Glass Bottle, Glossy Golden Black Pump with Smoky Overcap, 100 ml
Pack size10 ml12 ml15 ml30 ml50 ml100 ml
The glass bottle with pump, 100 ml , is designed for serums, light emulsions and face or body lotions that are applied in small amounts and should not come into contact with fingers. full description
Lowest price in the last 30 days: €1.39
Total for 1 pcs: €1.39
Quantities add up across all combinations of this bottle.
Product description
The glass bottle with pump, 100 ml, is designed for serums, light emulsions and face or body lotions that are applied in small amounts and should not come into contact with fingers. The clear glass medicine bottle lets the colour and consistency of the contents stand out, and the black and gold glossy pump dispenses a small measured dose with each press.
The smoky overcap protects the pump head from dust and accidental pressing during transport. The bottle is made of glass, and the pump combines polypropylene with other plastic and aluminium parts.
What the set is suitable for
- Serums and fluids – a small dose per press corresponds to the amount usually applied to the face.
- Light to medium-thick emulsions – face and body lotions that flow without much resistance; the pump dispenses them without problems.
- Face oils and oil serums – with thicker oils, check that the pump draws them smoothly.
- Products shared by several users – dispensing without dipping fingers into the contents reduces the risk of contaminating the product.
Clear glass does not filter light. Protect the contents by storing the bottle away from direct sunlight, or fill it with products that are not harmed by light. Formulations with a high proportion of unstable vegetable oils or with light-sensitive active ingredients are better suited to amber or blue glass.
Filling and volume
The nominal volume of 100 ml is the amount the bottle is designed to hold when filled normally. The brimful capacity is the physical volume up to the neck, and you will find it in the parameters. The difference between the two provides a margin for the pump body with its dip tube and for the expansion of the contents when the temperature changes.
Fill the bottle only up to the nominal volume. The dip tube and the lower part of the pump take up space in the neck when fitted, and if the bottle is overfilled, the contents will overflow when you screw the pump on.
One press dispenses approximately 0.14 ml. With a full press and a normal consistency, this corresponds to a dose for a single application of serum or a small amount of lotion. With thicker products, the actual dose is usually smaller.
After fitting, the pump needs several presses without any product until the dip tube and chamber fill with the contents. The first doses are therefore often smaller or contain air, and only then does the amount settle.
Contact with cosmetics and food
A declaration of suitability for contact with cosmetic products and for direct contact with food is available only for the glass bottle on its own. No such declaration is available for the pump. The set as a whole is therefore not specified for food use, and suitability for contact with the contents is documented only for the glass part. With your own formulation, we recommend checking in a test bottle how the pump behaves with your specific formulation, and checking the tightness and function after some time.
Good to know
Before the first filling, wash the bottle, disinfect it with isopropyl alcohol or ethanol and leave it to dry completely. It is enough to rinse the pump with clean water or alcohol and pump it several times so that the solution also reaches the dip tube and chamber. Then leave it to dry.
Glass does not tolerate sudden changes in temperature. Let a hot emulsion cool to at least lukewarm before filling, so that the bottle does not crack and the heat does not damage the pump.
After washing and disinfection, the glass bottle can be reused. The pump cannot be fully disassembled, so residues of the product in the chamber may not be completely removable. When reusing it, rinse it thoroughly, and if you change the formulation, it is better to use a new one. Before recycling, separate the pump from the bottle. Glass goes into glass recycling; sort the plastic and aluminium pump according to its marking.
Replacement closures, pumps or droppers with the same neck type, as well as other ready-made bottle and closure combinations, can be found in the Handymade range. With your own combination, check the tightness and dispensing with your specific product.
Frequently asked questions
Parameters
Glass bottle, vial, clear 100 ml
- Product colour
- Clear
- Country of origin
- European Union
- Nominal capacity
- 100
- Brimful capacity
- 108 ml
- Diameter
- 45 mm
- Thread type
- 18/410
- Height
- 116,2 mm
- Dimensions
- Ø 45 × 116,2 mm
- Product material
- Glass
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.
















































































