Spend over €100 for discounted shipping!

+421 950 333 113info@handymade.store

GLASS BOTTLES up to 10 ml

White Glass Bottle, Glossy Silver White Dropper, 10 ml

Pack size10 ml15 ml30 ml100 ml

White glass bottle, silver dropper, 10 ml A small set for serums, facial oils and concentrated active blends that are dispensed drop by drop. full description

AvailabilityIn stock · 149 pcs
Product codeO18SB010-OVK18SL053
€1.59incl. VAT

Lowest price in the last 30 days: €1.59

Volume pricing
1–539 pcs€1.59Your price
540–1079 pcs€1.46−8 % · 1× plato
1080–5399 pcs€1.35−15 % · 2× plato
from 5400 pcs€1.19−25 % · 10× plato

Total for 1 pcs: €1.59

Quantities add up across all combinations of this bottle.

Product description

White glass bottle, silver dropper, 10 ml

A small set for serums, facial oils and concentrated active blends that are dispensed drop by drop. The white glass bottle hides the contents from view and from light, so it suits formulations with oils prone to oxidation and with active ingredients that lose effectiveness in light. The glossy silver dropper with an 18/410 neck finish closes the bottle and also dispenses the contents, so you do not need any other tool to measure a dose.

The 10 ml volume suits products that are used up quickly or used in small amounts: eye serum, cuticle oil, a facial blend with a high proportion of active ingredients, customer samples or test batches when developing a formulation. Both the bottle and the dropper are declared suitable for contact with cosmetics. The set is not intended for food.


What the set is suitable for

  • Facial oils and oil-based serums – glass does not react with oils and the opaque white wall protects sensitive oils from daylight.
  • Serums and concentrates with active ingredients – the dropper dispenses a few drops precisely, which saves the contents and the skin when using more expensive or stronger ingredients.
  • Blends of essential oils in a carrier oil – the opaque packaging and small volume suit products that are added drop by drop to a bath, massage oil or aroma diffuser.
  • Tinctures and alcohol extracts for cosmetic use – the glass tube of the dropper and the bottle withstand alcohol without any change in the appearance or scent of the contents.
  • Samples and development batches – 10 ml is enough to try out a formulation with a customer or for a stability test of several variants side by side.

How the dropper works

The dropper consists of an aluminium shell, a plastic thread with a seal, a silicone bulb and a glass tube. Squeezing the bulb and releasing it while the tube is in the contents draws the product into the tube. Gently squeezing the bulb over your palm or face then dispenses the product drop by drop.

The aluminium shell holds its shape and gives the closure strength. The glossy silver finish combines well with white glass, so the set can be included in a uniform product line without further modifications.

Screw the dropper onto the bottle, tightening it only moderately by hand. Excessive force can damage the thread or the seal, and the packaging will then leak when turned upside down.


Nominal volume and brimful volume

The bottle is filled to the nominal volume of 10 ml, not to the neck. The brimful volume is the physical space up to the neck. The difference between the two values forms a reserve into which the glass tube of the dropper is immersed after screwing on, and room for the contents to expand with temperature changes. If the bottle is filled to the brim, part of the product is pushed out when the dropper is fitted and the neck stays greasy or sticky.

A syringe without a needle or a funnel with a narrow spout has proven effective for filling the narrow neck. Fill thicker serums slowly so that air does not become trapped in the lower part of the bottle.


Good to know

Before the first filling, wash the bottle and the dropper, disinfect them with isopropyl alcohol or ethanol and let them dry completely. Disinfection also applies to the inside of the glass tube through which the product flows with every use. The glass can be reused after washing out oil residues with warm water and washing-up liquid and disinfecting again.

Allow hot blends to cool to approximately room temperature before filling. A sudden temperature change can crack the glass, and a warm product changes volume as it cools, so the measured dose does not correspond to the nominal volume.

The silicone bulb withstands common oils and alcohol. For formulations with a high proportion of pure essential oils or with solvents, we recommend first checking the behaviour of the bulb and seal in the specific formulation.

Do not leave the contents drawn into the tube of the dropper for long periods. After use, release the bulb so that the product returns to the bottle and does not dry inside the tube or at its tip.

For recycling, the bottle belongs with glass. The dropper combines aluminium, plastic, silicone and glass, so unscrew it from the bottle before disposal and sort it according to local options.

You will find closures with the same neck type and ready-made packaging + closure combinations in the Handymade range. For your own combination, we recommend checking the seal, the dispensing and the behaviour of the packaging with the specific formulation.


Frequently asked questions

Does the 10 ml white glass bottle protect the contents from light?
Yes, the opaque white glass reduces the effect of light on the contents and hides them from view. It is therefore suitable for oils prone to oxidation, serums with vitamin C or retinol, and blends with essential oils. Even so, do not keep the bottle in direct sunlight for long-term storage, because heat affects the contents as well as light.
Why is a bottle with a dropper not filled to the brim?
The bottle is filled to the nominal volume of 10 ml, because after the dropper is screwed on, the glass tube is immersed in the bottle and takes up part of the volume. The remainder up to the neck is a reserve for the tube and for the expansion of the contents with temperature changes. If the bottle is filled to the brim, the product overflows when closing and the neck stays soiled.
Yes, both the bottle and the dropper can be reused after thorough cleaning. Wash the glass with warm water and washing-up liquid, remove oil residues and disinfect with isopropyl alcohol or ethanol. Rinse the dropper through the tube in the same way and let it dry. If the bulb has softened or the seal leaks, replace the dropper with a new one.
Is the dropper suitable for essential oils and alcohol tinctures?
The glass tube and the glass bottle withstand essential oils and alcohol without problems. The silicone bulb is designed for common concentrations of essential oils in a carrier oil. For pure essential oils or blends with solvents, we recommend first checking the behaviour of the bulb and seal in the specific formulation.
What other closure fits a 10 ml glass bottle with an 18/410 neck finish?
Any closure with an 18/410 neck fits the bottle, for example a cap, sprayer or dropper in another colour. When replacing the dropper, check the length of the tube so that it reaches the bottom of the bottle and the last remnants of the product can be taken out. You will find suitable closures and ready-made combinations in the Handymade range. For your own assembly, we recommend checking the seal with the specific contents.

Parameters

Glass bottle, vial, white, 10 ml

Product colour
White
Country of origin
China
Nominal capacity
10
Brimful capacity
13 ml
Diameter
26 mm
Thread type
18/410
Height
58 mm
Product material
Glass

Glossy silver dropper, 53 mm

Product colour
SilverWhite
Country of origin
China
Thread type
18/410
Dropper length
53 mm

Product documentation

PDSProduct Data Sheet
Glass bottle, vial, white, 10 ml · O18SB010PDF ↓
Glossy silver dropper, 53 mm · OVK18SL053PDF ↓
Download all (ZIP)

2 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.