+421 950 333 113info@handymade.store−10 %Shop now

GLASS BOTTLES 30 ml

Amber Matte Glass Bottle, Black Lotion Pump with Black Overcap, 30 ml

Amber matte glass medicine bottle with a volume of 30 ml and a black lotion pump that dispenses the contents in individual doses. full description

AvailabilityPre-order
Product codeO18SA030-OVD18PC3
€0.90incl. VAT

Lowest price in the last 30 days: €0.90

Expected back in stock: 25 Nov.This variant is currently out of stock — your order will be a pre-order and delivery may take longer.
Volume pricing
1–199 pcs€0.90Your price
200–999 pcs€0.86−4 %
1000–4999 pcs€0.80−12 %
from 5000 pcs€0.72−20 %

Total for 1 pcs: €0.90

Quantities add up across all combinations of this bottle.

Product description

Amber matte glass medicine bottle with a volume of 30 ml and a black lotion pump that dispenses the contents in individual doses. The set is suitable for face and eye creams, thicker serums and light emulsions, where you want to measure out each dose without scooping it with your fingers. The amber glass protects the contents from light, which you will appreciate especially with formulations containing vegetable oils, vitamins and other light-sensitive ingredients. Both the bottle and the pump are declared suitable for contact with cosmetic products.


What it is suitable for

  • Face and eye creams – a volume of 30 ml corresponds to several weeks of use, and the cream does not come into contact with your fingers at each application, unlike in a jar.
  • Thicker serums and concentrates – the pump dispenses approximately the same amount each time, so it is easier to keep the dosage of active ingredients consistent.
  • Light emulsions and facial milks – with more fluid formulations, test whether the pump drips after pressing. The suitability depends on the viscosity of the particular formulation.
  • Trial batches and samples – the small volume allows you to divide one formulation into several bottles and monitor its stability without using up a lot of raw materials.

Dispensing and filling

One press of the pump releases approximately 0.14 ml of the contents. Two to three doses are usually enough for facial care, and one for an eye cream. The pump draws the contents up through a tube from the bottom of the bottle, so press it several times before first use until the tube fills.

The bottle has a nominal volume of 30 ml. The nominal volume is the amount the packaging is intended for under normal filling. The brimful capacity listed in the parameters is the physical volume up to the neck. The difference between the two provides room for the pump tube and for the expansion of the contents when the temperature changes. Fill it up to the nominal volume, never to the brim, otherwise the contents will overflow when you screw on the pump.

Fill creams and emulsions into the bottle only when they have cooled completely. A warm mass changes in volume as it cools, and thicker formulations may then be difficult to draw up through the tube.


Good to know

Before first filling, wash the bottle, disinfect it with isopropyl alcohol or ethanol and leave it to dry completely. Treat the pump in the same way: rinse it with clean water, spray it with alcohol and leave it to drain with the tube pointing downwards. Any residual water inside would mix with the first doses of cream.

Glass does not tolerate sudden changes in temperature. Do not heat the bottle with its contents and do not pour a hot mass into it. The pump is made of polypropylene; for formulations with a high proportion of essential oils, we recommend checking the tightness and function of the pump after some time.

The lotion pump is not an airless system. The remainder of the contents at the bottom, which the tube can no longer draw up, can be used after unscrewing the pump. The set is intended for cosmetics and is not approved for contact with food.

Very thick butters and balms that solidify at room temperature will not pass through a lotion pump. A jar or container is more suitable for them.

After cleaning, the bottle can be used repeatedly. Rinse the pump with warm water until clean water comes out of it, then spray it with ethanol and leave it to dry. If it does not draw up the contents or sticks after cleaning, replace it with a new one for the next filling. When recycling, separate the glass and the plastic pump, as they belong to different material groups.


Frequently asked questions

Does the amber glass bottle protect the contents from light?
Yes, amber glass blocks a large part of the light that would otherwise act on the contents. Creams with vegetable oils, vitamins or plant extracts keep their colour and scent unchanged for longer in it than in clear packaging. However, protection from light does not replace a preservative system or an antioxidant in water-based formulations.
How much cream does one press of the lotion pump dispense?
One press releases approximately 0.14 ml of the contents. Two to three doses are therefore enough for ordinary facial care, and one for the eye area. The amount varies slightly with the thickness of the formulation, so with a new formulation check the first few doses and adjust the directions for use if necessary.
Why is the bottle with a lotion pump not filled to the brim?
It is filled up to the nominal volume of 30 ml, because the rest of the space up to the neck is taken up by the pump tube and serves as room for the contents to expand. A bottle filled to the brim would overflow when the pump is screwed on, and the contents would get into the thread, where they reduce the tightness and are harder to clean.
Is the lotion pump also suitable for liquid serums or oils?
The lotion pump is not intended for thin liquids. Its design is adapted to creams and emulsions, and with oils and watery serums it may drip after pressing or dispense unevenly. A bottle with a dropper or a fine mist sprayer is more suitable for liquid formulations, and you will find these in the Handymade range for the same neck finish.
Is the glass bottle with a lotion pump suitable for food?
No, the set of bottle and lotion pump is not approved for contact with food. Both the bottle and the pump are declared suitable for use with cosmetic products, that is, creams, emulsions and serums. For homemade oils, syrups or herbal infusions, choose packaging from the range that has a food-contact certificate stated in its parameters.

Parameters

Glass bottle, matte brown, 18 mm, 30 ml

Product colour
Brown
Country of origin
India
Nominal capacity
30
Brimful capacity
35 ml
Diameter
33 mm
Thread type
18/410
Height
78,8 mm
Product material
Glass

Black plastic cream pump 18 mm, black top

Product colour
Black
Country of origin
China
Diameter
22,1 mm
Thread type
18/415
Height
40,01 mm
Tube length
115 mm
Dose
0,14 ml

Product documentation

PPWRPackaging Declaration (PPWR)
Glass bottle, matte brown, 18 mm, 30 ml · O18SA030PDF ↓
Black plastic cream pump 18 mm, black top · OVD18PC3PDF ↓
PDSProduct Data Sheet
Glass bottle, matte brown, 18 mm, 30 ml · O18SA030PDF ↓
Black plastic cream pump 18 mm, black top · OVD18PC3PDF ↓
DrawingTechnical drawing
Glass bottle, matte brown, 18 mm, 30 ml · O18SA030PDF ↓
Black plastic cream pump 18 mm, black top · OVD18PC3PDF ↓
Download all (ZIP)

6 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.