+421 950 333 113info@handymade.storeHandymade Days: −10 % on all ready-made productsShop now

GLASS BOTTLES 15 ml

White Glass Bottle, Glossy Golden White Pump, 15 ml

Pack size10 ml15 ml30 ml100 ml

A ready-made set for serums, facial oils and light emulsions that are dispensed in small amounts. The white glass shields the contents from view and from light, so it suits formulations with more sensitive ingredients. full description

AvailabilityIn stock · 561 pcs
Product codeO18SB015-OVD18PZBL
€2.02incl. VAT

Lowest price in the last 30 days: €2.02

Volume pricing
1–279 pcs€2.02Your price
280–1119 pcs€1.85−8 % · 1× plato
1120–5039 pcs€1.72−15 % · 4× plato
from 5040 pcs€1.51−25 % · 18× plato

Total for 1 pcs: €2.02

Quantities add up across all combinations of this bottle.

Product description

A ready-made set for serums, facial oils and light emulsions that are dispensed in small amounts. The white glass shields the contents from view and from light, so it suits formulations with more sensitive ingredients. The pump in a white and gold glossy finish screws directly onto the neck of the bottle and delivers the same small dose with every press, so there is no need to guess the amount with a dropper.

The 15 ml volume matches the usual size of an eye or facial serum, a concentrate of active ingredients, or a sample you want customers to try. Both the bottle and the pump are declared as suitable for contact with cosmetic products.


What the set is suited for

  • Serums and concentrates – liquid to medium-thick water-based or gel formulations where a few doses are enough for the whole face.
  • Facial and eye oils – the oil does not spill through the pump and does not come into contact with fingers, which helps with oils prone to yellowing.
  • Light emulsions – the consistency must remain one that the pump can draw up through the tube. Thick creams and butters do not belong in this packaging.
  • Samples and travel sizes – the small volume and closed dispensing make it easier to test a new formulation with customers for the first time.

How the pump works

One press delivers approximately 0.14 ml. The pump draws the contents up from the bottom through a tube, so the bottle is held upright during application. Before first use, prime it with several presses until the tube fills.

The pump tube is supplied longer than the height of the bottle. Before fitting, trim it so that it reaches just above the bottom and does not bend. A kinked tube draws up the contents less efficiently and leaves a residue in the lower part that cannot be used up.


Nominal and total volume

The nominal volume is the amount the bottle is intended for with normal filling. The total brimful volume is the physical volume up to the neck and can be found in the parameters. The difference between them forms a reserve for the pump tube and for the expansion of the contents with changes in temperature. Therefore, fill only up to the nominal volume, not to the brim. If it is overfilled, part of the contents is pushed out through the thread when the pump is screwed on, and the closure may not seal.


Good to know

Before first filling, wash the glass, disinfect it with isopropyl alcohol or ethanol and leave it to dry completely. Rinse the pump with clean water and leave it to drain, as residual water in the tube would dilute the first dose of the product.

The pump combines plastic parts with aluminium. For formulations with a high proportion of essential oils, alcohol or solvents, we recommend testing its behaviour with the specific formulation on a single bottle before filling a larger batch. It is equally worth watching whether the product thickens after a few weeks to the point where the pump stops drawing it up.

The set is intended for cosmetic products. It is not declared for contact with food, so it should not be used for home-made oils, syrups or herbal infusions.

Glass does not tolerate sudden changes in temperature. Let the hot phase of an emulsion cool before filling and do not expose the finished product to frost. The contents expand when they freeze and the bottle may crack.

For recycling, unscrew the pump and dispose of it separately; the glass goes with glass.

You can find ready-made sets with other closures, and separate closures for the same neck type, in the Handymade range. If you make your own combination, we recommend checking the seal and dispensing with the specific formulation.


Frequently asked questions

Does a white glass medicine bottle protect the contents from light?
Yes, opaque white glass does not let light through to the contents. This helps with serums containing vitamin C, retinol or unrefined oils, which change colour and scent more quickly in light. The disadvantage is that you cannot see how much of the contents remains in the bottle. It is therefore worth keeping track by the number of doses used.
Can I fill a pump bottle with cream?
No, the pump cannot draw up thick creams and butters through the tube. It is intended for serums, oils, gels and light emulsions that flow freely. If a formulation has the consistency of a lotion, we recommend checking on a single bottle whether the dose is delivered smoothly and whether the product thickens on standing.
How much does a 15 ml medicine bottle hold?
Fill up to the nominal volume, that is 15 ml. The brimful physical volume of the bottle is larger, but this reserve is taken up by the pump tube and by space for the expansion of the contents. If it is filled right up to the neck, some of the product is pushed out when the pump is screwed on and the thread may not seal.
Is the pump suitable for oil serums?
Yes, facial oils and oil serums are a common use for this pump. The oil does not spill through the pump and the tube draws it up from the bottom, so the bottle is emptied almost completely. For oils with a high proportion of essential oils, we recommend checking whether the plastic parts of the pump change their properties after longer contact.
Can the set be washed and reused once it is empty?
Yes, the glass can – after washing and disinfecting it with ethanol or isopropyl alcohol, it is ready to be filled again. The pump can be rinsed, but residues remain in it after oil-based contents, which could affect the stability of a new water-based formulation. For a new product we recommend a new pump; the bottle can be reused.

Parameters

Glass bottle, vial, white, 15 ml

Product colour
White
Country of origin
China
Nominal capacity
15
Brimful capacity
19 ml
Diameter
29 mm
Thread type
18/410
Height
63 mm
Product material
Glass

Plastic dispenser, 18/415, glossy white and gold

Product colour
GoldWhiteClear
Country of origin
China
Diameter
22,9 mm
Thread type
18/415
Height
40,81 mm
Tube length
115 mm
Dose
0,14 ml

Product documentation

PPWRPackaging Declaration (PPWR)
Glass bottle, vial, white, 15 ml · O18SB015PDF ↓
PDSProduct Data Sheet
Glass bottle, vial, white, 15 ml · O18SB015PDF ↓
Plastic dispenser, 18/415, glossy white and gold · OVD18PZBLPDF ↓
DrawingTechnical drawing
Glass bottle, vial, white, 15 ml · O18SB015PDF ↓
Plastic dispenser, 18/415, glossy white and gold · OVD18PZBLPDF ↓
Download all (ZIP)

5 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.