Amber Glass Bottle, White Lotion Pump, 30 ml

Yes, the bottle is suitable for various types of liquid and lightly oily cosmetic preparations, as long as their viscosity allows smooth passage through the dispensing mechanism. For very thick or gel formulations, we recommend first testing the dosing on a small sample to verify the smoothness and precision of application.

The packaging can be reused if strict hygiene rules are observed. Before each new filling, it is necessary to thoroughly clean the bottle and the dispenser and then disinfect them with a suitable agent, for example isopropyl alcohol or ethanol. For this purpose, you can use the products IPA 99 % isopropyl alcohol or ethanol 96 % denatured plant-based. Only after complete drying and evaporation of the alcohol is the packaging ready for reuse.

Before first use, we recommend rinsing the bottle with a suitable cleaning solution, then with clean water, and allowing it to dry thoroughly. After drying, it is advisable to disinfect the inner space and the surface of the dispenser with an alcoholic solution, for example using IPA 99 % isopropyl alcohol or ethanol 96 % denatured plant-based. Allow the disinfectant to evaporate completely before filling so that it does not affect the consistency and fragrance of your formulation.

If you decide not to reuse the packaging, we recommend recycling it in accordance with the information stated in the parameter table on the product. The glass container can usually be placed in the glass collection container after removing product residues. It is advisable to separate the dispenser and plastic parts and sort them according to material type, if this is possible in the local waste collection system. Before handing over for recycling, it is advisable to roughly rinse the bottle so that no significant residues of cosmetic product remain in it.

To select suitable packaging, you can use the advanced filter located at the top of the page after clicking on the relevant packaging category. In the advanced filter you can adjust the selection according to several parameters – for example according to neck type, size, colour or material. This allows you to quickly find bottles, medicine bottles, jars or spray dispensers that will best match your formulation and the visual concept of the product.

We recommend always verifying the compatibility of the packaging with the specific formulation by testing on a small trial batch. Observe the behaviour of the product in contact with the inner surface of the glass and the plastic parts of the dispenser, the sealing performance during storage in various positions and under long-term stress, as well as the consistency and fragrance after several weeks. By following this procedure, you will gain certainty that the packaging is long-term suitable for the specific type of cosmetic preparation.