+421 950 333 113info@handymade.store−10 %Shop now

GLASS BOTTLES 30 ml

Blue Glass Bottle, White Lotion Pump, 30 ml

Pack size10 ml15 ml30 ml50 ml100 ml

Eye cream, thick serum or gel cream that is applied in small amounts and should not be scooped out with the fingers needs packaging with precise dispensing. full description

AvailabilityIn stock · 463 pcs
Product codeO18SM030-OVD18PB2
€0.83incl. VAT

Lowest price in the last 30 days: €0.83

Volume pricing
1–109 pcs€0.83Your price
110–1099 pcs€0.79−4 % · 1× plato
1100–5059 pcs€0.71−15 % · 10× plato
from 5060 pcs€0.62−25 % · 46× plato

Total for 1 pcs: €0.83

Quantities add up across all combinations of this bottle.

Product description

Eye cream, thick serum or gel cream that is applied in small amounts and should not be scooped out with the fingers needs packaging with precise dispensing. A blue glass medicine bottle with a nominal volume of 30 ml and a white lotion pump is made for this. With each press the pump dispenses approximately the same amount, and the contents stay free of unnecessary contact with air. Blue glass blocks part of the light, so the contents suffer less on a bathroom shelf or dressing table than they would in a clear bottle.

The small volume suits products that are used up before they have time to age, as well as trial batches when fine-tuning a formulation. Both the bottle and the pump are declared suitable for contact with cosmetic products.


What it is suitable for

  • Eye creams and contour creams – a small dose per press corresponds to the amount applied to a smaller area of the face.
  • Thicker serums and gel creams – the lotion pump handles viscous products that would be hard to draw up with a dropper and that a fine mist sprayer could not manage.
  • Light face creams – it suits textures that can be pumped but still hold their shape on the finger.
  • Samples and test batches – when developing a formulation, it is enough to mix a small amount and immediately test how the product behaves in the packaging and during dispensing.

Filling and dispensing

Nominal volume is the volume the bottle is designed for in normal filling. The total brimful volume is the physical volume up to the neck, and you will find it in the parameters. The difference between the two is a reserve for the pump dip tube, which takes up part of the space once fitted, and for the expansion of the contents when the temperature changes. Fill to the nominal volume, not to the brim. If you fill to the brim, part of the product will be forced out through the neck when the pump is screwed on.

Before fitting the pump, check the length of the dip tube. If it presses against the bottom and bends after screwing on, shorten it with a diagonal cut so that it ends just above the bottom of the bottle. After filling, press the pump several times until the tube fills and the product starts to come out. The first doses are often smaller or contain air.

One press of the pump dispenses approximately 0.14 ml of product. Use this amount as a starting point when writing directions for use, for example “one to two doses for the whole face”, and to estimate how many applications a bottle will last.

The consistency of the product determines how the pump performs. A very thick cream is hard to pump and the dose may be incomplete. A thin serum or oil, on the other hand, may keep being pushed out of the opening even after release, or drip. We recommend checking the behaviour of your specific formulation on a small trial batch, including several days of standing.


Good to know

Before the first filling, wash the bottle in warm water with a small amount of cleaning product, rinse it thoroughly, disinfect it with isopropyl alcohol or ethanol and leave it to dry completely with the neck facing down. For the pump, it is enough to rinse it with alcohol on the outside and by pumping several times, then leave it to drain. Residual water in the packaging increases the risk of microbial contamination, even if the product is properly preserved.

Fill emulsions and creams only after they have cooled to room temperature. A sudden change in temperature can damage the glass, and hot contents can deform the plastic parts of the pump. Hot filling is not recommended for this set.

After washing and disinfection, the glass bottle can be used repeatedly. The pump is harder to rinse on the inside, so when you change the formulation, check that no residues of the previous product remain in the tube and mechanism. The pump is made of polypropylene. For products with a high proportion of essential oils or solvents, we recommend checking whether the plastic parts soften over time and whether they still seal.

You will find closures with the same neck type and ready-made bottle and closure combinations in the Handymade range. If you make your own combination, check the seal, the dispensing and the behaviour of the packaging with your specific formulation.

After use, the glass bottle is sorted as glass and the pump as plastic; separate them before disposal.


Frequently asked questions

How much product fits into a 30 ml bottle with a pump?
The bottle is designed for 30 ml of product, which is its nominal volume. Physically it holds more, and the exact total brimful volume is given in the parameters. The reserve is for the pump dip tube and the expansion of the contents, so the bottle is filled to the nominal volume. If it were filled completely, part of the contents would be forced out when the pump is screwed on.
Can the lotion pump also be used for a liquid serum or oil?
The lotion pump is designed for thicker products, and with thin liquids it may drip or keep pushing the contents out even after release. For a liquid serum with low viscosity or a pure oil, we recommend testing the behaviour on a small sample and comparing it with a dropper or a pump designed for liquid products. Gel serums and thicker emulsions are dispensed from the lotion pump without problems.
How do I prepare a glass bottle with a pump before the first filling?
Wash and rinse the bottle, disinfect it with isopropyl alcohol or ethanol and leave it to dry completely with the neck facing down. Flush the pump by pumping alcohol through it and leave it to drain. Before fitting, check the length of the tube and shorten it if necessary so that it ends just above the bottom. After filling, press the pump several times until the tube fills with the product.
Can the bottle with a pump be reused?
After washing and disinfection, the glass bottle can be refilled without limit. The pump has an internal mechanism and a tube that are harder to clean, so when you change the formulation, check that no residues of the previous product remain, or replace the pump. When reusing, also check the seal and the smoothness of pressing.
Can another closure be fitted to the blue 18 mm medicine bottle?
Yes, closures with the same neck type as stated in the parameters can be fitted to the bottle, for example a cap, a dropper or another pump. Suitable closures and ready-made sets are available in the Handymade range. If you make your own combination, we recommend checking the seal and the dispensing with your specific product, because the behaviour of a closure also depends on the consistency of the contents.

Parameters

Glass bottle, vial, blue, 18 mm, 30 ml

Product colour
Blue
Country of origin
China
Nominal capacity
30
Brimful capacity
35 ml
Diameter
33 mm
Thread type
18/410
Height
78,8 mm
Product material
Glass

Plastic cream dispenser, 18 mm, white

Product colour
WhiteClear
Country of origin
China
Diameter
22,2 mm
Thread type
18/415
Height
40,2 mm
Tube length
115 mm
Dose
0,14 ml

Product documentation

PPWRPackaging Declaration (PPWR)
Glass bottle, vial, blue, 18 mm, 30 ml · O18SM030PDF ↓
PDSProduct Data Sheet
Glass bottle, vial, blue, 18 mm, 30 ml · O18SM030PDF ↓
Plastic cream dispenser, 18 mm, white · OVD18PB2PDF ↓
DrawingTechnical drawing
Glass bottle, vial, blue, 18 mm, 30 ml · O18SM030PDF ↓
Plastic cream dispenser, 18 mm, white · OVD18PB2PDF ↓
Download all (ZIP)

5 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.