GLASS BOTTLES 15 ml
Blue Glass Bottle, Glossy Gold Black Spray, Smoky Overcap, 15 ml
Pack size10 ml15 ml30 ml50 ml100 ml
Blue glass medicine bottle, black and gold fine mist sprayer, smoky overcap, 15 ml Blue glass lets through less light than clear glass, so this small bottle with a sprayer suits liquid products that lose their… full description
Lowest price in the last 30 days: €1.04
Save €0.04 with this set
Total for 1 pcs: €1.04
Quantities add up across all combinations of this bottle.
Product description
Blue glass medicine bottle, black and gold fine mist sprayer, smoky overcap, 15 ml
Blue glass lets through less light than clear glass, so this small bottle with a sprayer suits liquid products that lose their effectiveness or fragrance in the light: toners and facial mists with active ingredients, hydrosols, perfume waters and refreshing hair and body sprays. Its nominal volume of 15 ml makes it a travel or sample size that fits into a handbag or a sample box.
The set is supplied assembled from two parts. The body of the packaging is a glass medicine bottle in a shade of blue, and a glossy black and gold sprayer with a clear smoky overcap releases the contents as a fine mist. The overcap protects the button from being pressed accidentally during transport and does not hide the colour of the closure.
What the set is suitable for
The sprayer works with thin, watery or alcohol-based liquids. This packaging is therefore suitable mainly for:
- Facial toners and mists – water-based solutions with glycerine, hyaluronic acid or plant extracts, applied directly to the face without your hands touching the contents.
- Hydrosols – the closed system with a sprayer limits repeated opening of the bottle, and with it the access of air and impurities to the contents.
- Perfume waters and body sprays – alcohol-based compositions, where the fine mist spreads the fragrance evenly.
- Hair sprays and refreshers – thin solutions dispensed in small amounts.
- Samples – for a series of fragrances or toners, a small volume is enough for trying them out.
Thick serums, oils and emulsions cannot be dispensed reliably through a sprayer. The nozzle becomes blocked and a stream or drops are produced instead of a mist. For oil-based products, a dropper or a pump with the same neck is more suitable.
Volume and filling
The nominal volume is the amount the packaging is designed for under normal filling. The total volume to the brim, given in the parameters, is the physical volume of the bottle up to the neck. The difference between the two values provides a reserve for the dip tube of the sprayer and for the expansion of the contents when the temperature changes. The bottle should therefore be filled up to the nominal volume. An overfilled bottle overflows through the thread once the sprayer is screwed on.
One press releases approximately 0.14 ml of the contents, which, when the bottle is filled to the nominal volume, corresponds to roughly one hundred presses.
Before first use, press the sprayer several times to prime it until the tube and the pump fill with liquid. Only then does it begin to release an even mist.
Good to know
Before first filling, wash the bottle, rinse it with ethanol or isopropyl alcohol and leave it to dry completely. It is enough to rinse the sprayer with clean water or alcohol, or to press it several times with clean liquid, to remove production residues from the inside.
The dip tube of the sprayer is longer than the height of this bottle requires. If it bends or rests on the bottom when screwed in, shorten it with a sharp knife using a diagonal cut so that it ends just above the bottom. The diagonal end does not stick to the glass and the sprayer draws up even the last millilitres of the contents.
For alcohol-based perfume compositions and products with a higher proportion of essential oils, we recommend checking how the sprayer behaves with your specific formulation before filling a larger batch: the tightness of the thread, the stability of the mist after several days and whether the contents change the colour of the plastic parts. Both parts of the set have a neck of the same diameter, and you will find the exact thread type of each in the parameters. You can also combine the bottle with other closures with the same neck from the Handymade range, but always check the tightness and dispensing of your own combination.
The sprayer has a declaration of suitability for contact with cosmetic products. The glass bottle on its own does not have this declaration, so the set as a whole has no declaration of its own and is not intended for contact with food.
After thorough washing and disinfection, the glass can be reused. When the sprayer is reused, rinse it and leave it to dry. When changing the type of contents, for example from perfume water to hydrosol, it is safer to use a new one. At the end of their life, separate the two parts by unscrewing them. The bottle belongs in glass recycling, and the sprayer combines plastic with aluminium.
Frequently asked questions
Parameters
Glass bottle, vial, blue, 18 mm, 15 ml
Product documentation
- PPWRPackaging Declaration (PPWR)
- PDF ↓
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.
























































































