GLASS BOTTLES up to 10 ml
Blue Glass Bottle, Glossy Gold Black Spray, Smoky Overcap, 10 ml
Pack size10 ml15 ml30 ml50 ml100 ml
A blue glass bottle with a nominal volume of 10 ml and a black and gold fine mist sprayer with a smoky overcap is a ready-made set for small packs of liquid products applied by spraying. full description
Lowest price in the last 30 days: €1.04
Total for 1 pcs: €1.04
Quantities add up across all combinations of this bottle.
Product description
A blue glass bottle with a nominal volume of 10 ml and a black and gold fine mist sprayer with a smoky overcap is a ready-made set for small packs of liquid products applied by spraying. Coloured glass lets through less light than clear glass, so it suits hydrosols, facial toners and fragrance compositions with essential oils. Each press of the sprayer releases a small dose dispersed into a mist, so the product is applied evenly and without your hands touching the contents. You can use the set for samples, testers, travel and handbag-sized packs, or for trying out a new fragrance before making a larger quantity.
The glossy black and gold head and the translucent smoky overcap give the small bottle the look of a finished product, which you will appreciate in gift packs and when selling samples. The overcap also protects the nozzle from dust and from accidental pressing in a bag.
What the set is suitable for
- Perfumes and fragrance sprays – alcohol-based compositions, eaux de parfum and body or hair fragrance mists spray well, and the small volume lets you offer a fragrance as a sample too.
- Hydrosols and facial toners – water-based products without thickeners are applied to the face as a refreshing mist.
- Sprays with active ingredients – light water-based or water-alcohol solutions for the skin, scalp or hands, where you want more precise dispensing than when pouring from a bottle.
- Testers and travel packs – the bottle fits into any bag, and the volume is more than enough for trying out a perfume or a refreshing spray.
How to work with the set
The sprayer is screwed onto the bottle after filling. The tube reaches the bottom and draws in the contents when the head is pressed. The first several presses after filling serve to prime the system, and only then does the set start to dispense consistently. You will find the exact amount of one dose in the parameters. It is useful when calculating how many presses correspond to the recommended amount of the product.
The sprayer is designed for liquid products of low viscosity. Water-based solutions, hydrosols, alcohol compositions and very light oils pass through the nozzle without problems. For thick products, choose a dropper or a pump for the same neck type instead.
If you want to carry an oil-based perfume in the set, dilute the fragrance composition in a light carrier and test the spraying on a single bottle before filling the whole batch. The behaviour of the nozzle depends on the viscosity of the particular formulation.
Nominal and total volume
The nominal volume is the amount the bottle is intended for in normal filling. The total volume to the brim, given in the parameters, is the physical volume of the glass up to the neck. The difference between them is a reserve for the tube and the body of the sprayer, which take up part of the space once screwed on, and for the expansion of the contents with changes in temperature. The bottle should therefore be filled up to the nominal volume. If it is filled to the brim, the contents are pushed out through the neck when the sprayer is fitted and contaminate the thread, which then seals less well.
Good to know
- Preparation before the first filling – wash the bottle and the sprayer, disinfect them with isopropyl alcohol or ethanol and let them dry completely. Spray alcohol or clean water through the sprayer tube.
- Contact with cosmetics – the bottle and the sprayer are declared suitable for use with cosmetic products. The set is not declared for contact with food, so do not use it for food extracts or flavoured cooking oils.
- Sprayer material – the sprayer combines polypropylene, aluminium and other plastics. For compositions with a high proportion of essential oils, citrus essential oils or solvents, we recommend checking the tightness and the behaviour of the plastic parts in the finished formulation, ideally several weeks before larger production.
- Reuse – after thorough washing and disinfection, the glass can be filled again. Before further use, rinse the sprayer with alcohol and spray it through. When changing the fragrance, bear in mind that the plastic parts may retain some of the previous scent.
- Closures – you will find other closures with the same neck type, as well as ready-made bottle and closure combinations, in the Handymade range. If you make your own combination, we recommend checking the tightness and the dispensing with your particular formulation.
Do not fill the sprayer with emulsions, creams, gels or thickened toners. They will either come out in a stream instead of forming a mist, or clog the nozzle over time.
Frequently asked questions
Parameters
Glass bottle, vial, blue, 10 ml
Product documentation
- PPWRPackaging Declaration (PPWR)
- PDF ↓
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.





















































































