+421 950 333 113info@handymade.storeHandymade Days: −10 % on all ready-made productsShop now

GLASS BOTTLES 15 ml

White Glass Bottle, Lotion Pump, 15 ml

Pack size10 ml15 ml30 ml100 ml

The white glass medicine bottle with a volume of 15 ml and a plastic lotion pump make up a complete set for small quantities of thicker preparations. full description

AvailabilityIn stock · 561 pcs
Product codeO18SB015-OVD18PC2
€1.64incl. VAT

Lowest price in the last 30 days: €1.64

Volume pricing
1–279 pcs€1.64Your price
280–1119 pcs€1.50−8 % · 1× plato
1120–5039 pcs€1.39−15 % · 4× plato
from 5040 pcs€1.23−25 % · 18× plato

Total for 1 pcs: €1.64

Quantities add up across all combinations of this bottle.

Product description

The white glass medicine bottle with a volume of 15 ml and a plastic lotion pump make up a complete set for small quantities of thicker preparations. White glass is opaque, so it hides the contents from view and limits the amount of light that reaches them. The pump dispenses the contents in small doses, so you do not need to reach into the bottle with your fingers or a spatula. It is suitable for eye creams, concentrated serums, gels, travel-size face creams, samples for customers or testers of a new formulation. The set is declared suitable for contact with cosmetic products.


What it is suitable for

  • Eye and face creams – one pump delivers a small dose, which corresponds to the amount applied around the eyes or to the face.
  • Thicker serums and gels – the lotion pump handles viscous textures that would come out of a dropper with difficulty and would not work at all in a sprayer.
  • Samples and travel sizes – 15 ml is enough for a trip or for trying out a formulation, and the set can be refilled repeatedly.
  • Light-sensitive preparations – formulations with vitamins, plant extracts or essential oils, where you want to limit the amount of light reaching the contents.

How the set works

The bottle has the shape of a classic medicine bottle, and thick cream is easiest to fill into it from a bag with a corner cut off. The pump screws directly onto the neck. The dip tube is longer than the bottle, so it needs to be shortened before first use. One pump releases approximately 0.12 ml of the preparation. A dose this small suits eye creams and concentrated serums; for a face cream applied to the whole face, you press the pump several times.

The black pump is made of polypropylene (PP) and can be rinsed and used again. On first use, the pump needs to be pressed several times without dispensing until the tube fills and the contents start to be released evenly.

Shorten the tube with a sharp knife so that it ends just above the bottom of the bottle. A straight-cut end lets the tube draw up the contents right down to the last doses.

The lotion pump is designed for thick textures. With very thin liquids, for example toners or water-based serums, we recommend first checking that the pump dispenses the contents evenly and does not drip.


Nominal and total volume

The nominal volume of 15 ml is the quantity the bottle is designed to hold when filled normally. The total brimful volume, given in the parameters, is the physical volume up to the neck. The difference between them is a reserve for the pump with its tube and for the expansion of the contents when the temperature changes. Therefore, fill only up to the nominal volume and leave the space above it free. If the bottle is overfilled, the contents are pushed out through the neck when the pump is screwed on and soil the thread.


Good to know

Before first filling, wash the bottle and the pump, disinfect them with isopropyl alcohol or ethanol and leave them to dry completely. Residual water in the tube would dilute the first doses and could affect the stability of anhydrous preparations.

The set can be used repeatedly. After it is emptied, rinse the pump with warm water – with a small amount of washing-up liquid for oily and greasy contents – and leave it to dry. The glass withstands hot water; do not boil the plastic pump.

For formulations with a higher proportion of essential oils or with solvents, we recommend testing how the plastic parts of the pump behave in contact with the specific formulation. The glass is resistant to these ingredients; polypropylene may change in appearance or flexibility during long-term contact with some substances.

Closures with the same neck type as stated in the parameters, and other ready-made combinations, can be found in the Handymade range. For your own combination, we recommend checking the tightness and dispensing with the specific formulation. At the end of its life, the glass belongs in glass recycling and the pump in plastics recycling.


Frequently asked questions

Does the 15 ml white glass medicine bottle protect the contents from light?
White glass is opaque, so the contents cannot be seen and considerably less light reaches them than through clear glass. It is therefore suitable for creams and serums with vitamins, plant extracts or essential oils, which change colour or scent in the light. The disadvantage is that you cannot see how much of the preparation is left in the bottle. The quantity can be estimated from the weight or from how the pump feels when pressed.
How much cream does the lotion pump dispense per press?
One full press of the pump releases approximately 0.12 ml of the preparation. This quantity corresponds to a usual dose of eye cream or concentrated serum. For a face cream applied to the whole face, the pump is pressed several times as needed. The first presses after filling dispense nothing until the contents are drawn up into the tube.
How do I fill the 15 ml glass medicine bottle with a lotion pump correctly?
The bottle is filled up to the nominal volume of 15 ml and the space above it is left free. This reserve is for the pump tube and for the expansion of the contents. If the bottle is overfilled, the contents are pushed out through the neck when the pump is screwed on. Thick cream is easiest to fill from a bag with a corner cut off.
Is the lotion pump also suitable for oils and thin serums?
The lotion pump is designed for thick textures such as creams, gels and viscous serums. Pure oils and watery serums can be dispensed, but with thin liquids there is a risk of dripping from the pump head and uneven doses. A dropper is more suitable for these contents. Before filling, we recommend testing how the pump behaves with your specific formulation.
Can the bottle with a lotion pump be washed and used again?
Yes, the set is intended for repeated use. Rinse the pump and the tube with warm water and washing-up liquid and leave them to dry. The glass bottle can be washed in hot water and disinfected with ethanol or isopropyl alcohol before refilling. Do not boil the plastic pump.

Parameters

Glass bottle, vial, white, 15 ml

Product colour
White
Country of origin
China
Nominal capacity
15
Brimful capacity
19 ml
Diameter
29 mm
Thread type
18/410
Height
63 mm
Product material
Glass

Plastic cream dispenser 18 mm, black

Product colour
BlackClear
Country of origin
China
Diameter
22,3 mm
Thread type
18/415
Height
40,01 mm
Tube length
115 mm
Dose
0,12 ml

Product documentation

PPWRPackaging Declaration (PPWR)
Glass bottle, vial, white, 15 ml · O18SB015PDF ↓
Plastic cream dispenser 18 mm, black · OVD18PC2PDF ↓
PDSProduct Data Sheet
Glass bottle, vial, white, 15 ml · O18SB015PDF ↓
Plastic cream dispenser 18 mm, black · OVD18PC2PDF ↓
DrawingTechnical drawing
Glass bottle, vial, white, 15 ml · O18SB015PDF ↓
Plastic cream dispenser 18 mm, black · OVD18PC2PDF ↓
Download all (ZIP)

6 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.