GLASS BOTTLES 15 ml
White Glass Bottle, Black Lotion Pump with Black Overcap, 15 ml
Pack size10 ml15 ml30 ml100 ml
The white glass medicine bottle with lotion pump is a ready-made packaging and pump set for small packs of creams, serums and gels, where precise dispensing matters and the contents should not come into contact with… full description
Lowest price in the last 30 days: €1.64
Total for 1 pcs: €1.64
Quantities add up across all combinations of this bottle.
Product description
The white glass medicine bottle with lotion pump is a ready-made packaging and pump set for small packs of creams, serums and gels, where precise dispensing matters and the contents should not come into contact with fingers. The white glass is opaque and limits the amount of light reaching the contents, which suits formulations with light-sensitive active ingredients. The black plastic lotion pump dispenses 0.14 ml per press, so it is easy to take a small amount, for example with eye creams or concentrated serums. The whole set is declared suitable for contact with cosmetics.
What the set is suitable for
- Eye creams and contour creams – the small dose corresponds to the amount normally applied to this area.
- Serums and concentrates – the 15 ml size suits more expensive active formulations that are used up before they have time to degrade.
- Light creams and gel creams – the pump dispenses emulsions of thinner to medium-thick consistency.
- Samples and travel sizes – a trial size for customers, or for testing a new formulation before larger production.
- Facial oils and oil serums – glass does not react with the oil phase and the pump also copes with oil-based formulations.
The pump will not draw up very thick balms, ointments or products with a high proportion of waxes. Check the specific consistency on a single piece before you fill the whole batch.
Nominal volume and brimful volume
The bottle has a nominal volume of 15 ml. This is the amount the packaging is designed for in normal filling. The brimful volume, that is the physical volume up to the neck, is larger. The difference provides room for the dip tube and the body of the pump, and for the expansion of the contents when the temperature changes. You should therefore fill it up to the nominal volume, not to the brim. If you fill up to the neck, part of the contents will be pushed out when the pump is screwed on.
The dip tube of the pump is longer than the height of the bottle. Shorten it with a straight cut so that it ends just above the bottom. The pump will then draw up almost all of the contents and no unnecessary residue is left in the bottle.
Using the pump
The lotion pump is screwed onto the neck of the bottle and pressed several times before first use, until the tube fills and the pump starts to dispense the contents. The dose per press is 0.14 ml, which helps when estimating consumption and when writing instructions for the customer (for example “one to two presses for the whole face”). The contents do not come into contact with fingers when dispensed, which reduces the risk of introducing microorganisms into the product during use. Preservation of the formulation is nevertheless necessary for every product containing a water phase.
Good to know
- Preparation before filling – wash the bottle, disinfect it with isopropyl alcohol or ethanol and let it dry completely. Rinse the pump with clean water, spray it with alcohol and let it dry, including the tube.
- Filling temperature – the finished, cooled formulation is filled into glass. A hot emulsion can damage the glass because of the sudden change in temperature.
- Reuse – after thorough washing, the glass bottle can be used again. When you change the formulation, it is better to replace the pump, because the inside of the tube and the mechanism are difficult to clean and residues of the previous product remain in them.
- Essential oils and solvents – glass is resistant to them. With the plastic pump, check how it behaves with formulations containing a higher proportion of essential oils or alcohol.
- Choosing a different closure – closures with the same neck type fit the bottle. You can find ready-made combinations of the bottle with other closures in the Handymade range. If you make your own combination, check the tightness, the dispensing and the behaviour of the packaging with the specific formulation.
- Recycling – unscrew the pump before disposal. The bottle belongs in glass waste, the pump in plastics.
Store and transport the set with the pump upright. If it is laid on its side, or if pressure is applied to the pump head in a bag or parcel, part of the contents may be pushed out, so use protective packaging when shipping.
Frequently asked questions
Parameters
Glass bottle, vial, white, 15 ml
Black plastic cream pump 18 mm, black top
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.























































































