GLASS BOTTLES 30 ml
Blue Glass Bottle, Glossy Gold Black Spray, Smoky Overcap, 30 ml
Pack size10 ml15 ml30 ml50 ml100 ml
A blue glass bottle with a volume of 30 ml and a black and gold fine mist sprayer with a smoky overcap is a ready-made set for filling with liquid products that are applied as a spray. full description
Lowest price in the last 30 days: €1.14
Total for 1 pcs: €1.14
Quantities add up across all combinations of this bottle.
Product description
A blue glass bottle with a volume of 30 ml and a black and gold fine mist sprayer with a smoky overcap is a ready-made set for filling with liquid products that are applied as a spray. The blue glass reduces the amount of light reaching the contents, which suits hydrosols, toners and perfume waters with essential oils, as these lose their fragrance or change colour more quickly in light. The volume is suitable for a travel pack, a sample for a customer or a smaller batch that you use up within a few weeks.
The set consists of two components: a glass medicine bottle with an 18 mm neck and a plastic sprayer in a glossy black and gold finish. The clear overcap in a smoky shade protects the nozzle from dust and accidental pressing in a bag, and the sprayer head remains visible through it. Both the bottle and the sprayer are declared as suitable for contact with cosmetic products.
What it is suitable for
- Facial toners and hydrosols – aqueous solutions are sprayed evenly and the blue glass reduces light better than clear bottles.
- Perfume and body waters – the glass resists alcohol and the small pack works as a fragrance sample or for a handbag.
- Refreshing sprays for face and hair – thin liquids with glycerine, aloe or soluble active ingredients, where a spray is more convenient than pouring into the palm.
Filling and volume
The nominal volume of 30 ml is the amount the bottle is designed for in normal filling. The brimful volume given in the parameters is slightly larger and represents the physical volume up to the neck. The difference serves as a reserve for the dip tube of the sprayer and for the expansion of the contents with temperature changes. The bottle should therefore be filled to the nominal volume, not to the brim, otherwise the contents will overflow when the sprayer is screwed on.
Before the first filling, we recommend washing the bottle and the sprayer, disinfecting them with isopropyl alcohol or ethanol and letting them dry completely. Proceed in the same way for repeated use, especially if the type of contents changes.
If the dip tube of the sprayer is longer than the bottle and bends after screwing on, shorten it with a sharp knife or scissors so that it ends just above the bottom. The sprayer will then draw up the contents down to the last millilitres and the tube will not kink.
Sprayer and dispensing
The sprayer works mechanically, without a propellant. Each press releases a small measured dose in the form of a dispersed mist, and the exact amount is given in the parameters. On first use, the head needs to be pressed several times until the tube and the mechanism fill with liquid and an even spray begins to form.
The nozzle is designed for thin liquids: water, hydrosols, alcohol solutions and aqueous serums with low viscosity. Thickened gels, emulsions and dense oils will not be sprayed through it or will clog the mechanism. For pure vegetable oils and blends with a high proportion of essential oils, we recommend testing them in the set first: check whether a spray forms, whether the head becomes sticky over time and whether the plastic parts change.
With formulas containing dissolved solids (salts, extracts, powders), the spray narrows or turns into a jet once residues dry in the nozzle. After use, spray clean water through the sprayer and let it dry with the nozzle facing up.
Good to know
Glass does not absorb fragrances or dyes, so after thorough washing the bottle can be refilled with different contents. The plastic parts of the sprayer may partly retain the fragrance of the previous filling, so when changing the type of product it is advisable to use a new sprayer.
Glass reacts sensitively to sudden changes in temperature. Do not pour hot liquids into the bottle; let the contents cool to room temperature first. When filling and transporting, bear in mind that the bottle may break if dropped.
The set is intended for cosmetic products. The declaration of conformity and the certificate for contact with cosmetics are provided with the product; this set does not have a declaration for contact with food.
Closures with the same type of neck as stated in the bottle parameters, as well as other ready-made combinations, can be found in the Handymade range. For your own combination, we recommend checking the tightness, dispensing and behaviour of the packaging with your specific formulation.
At the end of use, the bottle belongs in glass recycling. The sprayer is made of plastic and aluminium, so it should be sorted according to the rules in your municipality.
Frequently asked questions
Parameters
Glass bottle, vial, blue, 18 mm, 30 ml
Product documentation
- PPWRPackaging Declaration (PPWR)
- PDF ↓
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.
























































































