ACTIVE INGREDIENTS
Hyaluronic Acid, Vegetable, LMW, 10 - 50 kDa, 500 g
Hyaluronic acid LMW with a molecular weight of 10–50 kDa is a low-molecular-weight form of hyaluronic acid that penetrates the skin more deeply than the usual high-molecular-weight form. full description
Lowest price in the 30 days before the discount: €446.28
Product description
Hyaluronic acid LMW with a molecular weight of 10–50 kDa is a low-molecular-weight form of hyaluronic acid that penetrates the skin more deeply than the usual high-molecular-weight form. The short chains replenish moisture in the deeper layers of the skin, nourish it and help smooth fine wrinkles. A few tenths of a percent are enough in a formulation. It suits serums, creams, eye care and products for hair and scalp.
The adjective “vegetable” refers to the origin of the raw material. It is produced by the fermentation of carbohydrates from corn, wheat and sugar cane, without any ingredients of animal origin. It is vegan, gluten-free, free from palm oil derivatives and GMO-free. It is COSMOS Approved and NATRUE Approved.
How it differs from high-molecular-weight hyaluronic acid
Hyaluronic acid is a polysaccharide and its molecules differ in chain length. The longer the chain, the more water the molecule binds, but the less well it penetrates the skin. The molecular weight therefore determines how the raw material behaves on the skin and in the product.
The main difference is where it works. The high-molecular-weight form stays on the surface of the skin, where it binds water and forms a hydrating film. It tightens the skin and prevents moisture from evaporating, but it does not reach the deeper layers. The low-molecular-weight form of 10–50 kDa is absorbed deeper into the skin and delivers moisture where the film cannot reach. The skin looks plumper and fine wrinkles are less pronounced. The two forms are commonly combined in formulations: the high-molecular-weight form treats the surface, the low-molecular-weight form the deeper layers.
The texture differs as well. The high-molecular-weight form thickens an aqueous solution even at a low usage rate and creates a clear gel. The low-molecular-weight form raises viscosity only slightly, so a serum or toner made with it stays liquid. For a thicker texture, use a gelling ingredient such as Xanthan Gum or Hydroxyethylcellulose.
Key benefits
- Hydration of the deeper layers of the skin – the short chains penetrate the skin and bind water in it, so hydration does not stay only on the surface.
- Smoothing of fine wrinkles – well-hydrated skin is firmer and fine lines are less visible. It belongs in care for mature skin and the eye area.
- For all skin types – including sensitive and dry skin, it contains no known skin allergens.
- Clear solution – it dissolves in water without turbidity and does not discolour the finished product.
- For rinse-off and leave-on products – it tolerates anionic, non-ionic and amphoteric surfactants and common preservatives, and it is also suitable for shampoos and conditioners.
Use in a formulation
It belongs in the water phase. It dissolves in water, not in oils, and it is not suitable for anhydrous products. The recommended usage rate is 0.05–0.5%. In creams 0.1–0.2% is most commonly used, in masks 0.05% is enough.
Dissolving takes patience. Sprinkle the powder slowly onto the surface of the water phase and stir vigorously until it is completely dissolved. If it is slow to dissolve, a homogeniser at low speed will help. Avoid high shear forces. A simpler way: sprinkle the powder onto the surface of the water, do not stir and leave it to swell overnight, then mix. If you stir the partially swollen powder too early, slimy lumps form that take a long time to dissolve.
First work the powder into a paste with glycerine, optionally together with a gum, and only then mix this blend into the water or the finished emulsion. The granules separate and do not clump together. Leave the mixture to swell for several minutes before the next step.
The processing temperature is below 40 °C. It is added to the emulsion in the cool-down phase together with other sensitive ingredients, and in cold-process production as a pre-prepared aqueous solution. The finished product should have a pH of 5–8; the raw material tolerates acidic and neutral environments. Do not combine it with strong acids, strong alkalis or oxidising agents.
Every aqueous product containing hyaluronic acid needs a preservative. The raw material is compatible with common preservatives. In formulations it is most often combined with Glycerin, Xanthan Gum and Carrageenan, and in emulsions with Cetearyl Alcohol and Glyceryl Stearate.
Suitable for products such as
- hydrating serums and toners – on its own or in combination with high-molecular-weight hyaluronic acid, which adds surface hydration,
- face creams and lotions – added to the cooled emulsion,
- eye creams and serums – for the eye area and fine lines,
- hydrating face masks – even at the lowest usage rate,
- body lotions and creams – for dry and tight skin on the body,
- shampoos, conditioners and scalp serums – it tolerates surfactants and works in rinse-off and leave-on hair products.
Good to know
Hyaluronic acid is a humectant, meaning it binds water but cannot retain it in the skin for long by itself. In a cream or lotion the oil phase takes care of this. In a toner or water-based serum without an oil component, hydration lasts a shorter time, which you need to take into account when composing the formulation.
It is not classified as hazardous under CLP and does not require a safety data sheet.
When weighing, do not inhale the powder and avoid raising dust. Fine dust is flammable and a static discharge may cause a dust explosion. Work in a well-ventilated area, away from sources of sparks.
Frequently asked questions
Parameters
- INCI
- Sodium Hyaluronate
- CAS No.
- 9067-32-7
- EC number
- 618-620-0
- Product colour
- White
- Country of origin
- China
- Grade
- Cosmetic grade
- Processing method
- Fermentation
- Appearance
- Powder
- Formulation phase
- Water phase
- Function in formulation
- Active ingredientHumectant
- Recommended processing temperature
- < 40 °C
- Recommended usage rate
- 0,05 – 0,5 %
- Recommended formulation pH range
- 5 – 8
- Solubility
- Water-soluble
- Biodegradability
- Readily biodegradable
- Suitable for
- Sensitive skinDry skinMature skinAll skin types
- Manufacturer's certificate
- COSMOS ApprovedNATRUE Approved
- Natural Index (NI ISO 16128)
- 0,00
- Natural Origin Index (NOI ISO 16128)
- 1,00
Product documentation
Learn how to work with it
From our blogVariant: Kyselina hyalurónová, rastlinná, LMW, 10 - 50 kDa, 5 g




























