PLASTIC BOTTLES
Plastic bottle, clear, matte white flip-top, 150 ml
Pack size100 ml150 ml200 ml250 ml500 ml
A clear 150 ml PET bottle paired with a matte white flip-top cap is a container for liquid and medium-viscosity cosmetic products dispensed in small amounts directly into the palm. full description
Lowest price in the last 30 days: €0.81
Total for 1 pcs: €0.81
Quantities add up across all combinations of this bottle.
Product description
A clear 150 ml PET bottle paired with a matte white flip-top cap is a container for liquid and medium-viscosity cosmetic products dispensed in small amounts directly into the palm. It is particularly suited for shampoos, shower gels, liquid soaps, conditioners, body lotions, and massage oils. The plastic is lightweight and will not shatter if dropped, making the bottle suitable for the bathroom, shower, and travel, where glass would be impractical.
The clear material reveals the colour, consistency, and remaining amount of the contents. The cap opens and closes with one hand and stays attached to the bottle, so it cannot be lost during use. The set is declared as suitable for contact with cosmetic products.
How to dispense from the bottle
The flip-top cap has a small dispensing opening that closes by snapping the flip part shut. The contents are dispensed by tilting the bottle and gently squeezing its sides. How accurately the dose can be judged depends on the consistency of the product.
- Liquid to medium-viscosity textures – shampoos, shower gels, liquid soaps, and body lotions flow through the opening smoothly, and the dose is easy to gauge.
- Oils – massage, body, or cleansing oils are dispensed in drops to a thin stream depending on how firmly the bottle is squeezed.
- Very thin liquids – tonics and water-based solutions flow out quickly; a pump or spray bottle is more practical for these.
- Thick creams and butters – these pass through the small opening only with considerable effort and are better suited to a jar.
Nominal and total volume
Nominal volume is the amount the bottle is intended to hold under normal filling. Total brim volume is the physical capacity up to the neck and is somewhat larger. The difference provides headspace for the cap and for expansion of the contents with temperature changes. Both values are listed in the product specifications.
What to know before filling
Before first filling, it is recommended to wash the bottle and cap, disinfect with isopropyl alcohol or ethanol and allow to dry completely. Residual water in the packaging unnecessarily burdens the product's preservative system. For the cap, pay particular attention to the dispensing opening and the inner surface of the flip-top section, where residues tend to linger the longest.
Keep the bottle away from heat, which may cause deformation. Products prepared hot should only be filled in once cooled, and the bottle should not be boiled.
Do not expose the bottle to aggressive chemicals. It is intended for finished cosmetic products, not for concentrated raw materials or solvents.
You can find more closures with the same neck finish, as well as ready-made combinations, in the Handymade range. If you are creating your own combination, we recommend checking the tightness, dispensing and behaviour of the packaging with your specific formulation.
Frequently asked questions
Parameters
Plastic bottle, clear 24/410, 150 ml
Plastic cap, 24/410, matte white flip-top
- Product colour
- White
- Country of origin
- European Union
- Diameter
- 27 mm
- Thread type
- 24/410
- Height
- 21,4 mm
Product documentation
- PPWRPackaging Declaration (PPWR)
- PDF ↓
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.































































