GLASS BOTTLES up to 10 ml
Amber Glass Bottle, Type B, Slim, Glossy Silver White Pump, 10 ml
A tall amber glass medicine bottle, type B , with a capacity of 10 ml and a fitted glossy white and silver pump , is packaging for small volumes of cosmetics that are dispensed in small amounts. full description
Lowest price in the last 30 days: €1.04
Total for 1 pcs: €1.04
Quantities add up across all combinations of this bottle.
Product description
A tall amber glass medicine bottle, type B, with a capacity of 10 ml and a fitted glossy white and silver pump, is packaging for small volumes of cosmetics that are dispensed in small amounts. Amber glass reduces light transmission, so it is particularly suitable for light-sensitive contents such as serums, facial oils or concentrates with active ingredients. The pump dispenses approximately the same dose with every press, the contents do not spill, and you do not need to reach into the bottle with your fingers.
The set is supplied as one piece, the glass bottle and the pump together. The packaging is declared as suitable for use with cosmetic products. The certificate for direct food contact applies only to the glass bottle on its own; the set as a whole is intended for cosmetics.
What it is suitable for
- Facial serums and oils – the small volume and dark glass suit concentrated products that are applied in a few drops and used up quickly.
- Samples and test batches – when trying a new recipe, it is enough to fill 10 ml and check how the formulation dispenses and behaves in normal use.
- Travel size – the bottle takes up little space and the pump protects the contents from spilling better than an open neck.
- Spot treatment – products for nails, cuticles or lips, where precise dispensing of a small amount is needed.
The pump handles liquid to slightly viscous contents. Thick creams and balms will not pass through it; for those, choose a jar or a different type of closure.
Nominal and total volume
The nominal volume is the amount the packaging is designed for in normal filling. The brimful volume is the physical volume up to the neck, and you will find it in the parameters. The difference between them is a reserve for the pump dip tube, which takes up part of the volume once fitted. The bottle is therefore filled up to the nominal volume, below the level of the neck. If it is overfilled, the contents are pushed out through the neck when the pump is fitted.
Before fitting the pump for the first time, shorten the dip tube so that it reaches just above the bottom of the bottle. A tube that is too long will bend and the pump will then not draw from the bottom, where the remainder of the contents stays.
Good to know
Before the first filling, wash the bottle, disinfect it and let it dry completely. The pump only needs to be rinsed and left to drain; no water may remain inside. The glass withstands repeated washing. After emptying, rinse the pump with clean water by pressing it several times and let it dry. For contents with a higher proportion of essential oils or solvents, we recommend checking that the plastic parts of the pump continue to seal properly and do not change over the long term.
One pump dose is approximately 0.14 ml. With thicker contents it may be smaller; with thin contents, check that the pump does not drip after pressing. For viscous formulations, we recommend testing the pump with your specific recipe before filling a larger batch.
Do not expose the glass to sudden changes in temperature. Fill it with contents cooled to room temperature, not with a hot oil phase straight after heating.
Closures with the same neck type as stated in the parameters, and other ready-made combinations, can be found in the Handymade range. If you are making your own combination, we recommend checking the tightness and dispensing with your specific formulation. The glass part belongs in glass recycling; the pump contains plastic and aluminium.
Frequently asked questions
Parameters
Glass bottle, vial type B, tall, 18 mm, 10 ml
- Product colour
- Brown
- Country of origin
- European Union
- Nominal capacity
- 10
- Brimful capacity
- 12 ml
- Diameter
- 24,2 mm
- Thread type
- 18/410
- Height
- 63,7 mm
- Product material
- Glass
Plastic dispenser, 18/415, white-silver, glossy
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.
























































































