GLASS BOTTLES 30 ml
Amber Glass Bottle, Black Fine Mist Sprayer, Smoky Overcap, 30 ml
Pack size10 ml15 ml30 ml50 ml100 ml
Amber glass medicine bottle, black fine mist sprayer, smoky overcap, 30 ml The bottle made of amber glass with a black fine mist sprayer is ready-made packaging for toners, hydrosols, facial mists and other thin… full description
Lowest price in the last 30 days: €0.80
Total for 1 pcs: €0.80
Quantities add up across all combinations of this bottle.
Product description
Amber glass medicine bottle, black fine mist sprayer, smoky overcap, 30 ml
The bottle made of amber glass with a black fine mist sprayer is ready-made packaging for toners, hydrosols, facial mists and other thin cosmetic liquids that are applied by spraying. Amber glass reduces the amount of light reaching the contents, so it also suits light-sensitive products, such as hydrosols, alcohol-based toners or perfume waters. The nominal volume of 30 ml is a handbag-friendly size, convenient for travel or for a trial batch when you want to test a new recipe in a small quantity.
The sprayer has a smoky overcap, a dark clear cap that protects the nozzle from dirt and from being pressed accidentally in a bag. Both the bottle and the sprayer are declared suitable for contact with cosmetics. The glass bottle on its own also has a certificate for direct food contact, but the set as a whole is intended for cosmetic products.
Suitable uses
- Facial toners and hydrosols – the sprayer applies a thin, even layer without your fingers touching the contents.
- Alcohol-based toners, perfume waters and freshening sprays – amber glass slows down changes in fragrances caused by light.
- Hair and scalp mists – thin water-based or water-and-alcohol solutions pass through the nozzle without problems.
- Samples and travel packs – the small bottle can be refilled at any time from a larger pack.
Use and dispensing
The sprayer is mechanical, with no propellant gas. The tube is longer than the bottle and reaches all the way to the bottom, so you can use up almost all of the contents. One press releases approximately 0.12 ml.
The sprayer is designed for thin liquids. It sprays water-based solutions, hydrosols, alcohol-based mixtures and very light oils. Thicker emulsions, gels or viscous oils either do not pass through the nozzle or come out as a stream instead of a mist. If you are using your own recipe, we recommend checking how the sprayer behaves with your specific formulation before filling a whole batch.
When filling, go by the nominal volume, not by the rim of the neck. Once screwed on, the sprayer takes up part of the neck volume and the tube displaces additional contents. An overfilled bottle will overflow when you close it.
Good to know
Nominal and total volume. The nominal volume is the quantity the bottle is intended for under normal filling. The total volume to the brim is the physical volume up to the neck, and you can find it in the parameters. The difference provides a reserve for the tube and the sprayer and for the expansion of the contents when the temperature changes.
Preparation before first filling. Wash the bottle and the sprayer before use, disinfect them with isopropyl alcohol or ethanol and let them dry completely. Residual water in the tube could dilute the first doses or increase the risk of microbial contamination of contents without a preservative.
Alcohol-based and essential oil contents. Glass is resistant to alcohol and to essential oils. The sprayer is made of polypropylene. For contents with a higher proportion of essential oils or other solvents, we recommend checking the tightness and the behaviour of the nozzle with your specific formulation in advance.
Reuse. After thorough washing and disinfection, the glass bottle can be used again. After longer use, rinse the sprayer with clean water and let it dry, so that residues of the contents do not build up in the nozzle.
Other closures. Closures with the same neck type, as stated in the parameters, and ready-made combinations of the bottle with closures can be found in the Handymade range. If you are combining parts yourself, we recommend checking the tightness and dispensing with your specific formulation.
Recycling. The empty bottle belongs in glass recycling and the sprayer in plastics. Separate them before disposal.
The bottle is made of glass, so do not fill it with hot contents and protect it from sudden temperature changes. It may break if dropped on a hard surface, so we recommend carrying it in a case or protective packaging when travelling.
Frequently asked questions
Parameters
Glass bottle, vial, 18 mm, 30 ml
- Product colour
- Brown
- Country of origin
- European Union
- Nominal capacity
- 30
- Brimful capacity
- 36 ml
- Diameter
- 33 mm
- Thread type
- 18/410
- Height
- 80,2 mm
- Product material
- Glass
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.
























































































