+421 950 333 113info@handymade.storeHandymade Days: −10 % on all ready-made productsShop now

GLASS BOTTLES 50 ml

Blue Glass Bottle, Glossy Gold Black Spray, Smoky Overcap, 50 ml

Pack size10 ml15 ml30 ml50 ml100 ml

This glass bottle with a fine mist sprayer, 50 ml , is intended for filling liquid cosmetic products that are applied by spraying. full description

AvailabilityIn stock · 88 pcs
Product codeO18SM050-OVR18PZCL
€1.30incl. VAT

Lowest price in the last 30 days: €1.30

Volume pricing
1–199 pcs€1.30Your price
200–999 pcs€1.19−8 %
1000–4999 pcs€1.14−12 %
from 5000 pcs€1.03−21 %

Total for 1 pcs: €1.30

Quantities add up across all combinations of this bottle.

Product description

This glass bottle with a fine mist sprayer, 50 ml, is intended for filling liquid cosmetic products that are applied by spraying. Blue glass lets less light through to the contents than clear glass, which helps when storing light-sensitive ingredients such as hydrosols, toners with active ingredients or eau de parfum. The black and gold glossy sprayer with a smoky overcap gives the finished product a darker, cohesive look.

The set is supplied as a ready-made bottle and closure pair that fit together without any further matching. The bottle is shaped like a medicine bottle with a narrow neck and sits well in the hand during application.


What it is suitable for

  • Facial toners and hydrosols – thin water-based products are applied with the sprayer as an even mist, without hands touching the skin.
  • Eau de parfum and fragrance sprays – alcohol-based solutions of fragrance compositions, where dark glass slows down light-induced changes in the scent.
  • Hair and body mists – light water-based or water-alcohol formulations that are meant to spread over a larger area.
  • Refreshing sprays for hands or textiles – here a precise dose per press is useful.

The 50 ml volume is a convenient travel and handbag size. It is also suitable for samples and smaller batches when testing a recipe.


Filling and volume

Nominal volume is the amount the bottle is designed for in normal filling, in this case 50 ml. The brimful capacity given in the parameters is the physical volume up to the neck. The difference between them provides room for the dip tube and the sprayer mechanism and for the expansion of the contents when the temperature changes. The bottle is therefore filled up to the nominal volume, not to the brim. If it is overfilled, the contents are pushed out through the neck when the sprayer is screwed on and some of it remains on the thread.

After filling, first prime the sprayer by pressing it several times so that the tube and the pump chamber fill with liquid. Only then does it deliver an even dose.


Good to know

Before the first filling, the bottle is washed, disinfected with isopropyl alcohol or ethanol and left to dry completely. The sprayer is cleaned by flushing clean water or alcohol through the pump, not by soaking the whole mechanism, so that no water is left inside it.

The sprayer is designed for low-viscosity liquids. It sprays water-based solutions, hydrosols and alcohol-based products as a mist. With oils, thicker serums or emulsions, the spray turns into drops and the mechanism may become clogged. We recommend testing how your specific recipe behaves on a small amount before filling the whole batch. The same applies to products with a high proportion of essential oils or solvents that come into contact with the plastic parts of the pump.

Do not pour hot products into the glass. Let the water phase, surfactant solution or perfume blend cool to room temperature before filling. Sudden heating or rapid cooling of the walls can cause the glass to crack.

Both the bottle and the sprayer are declared suitable for contact with cosmetic products. The declaration of conformity is available with the product. The set is not approved for contact with food.

After use, the glass is sorted into glass waste. The sprayer combines plastic with an aluminium collar, so it should be separated from the bottle before recycling.

The bottle has an 18/410 neck finish and the sprayer an 18/415 one, and the set is matched so that the parts fit each other. If you choose a different closure, follow the neck finish given in the parameters and check the seal with your formulation.

You can find other closures with the same neck finish and ready-made packaging and closure combinations in the Handymade range.


Frequently asked questions

Does the blue glass of the bottle protect the contents from light?
Blue glass lets less light through to the contents than clear glass, and so it helps slow down changes in light-sensitive ingredients. It is suitable for hydrosols, toners with vitamins or plant extracts, and eau de parfum. However, the glass does not provide complete protection from light, so we recommend keeping the bottle out of direct sunlight.
Can the 50 ml glass bottle with a sprayer be used for an oil serum?
The sprayer is not suitable for pure oils and thicker serums. The pump is designed for thin water-based or alcohol-based liquids. With oils it dispenses drops instead of a mist, and the mechanism gradually becomes clogged. For oils, choose a closure with a dropper. With light oil blends, we recommend testing the behaviour on a small amount first.
How many ml does the sprayer dispense per press?
The sprayer releases approximately 0.14 ml per full press. With a typical facial toner this corresponds to a fine mist for one application, and with eau de parfum to one spray. The actual dose also depends on the viscosity and alcohol content of the product, so when calculating consumption it is better to weigh the dose in the finished formulation.
Up to how many ml is the bottle filled when its brimful capacity is greater than 50 ml?
It is filled up to the nominal volume of 50 ml. The remainder up to the brim serves as room for the dip tube and the body of the sprayer and for the expansion of the liquid when the temperature changes. If the bottle is filled to the brim, the contents are pushed out when the sprayer is screwed on and remain on the thread, where they dry and stick.
Can I reuse the bottle with the sprayer?
Yes, after washing and disinfecting with isopropyl alcohol or ethanol, the glass bottle can be filled again. Before further use, flush the sprayer with clean water or alcohol through the pump and let it dry. When changing the contents, for example from eau de parfum to a facial toner, it is better to replace the sprayer, because residues of scent in the tube and the pump chamber are difficult to remove.

Parameters

Glass bottle, pharmaceutical, blue, 18 mm, 50 ml

Product colour
Blue
Country of origin
China
Nominal capacity
50
Brimful capacity
57 ml
Diameter
37,2 mm
Thread type
18/410
Height
92,2 mm
Product material
Glass

Plastic fine mist sprayer, glossy black and gold, smoked cap, 18/415

Product colour
BlackGold
Country of origin
China
Diameter
23 mm
Thread type
18/415
Height
40,81 mm
Tube length
115 mm
Dose
0,14 ml

Product documentation

PPWRPackaging Declaration (PPWR)
Glass bottle, pharmaceutical, blue, 18 mm, 50 ml · O18SM050PDF ↓
PDSProduct Data Sheet
Glass bottle, pharmaceutical, blue, 18 mm, 50 ml · O18SM050PDF ↓
Plastic fine mist sprayer, glossy black and gold, smoked cap, 18/415 · OVR18PZCLPDF ↓
DrawingTechnical drawing
Glass bottle, pharmaceutical, blue, 18 mm, 50 ml · O18SM050PDF ↓
Plastic fine mist sprayer, glossy black and gold, smoked cap, 18/415 · OVR18PZCLPDF ↓
Download all (ZIP)

5 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.