Before first use, we recommend thoroughly cleaning and disinfecting the bottle and all parts of the spray pump. After mechanical washing with a suitable cleaning agent, allow the packaging to be rinsed and to dry. Then carry out disinfection using a suitable alcohol, for example IPA 99 % isopropyl alcohol or ethanol 96 % denatured, plant-based. Allow the disinfectant solution to act briefly, pour out the remainder and leave the packaging to dry naturally at room temperature.

The packaging can be reused, provided hygiene principles are observed, for the same type of product or similar formulations. Before each new filling, the bottle and the spray pump must be thoroughly cleaned and then disinfected, ideally using the products IPA 99 % isopropyl alcohol or ethanol 96 % denatured, plant-based. This reduces the risk of microbial contamination and cross-contamination between individual refills. When changing the type of product (for example from an oil-based to an aqueous solution), we recommend more thorough cleaning and considering the use of new packaging.

For stable spraying it is important to choose a formulation with suitable viscosity and without coarse particles that could clog the nozzle. After filling, do not overfill the bottle up to the rim so that there is space left for air and for the proper function of the piston mechanism. Before each use, gently shake the packaging, especially for blends containing an oil fraction or suspended components. If the nozzle becomes clogged over time, you can carefully flush it with warm water or a suitable solvent compatible with your formulation and then allow it to dry.

If you decide not to reuse the packaging, we recommend recycling it according to the material type indicated in the parameter table for the product. Before handing it over for separate collection, it is advisable to empty the bottle and the spray pump and remove remaining product as much as possible. Then separate the components according to the material (for example plastic bottle and separate plastic-metal spray pump, if possible) and place them in the appropriate collection containers according to local waste-sorting rules. By following these principles, you support efficient recycling and minimise environmental burden.

To select suitable packaging, we recommend using the extended filter, which you will find at the top of the page after clicking on the relevant packaging category. In the extended filter you can conveniently filter according to parameters such as neck type and size, overall size of the packaging, colour and material used. This allows you to quickly narrow down the range to packaging that best suits your formulation, method of dosing and the visual style of your brand.